20 Jan
2003
20 Jan
'03
11:06 a.m.
Hi,
I've downloaded and compiled speak-freely 7.5. I have 2 lan
connected machines. I run sfpeaker on one machine, and sfmike 'IP
address' on the other. Everything appears to have compiled correctly and
everything appears to run correctly but I'm not getting any audio across
the network! Any suggestions?
I also find that when the machines are on but not running any
applications that the speakers on each machine plays any audio directed
into its own microphone, as if the mic on each machine is looped
directly out through its own speakers. Is this normal? Any help is much
appreciated.
Regards,
R.C.
-----Original Message-----
From: linux-audio-user-admin(a)music.columbia.edu
[mailto:linux-audio-user-admin@music.columbia.edu] On Behalf Of
linux-audio-user-request(a)music.columbia.edu
Sent: 20 January 2003 09:54
To: linux-audio-user(a)music.columbia.edu
Subject: linux-audio-user digest, Vol 1 #200 - 14 msgs
Send linux-audio-user mailing list submissions to
linux-audio-user(a)music.columbia.edu
To subscribe or unsubscribe via the World Wide Web, visit
http://music.columbia.edu/mailman/listinfo/linux-audio-user
or, via email, send a message with subject or body 'help' to
linux-audio-user-request(a)music.columbia.edu
You can reach the person managing the list at
linux-audio-user-admin(a)music.columbia.edu
When replying, please edit your Subject line so it is more specific
than "Re: Contents of linux-audio-user digest..."
Today's Topics:
1. Re: Rhodes sound (Guy Clotilde)
2. Re: Rhodes sound (Larry Troxler)
3. Re: Rhodes sound (Guy Clotilde)
4. Re: Rhodes sound (Guy Clotilde)
5. Re: Which audio card to use? (Jack O'Quin)
6. Re: Rhodes sound (Matthew Yee-King)
7. [OT] Linux Music & Sound Software site updated (Dave Phillips)
8. Re: Which audio card to use? (Paul Winkler)
9. Re: Which audio card to use? (Jan "Evil Twin" Depner)
10. Re: Rhodes sound (Emiliano Grilli)
11. seeking a software sampler for Linux (Florian Berger)
12. Re: seeking a software sampler for Linux (Emiliano Grilli)
13. Re: seeking a software sampler for Linux (Vincent Touquet)
14. Re: Rhodes sound (Patrick Shirkey)
--__--__--
Message: 1
Date: Sun, 19 Jan 2003 21:00:31 +0400
From: Guy Clotilde <guy.clotilde(a)wanadoo.fr>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Organization: perso
Reply-To: linux-audio-user(a)music.columbia.edu
On/le Sat, 18 Jan 2003 09:59:45 -0500
Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme:
yep. My original Fender Rhodes and others I have played on react in a so
smooth way. :)
Cheers
Guy CLO~
-----------------------------------------------
#ICQ 37736372
-----------------------------------------------
http://perso.wanadoo.fr/guy.clotilde/index.html
-----------------------------------------------
EXPRESSO, Jazz, Funk & Musique Latine
http://perso.wanadoo.fr/guy.clotilde/Expresso/
-----------------------------------------------
(°V°)
--__--__--
Message: 4
Date: Sun, 19 Jan 2003 23:12:00 +0400
From: Guy Clotilde <guy.clotilde(a)wanadoo.fr>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Organization: perso
Reply-To: linux-audio-user(a)music.columbia.edu
On/le Sun, 19 Jan 2003 12:25:30 -0500
Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme:
--__--__--
Message: 7
Date: Sun, 19 Jan 2003 18:48:53 -0500
From: Dave Phillips <dlphilp(a)bright.net>
To: LAU Mail <linux-audio-user(a)music.columbia.edu>du>,
LAD Mail <linux-audio-dev(a)music.columbia.edu>du>, Linart
<linart(a)li.org>rg>,
CM/CLM/CMN/Snd mail-list <cmdist(a)ccrma.stanford.edu>du>,
Csound Mail <csound(a)lists.bath.ac.uk>uk>,
ALSA Users <alsa-user(a)lists.sourceforge.net>
Subject: [linux-audio-user] [OT] Linux Music & Sound Software site
updated
Reply-To: linux-audio-user(a)music.columbia.edu
Greetings:
As of January 19 2003 the Linux Music & Sound Applications pages have
been updated.
