4 Oct
2013
4 Oct
'13
6:57 a.m.
Hi,
I'm running stock Debian Wheezy (7.1) --- except for a kernel upgrade
(3.10-0.bpo.2-amd64) from Debian backports --- as well as XFCE, on a
couple different hardware configs. However, I'm struggling to get
audio to work properly on my new Intel Haswell board.
(1) On a Thinkpad x220: Audio works great, out of the box
(2) On a Supermicro X10SLQ (Q87 chipset) with Haswell i4770S: Audio
doesn't work at all --- no audio at all comes out of standard
rear headphone jack. (NOTE: Supermicro website identifies audio
capabilities as provided by onboard RealTek ALC888S chipset, but
lspci [below] instead identifies Intel HDA audio, courtesy of
Haswell. I worry that this might be an issue.)
Could this be an issue with the kernel, or should I be looking
elsewhere. I was under the belief that 3.10 (unlike the 3.2 kernel
that shipped with Wheezy) had fairly comprehensive support for Haswell
in general!
Some more information is attached below...
I don't have much experience trouble-shooting audio problems, so I
appreciate any suggestions / pointers.
Thanks!
----------------------------------------------------------------------
guest@haswell:~$ lspci -v | grep -i -A8 audio
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
Subsystem: Intel Corporation Device 2010
Flags: bus master, fast devsel, latency 0, IRQ 52
Memory at f0534000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
--
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev
04)
Subsystem: Super Micro Computer Inc Device 0654
Flags: bus master, fast devsel, latency 0, IRQ 53
Memory at f0530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: snd_hda_intel
guest@haswell:~$ lsmod | grep snd
snd_hda_codec_realtek 32712 1
snd_hda_codec_hdmi 31720 1
snd_hda_intel 35718 5
snd_hda_codec 122850 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13189 1 snd_hda_codec
snd_pcm 68525 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 13018 2 snd_pcm,snd_hda_intel
snd_seq 45186 0
snd_seq_device 13176 1 snd_seq
snd_timer 22773 2 snd_pcm,snd_seq
snd 53068 19
snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 13026 1 snd
guest@haswell:~$ dmesg | grep -i sound
[ 2.007991] input: HDA Intel MID HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 2.008079] input: HDA Intel MID HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 2.008131] input: HDA Intel MID HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 2.034368] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.034620] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.034834] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.035018] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.035199] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.035383] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 2.035565] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input15
guest@haswell:~$
4 Oct
4 Oct
9:59 a.m.
dafreedm(a)gmail.com wrote:
00:03.0 Audio device: Intel Corporation Haswell HD
Audio Controller (rev 06)
This is the HDMI output of the integrated GPU.
00:1b.0 Audio device: Intel Corporation Lynx Point
High Definition Audio Controller (rev 04)
This is the HDA controller that the HDA codec (the ALC888S) is connected to.
Tell PulseAudio that you want to use the other card.
If you don't use PA, put the following into /etc/asound.conf:
defaults.pcm.card 1
defaults.ctl.card 1
Regards,
Clemens
6:38 p.m.
Hi (Clemens and all),
Thanks for the quick helpful reply --- it does appear that I was quite
confused (I'm more accustomed to Linux server admin than desktop
configs, I fear), incorrectly assuming the issue was with Haswell
support... However, I'm still having issues. More inline below.
On Fri, Oct 04, 2013, Clemens Ladisch wrote:
Yep, here's my Realtek chipset giving analog audio.
dafreedm(a)gmail.com wrote:
Gotcha --- I now understand that this is the digital audio coming over
the HDMI / DP aggregated video/audio outs.
00:03.0 Audio device: Intel Corporation Haswell
HD Audio Controller (rev 06)
This is the HDMI output of the integrated GPU. 00:1b.0 Audio
device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
This is the HDA controller that the HDA codec (the ALC888S) is connected to. Tell PulseAudio that you want to use the other card.
I'm not at all familiar with PA, but I read up on it a bit after your
pointer. I consulted the following pages:
http://askubuntu.com/questions/14077/how-can-i-change-the-default-audio-dev…
http://askubuntu.com/questions/71863/how-to-change-pulseaudio-sink-with-pac…
http://askubuntu.com/questions/69820/how-do-i-set-a-pulseaudio-card-profile…
https://wiki.archlinux.org/index.php/PulseAudio/Examples
Here's what I actually did.
(1) I modified '/etc/pulse/default.pa' to include:
load-module module-stream-restore restore_device=false
Was this really necessary (for below steps)?
(2) I restarted the pulse audio server by logging out (and back in),
since I don't use system-wide PA (which could be restarted by
init scripts)
(3) I executed the following:
pacmd set-default-sink 1
In retrospect, I don't think this was necessary, as I now
believe that the Realtek audio card was already the default.
(4) I can now successfully hear audio. Great!
(5) However, it seems like I cannot properly get audio working for
multiple users logged into X simultaneously (switching between
them via XFCE user-switching and GDM greeter), where both are
using various pulse-audio sources... I would expect (want?) PA
to just cut from one use to the other, depending upon which user
is the active X screen.
Thoughts on this remaining problem (#5, above), please?
I've attached some output from 'aplay -l' and 'pacmd info' to the
bottom of this email, in case it helps. Further suggestions greatly
appreciated.
Thanks!
-----------------------------------------------------------------------
output from 'aplay -l'
======================
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC888-VD Analog [ALC888-VD Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC888-VD Digital [ALC888-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
Output from 'pacmd info'
========================
Welcome to PulseAudio! Use "help" for usage information.
>> Memory blocks currently allocated: 43, size:
208.6 KiB.
Memory blocks allocated during the whole lifetime: 558163, size: 924.4
MiB.