The site may be reached here:
http://sound.condorow.net (USA)
Here:
http://www.linuxsound.at (Europe)
And here:
http://www.ymo.org/linuxsound/ (Japan)
The Japanese site will not update until January 20.
Enjoy !
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at
http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org
--__--__--
Message: 8
Date: Sun, 19 Jan 2003 15:58:32 -0800
From: Paul Winkler <pw_lists(a)slinkp.com>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Which audio card to use?
Reply-To: linux-audio-user(a)music.columbia.edu
On Sun, Jan 19, 2003 at 05:21:40PM +0100, Christian Schoenebeck wrote:
have
Something interesting about the Rhodes electric piano, I found, was
that I played it quite differently from the way I would play an
accoustic piano.
The keys are lighter weighted too, between an organ and a classical
piano. That leaded to a whole different way to play it.
I like to compare the difference between an accoustic and an electric
guitar.
I wanted to add that the Rhodes is my alltime favourite instrument and
that it's perfect for funk :)
Pardon my bad english.
Guy CLO~
-----------------------------------------------
#ICQ 37736372
-----------------------------------------------
http://perso.wanadoo.fr/guy.clotilde/index.html
-----------------------------------------------
--__--__--
Message: 2
Date: Sun, 19 Jan 2003 12:25:30 -0500
From: Larry Troxler <lt(a)westnet.com>
Subject: Re: [linux-audio-user] Rhodes sound
To: linux-audio-user(a)music.columbia.edu
Reply-To: linux-audio-user(a)music.columbia.edu
Guy Clotilde wrote:
On/le Sat, 18 Jan 2003 09:59:45 -0500
Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme:
piano. That
leaded to a whole different way to play it.
Really? I remember the Rhodes action being quite muddy and heavy, to the
point that it required some real finger muscles.
Something interesting about the Rhodes electric piano, I found, was
that I played it quite differently from the way I would play an
accoustic piano.
The keys are lighter weighted too, between an organ and a classical I like to compare the difference between an accoustic
and an electric
guitar.
I wanted to add that the Rhodes is my alltime
favourite instrument and
that it's perfect for funk :)
Yup, just be carefull venturing more than an octave above middle C.
That's where you get into "light jazz" territory and you have to know
what you're doing there. Then again Chic Corea never had a problem
there, but I'm quite sure he knew what he was doing.
Pardon my bad english.
It's fine
Larry
--__--__--
Message: 3
Date: Sun, 19 Jan 2003 23:10:16 +0400
From: Guy Clotilde <guy.clotilde(a)wanadoo.fr>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Organization: perso
Reply-To: linux-audio-user(a)music.columbia.edu
On/le Sun, 19 Jan 2003 12:25:30 -0500
Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme:
The keys are
lighter weighted too, between an organ and a
classical piano. That leaded to a whole different way to play it.
Really? I remember the Rhodes action being quite muddy and heavy,
to the point that it required some real finger muscles. Yup, just be carefull venturing more than an octave
above middle C.
That's where you get into "light jazz" territory and you have to
know what you're doing there. Then again Chic Corea never had a
problem there, but I'm quite sure he knew what he was doing.
ahah. I'm not considering myself a good player nor a "jazzman". And I
really prefer Herbie Hancock, but we are going a little bit off-topic.
-----------------------------------------------
#ICQ 37736372
-----------------------------------------------
http://perso.wanadoo.fr/guy.clotilde/index.html
-----------------------------------------------
EXPRESSO, Jazz, Funk & Musique Latine
http://perso.wanadoo.fr/guy.clotilde/Expresso/
-----------------------------------------------
(°V°)
--__--__--
Message: 5
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Which audio card to use?
From: "Jack O'Quin" <joq(a)io.com>
Date: 19 Jan 2003 14:33:11 -0600
Reply-To: linux-audio-user(a)music.columbia.edu
Es geschah am Donnerstag, 16. Januar 2003 23:51 als
Jan \"Evil Twin\"
Depner
schrieb:
> ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine.
> Envy24control had some problems but when I talked it over with
Jaroslav
> he asked me to download the latest and check it.
All is well. No
> problems now.
Christian Schoenebeck <christian.schoenebeck(a)epost.de> writes:
I also downloaded the latest Envy24control
(alsa-tools-0.9.0rc6), but
it's
not working for me - at least not with ALSA 0.9rc6.
The VU meters
work, but
changing a slider or mute button for example does not
have any effect.
I compiled envy24control from a recent CVS version. It works and is
easily compiled all by itself. Just go to alsa-tools/envy24control
and run ./cvscompile (IIRC).
And another problem is the default clock rate of
48kHz. Setting the
master
clock to a value doesn't work. Clicking at
'Word Clock' decreases it,
but to
a widely too low value - sounds like 32kHz or
something...
This is a (serious) bug in the alsa-0.9.0rc6 ice1712 driver. There is
a fix in CVS, but I'm not using that yet because of the inconvenience
of upgrading the drivers.
As a workaround, I use envy24control (compiled as above). Under
"Hardware Settings" first set the "Master Clock" rate to "S/PDIF
In".
Then, set it to "Int 44100". For some reason, the rc6 driver won't
let you set "Int 44100" directly without using this trick.
So I guess I have to wait for the next Alsa release
and a new Debian
package,
cause compiling from CVS is too dirty for me.
Try a newer version of envy24control. It's easy to do, and I think
you'll be please with the result.
Regards,
--
Jack O'Quin
Austin, Texas, USA
--__--__--
Message: 6
Date: Sun, 19 Jan 2003 22:04:13 +0000
From: Matthew Yee-King <yeeking(a)no-future.com>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Reply-To: linux-audio-user(a)music.columbia.edu
i was just reading through lau seeing if anyone got the bristol synth
running and i saw your post frank. If you do any more remixes like that,
i think its only fair that you post some oggs. ;)
I always meant to do some joke remixes of christmas carols. I think your
heavily vibrato'd hammond could be pretty good for this. You'd need a
heavy beat on it too though.
- matthew
On Sat, 18 Jan 2003 16:15:42 +0100
Frank Barknecht <fbar(a)footils.org> wrote:
Hallo,
Dave Phillips hat gesagt: // Dave Phillips wrote:
> And I must protest Frank B's characterization of FM's "cheezy"
Rhodes
> sound ! ;-) My TX802 makes a better Rhodes sound
than the original,
and
the virtual
tines never break.
I think the "Rhodes" sound, or maybe it was called something else, of
the DX7 is one of the most famous FM sounds, and it even has been
overused. The STK FM examples don't emulate the DX7 but the TX81Z,
which might be similar to your synth. It uses only 4 operators instead
of the 6 in a DX7, but that's okay.
I recently had a lot of fun with them and the BeeThree when I was
looking for a short term birthday present.
I can't play the keyboard, so I downloaded a whole bunch of pop tunes
in midi format from midifarm.com and other sites, you know, real
"cheezy" stuff like "Mandy" or Pink's "Let's get this
party started"
and "arranged" these to use BeeThree instances with oodles of vibrato
for just about every voice except the drums, which I did with my
"angriff" Pd-drumset.
The result was absolutly hilarious IMO, very charming and amusing, and
the lenghth of a CD was quickly filled.
I was so impressed by my achievement, that I even re-used it for a
couple of next birthdays. ;)
ciao
--
Frank Barknecht _ ______footils.org__ Es geschah am Donnerstag, 16. Januar 2003 23:51 als
Jan \"Evil Twin\"
Depner
schrieb:
> Joe,
>
> ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine.
> Envy24control had some problems but when I talked it over with
Jaroslav
> he asked me to download the latest and check it.
All is well. No
> problems now.
>
> I also downloaded the latest Envy24control (alsa-tools-0.9.0rc6),
Note that Jan specifically said "latest CVS", not latest tarball
release.