Memory blocks imported from other processes: 42, size: 144.7 KiB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 1 allocated/174265 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/239812 accumulated.
Memory blocks of type IMPORTED: 42 allocated/144086 accumulated.
25 module(s) loaded.
<snip>
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 0 <alsa_card.pci-0000_00_03.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf0534000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Haswell HD Audio Controller"
device.form_factor = "internal"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Built-in Audio Digital Stereo (HDMI)"
alsa.mixer_name = "Intel Haswell HDMI"
alsa.components = "HDA:80862807,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, available: no)
properties:
active port: <hdmi-output-0>
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME
DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 84% 1: 84%
0: -4.40 dB 1: -4.40 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: yes
current latency: 25.26 ms
max request: 4 KiB
max rewind: 64 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 26.00 ms; range is 26.00 .. 371.52 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888-VD Analog"
alsa.id = "ALC888-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0530000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Lynx Point High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888-VD"
alsa.components = "HDA:10ec0888,15d90654,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: unknown)
properties:
active port: <analog-output>
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_03.0>
module: 4
properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf0534000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Haswell HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 64 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 371.52 ms; range is 26.00 .. 371.52 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0530000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Lynx Point High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 15% 1: 15%
0: -49.00 dB 1: -49.00 dB
balance 0.00
base volume: 10%
-60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888-VD Analog"
alsa.id = "ALC888-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0530000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Lynx Point High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888-VD"
alsa.components = "HDA:10ec0888,15d90654,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
active port: <analog-input-linein>
21 client(s) logged in.
index: 1
driver: <module-console-kit.c>
owner module: 13
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session12"
console-kit.session = "/org/freedesktop/ConsoleKit/Session12"
index: 9
driver: <module-console-kit.c>
owner module: 13
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session19"
console-kit.session = "/org/freedesktop/ConsoleKit/Session19"
index: 12
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10462"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-volumed"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 13
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10462"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-volumed"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 14
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10462"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-volumed"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 15
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10462"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-volumed"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 16
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10462"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-volumed"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 19
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-mixer-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10474"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer-plugin"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 20
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-mixer-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10474"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer-plugin"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 21
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-mixer-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10474"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer-plugin"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 22
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-mixer-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10474"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer-plugin"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 23
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "xfce4-mixer-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10474"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer-plugin"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 27
driver: <module-x11-xsmp.c>
owner module: 23
properties:
application.name = "XSMP Session on xfce4-session as
255c9a9ab-484f-4cf3-99a4-1c68ee373ba5"
xsmp.vendor = "xfce4-session"
xsmp.client.id = "255c9a9ab-484f-4cf3-99a4-1c68ee373ba5"
index: 34
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "ALSA plug-in [plugin-container]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10541"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "plugin-container"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
index: 71
driver: <module-console-kit.c>
owner module: 13
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session31"
console-kit.session = "/org/freedesktop/ConsoleKit/Session31"
index: 84
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "Mixer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "14066"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
application.icon_name = "multimedia-volume-control"
index: 85
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "Mixer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "14066"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
application.icon_name = "multimedia-volume-control"
index: 86
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "Mixer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "14066"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
application.icon_name = "multimedia-volume-control"
index: 87
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "Mixer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "14066"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
application.icon_name = "multimedia-volume-control"
index: 88
driver: <protocol-native.c>
owner module: 7
properties:
application.name = "Mixer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "14066"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "xfce4-mixer"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
application.icon_name = "multimedia-volume-control"
index: 110
driver: <cli.c>
owner module: 24
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_03.0>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf0534000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Haswell HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300)
output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output (priority 5200)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Output (priority 100)
output:hdmi-stereo-extra2: Digital Stereo (HDMI) Output (priority 5200)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI) Output (priority 100)
off: Off (priority 0)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_00_03.0.hdmi-stereo/#0: Built-in Audio Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor/#0: Monitor of Built-in Audio Digital
Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, available: no)
properties:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, available: no)
properties:
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, available: no)
properties:
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 5
properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0530000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "Lynx Point High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
output:analog-surround-40: Analog Surround 4.0 Output (priority 700)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog
Stereo Input (priority 760)
output:analog-surround-41: Analog Surround 4.1 Output (priority 800)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog
Stereo Input (priority 860)
output:analog-surround-50: Analog Surround 5.0 Output (priority 700)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog
Stereo Input (priority 760)
output:analog-surround-51: Analog Surround 5.1 Output (priority 800)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog
Stereo Input (priority 860)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo
Input (priority 5560)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Off (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#1: Monitor of Built-in Audio Analog
Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#2: Built-in Audio Analog Stereo
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: unknown)
properties:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, available: unknown)
properties:
1 sink input(s) available.
index: 2
driver: <protocol-native.c>
flags:
state: RUNNING
sink: 1 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: 0: 84% 1: 84%
0: -4.40 dB 1: -4.40 dB
balance 0.00
muted: no
current latency: 454.78 ms
requested latency: 20.00 ms
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: (null)
module: 7
client: 34 <ALSA plug-in [plugin-container]>
properties:
media.name = "ALSA Playback"
application.name = "ALSA plug-in [plugin-container]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "10541"
application.process.user = "dafreedm"
application.process.host = "workstation"
application.process.binary = "plugin-container"
window.x11.display = ":2.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "6z782a30g5fe1b102b1f2d8e1214fc0b"
application.process.session_id =
"6z782a30g5fe1b102b1f2d8e1214fc0b-1380896648.49883-584497463"
module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in
[plugin-container]"
0 source outputs(s) available.
0 cache entrie(s) available.
>>
4102
days inactive
4102
days old
linux-audio-user@lists.linuxaudio.org
2 comments
2 participants
participants (2)
-
Clemens Ladisch -
dafreedm＠gmail.com