The most recent tarball release, 0.9rc6, is known to be broken for
the ice1712... at least, envy24control is all fubar.
Sorry if I caused any confusion - in an earlier message I said to
get "latest" alsa for the ice1712, but I wasn't specific enough.
So I guess I have to wait for the next Alsa release
and a new Debian
package,
cause compiling from CVS is too dirty for me.
Sorry to hear it.
--
Paul Winkler
http://www.slinkp.com
Look! Up in the sky! It's OX ITE!
(courtesy of isometric.spaceninja.com)
--__--__--
Message: 9
Subject: Re: [linux-audio-user] Which audio card to use?
From: "Jan \"Evil Twin\" Depner" <eviltwin69(a)cableone.net>
To: Audio-User <linux-audio-user(a)music.columbia.edu>
Date: 19 Jan 2003 21:18:08 -0600
Reply-To: linux-audio-user(a)music.columbia.edu
When I said to download from CVS I meant all of the ALSA packages. If
you do that the clock is fixed.
Jan
On Sun, 2003-01-19 at 10:21, Christian Schoenebeck wrote:
Es geschah am Donnerstag, 16. Januar 2003 23:51 als
Jan \"Evil Twin\"
Depner
schrieb:
> Joe,
>
> ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine.
> Envy24control had some problems but when I talked it over with
Jaroslav
> he asked me to download the latest and check it.
All is well. No
> problems now.
>
I also downloaded the latest Envy24control
(alsa-tools-0.9.0rc6), but
it's
not working for me - at least not with ALSA 0.9rc6.
The VU meters
work, but
changing a slider or mute button for example does not
have any effect.
>
> And that is actually a bad situation as it seems that all outputs of
the
delta interface are set to max. volume by default. I
had to regulate
the
input amplifiers of my (external) mixer to zero (!)
and it's still
indicating
that the input levels are too high!!! Or is this
because I use
unbalanced
audio cables to connect the delta with my mixer? (the
delta 1010 has
balanced
> outputs)
>
And another problem is the default clock rate of
48kHz. Setting the
master
clock to a value doesn't work. Clicking at
'Word Clock' decreases it,
but to
a widely too low value - sounds like 32kHz or
something...
>
So I guess I have to wait for the next Alsa release
and a new Debian
package,
cause compiling from CVS is too dirty for me.
--__--__--
Message: 10
Date: Mon, 20 Jan 2003 09:44:32 +0100
From: Emiliano Grilli <emillo(a)libero.it>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Reply-To: linux-audio-user(a)music.columbia.edu
Anyone know how I can emulate a rhodes using the
computer keyboard?
A mix I'm working on really needs some hearty organ.
Patrick, somewere on my backup CDs I have a very good soundfont of a
fender rhodes (sampled from real instrument) it's about 4Mb and I have
to find it (this may take a couple of days) , so tell me if I can send
it to you directly.
Ciao
--
.---------------------.
| Emiliano Grilli |
| emillo(a)libero.it |
| Linux user #209089 |
'---------------------'
--__--__--
Message: 11
Date: Mon, 20 Jan 2003 10:10:56 +0100
From: Florian Berger <florib(a)arcor.de>
To: linux-audio-user(a)music.columbia.edu
Subject: [linux-audio-user] seeking a software sampler for Linux
Reply-To: linux-audio-user(a)music.columbia.edu
Hello to all,
I´m searching for some kind of a HALion replacement on Linux. Just a
simple engine that responses to MIDI Note on/off and Main Volume per
channel, and that can be triggered using some sequencer (as MUSE or
Rosegarden).
Any hint would be greatly appreciated.
Thank you,
Florian Berger, Leipzig, Germany
--__--__--
Message: 12
Date: Mon, 20 Jan 2003 10:40:50 +0100
From: Emiliano Grilli <emillo(a)libero.it>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] seeking a software sampler for Linux
Reply-To: linux-audio-user(a)music.columbia.edu
Hello to all,
I´m searching for some kind of a HALion replacement on Linux. Just a
simple engine that responses to MIDI Note on/off and Main Volume per
channel, and that can be triggered using some sequencer (as MUSE or
Rosegarden).
Any hint would be greatly appreciated.
Thank you,
Florian Berger, Leipzig, Germany
The two main choices that I'm aware of are:
* iiwusynth (http://www.hanappe.org/iiwusynth.html)
a soundfont-enabled sampler that is already included in MusE (click on
config-->Soft Synhtesizer, add an istance; click on Config-->Midi
ports, select the iiwu port and then click on "GUI": this brings up a
window in which you can choose a soundfont)
* timidity (http://www.onicos.com/staff/iz/timidity/),
that can be started in ALSA server mode (of course you must have ALSA
drivers, not OSS) like this: `timidity -iA -B2,8`.
You can load soundfonts by specifying them in the timidity.cfg
file (on my system is /usr/share/timidity/timidity.cfg) simply adding
the line
soundfont /path/to_my/soundfont.sf2
and comment out anything else.
You can find a huge amount of soundfonts on www.hammersound.net or you
can create your own with swami (http://swami.sourceforge.net/)
HTH
--
.---------------------.
| Emiliano Grilli |
| emillo(a)libero.it |
| Linux user #209089 |
'---------------------'
--__--__--
Message: 13
Date: Mon, 20 Jan 2003 10:47:24 +0100
From: Vincent Touquet <vincent.touquet(a)pandora.be>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] seeking a software sampler for Linux
Reply-To: linux-audio-user(a)music.columbia.edu
On Mon, Jan 20, 2003 at 10:10:56AM +0100, Florian Berger wrote:
Hello to all,
I?m searching for some kind of a HALion replacement on Linux. Just a
simple engine that responses to MIDI Note on/off and Main Volume per
channel, and that can be triggered using some sequencer (as MUSE or
Rosegarden).
This project is your biggest hope:
http://linuxsampler.sourceforge.net/
Also, check this mailinglist's archives,
this question has come up before ...
good luck,
v
--__--__--
Message: 14
Date: Mon, 20 Jan 2003 18:34:42 +0900
From: Patrick Shirkey <pshirkey(a)boosthardware.com>
Organization: Boost Hardware
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Rhodes sound
Reply-To: linux-audio-user(a)music.columbia.edu
Emiliano Grilli wrote:
Anyone know how I can emulate a rhodes using the
computer keyboard?
A mix I'm working on really needs some hearty organ.
Patrick, somewere on my backup CDs I have a very good soundfont of a
fender rhodes (sampled from real instrument) it's about 4Mb and I to find it (this may take a couple of days) , so
tell me if I can
send
it to you directly.
Absolutely.
That would be much appreciated.
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
--__--__--
_______________________________________________
linux-audio-user mailing list
linux-audio-user(a)music.columbia.edu
http://music.columbia.edu/mailman/listinfo/linux-audio-user
End of linux-audio-user Digest
21 Jan
21 Jan
4:29 a.m.
On/le Mon, 20 Jan 2003 15:03:35 -0000
"Richard Caldwell" <richardc(a)europlex.ie> wrote / a écrit quelque
chose comme:
Hi,
I've downloaded and compiled speak-freely 7.5. I have 2 lan
connected machines. I run sfpeaker on one machine, and sfmike 'IP
address' on the other. Everything appears to have compiled
correctly and everything appears to run correctly but I'm not
getting any audio across the network! Any suggestions?
It was a long time I've not tried again speak-freely.
Hi
I assume you have sfspeaker and sfmike on both machines, and each machine can ping the
other one.
Have you checked if the recordind is set to mic (aumix, alsamixer, etc.) ?
I also find that when the machines are on but not
running any
applications that the speakers on each machine plays any audio
directed into its own microphone, as if the mic on each machine is
looped directly out through its own speakers. Is this normal? Any
help is much appreciated.
Are you sure that sfmike is listening to the other machine's IP and not the IP of the
machine whereit's running?
have a nice day.
Guy CLO~
-----------------------------------------------
#ICQ 37736372
-----------------------------------------------
http://perso.wanadoo.fr/guy.clotilde/index.html
-----------------------------------------------
EXPRESSO, Jazz, Funk & Musique Latine
http://perso.wanadoo.fr/guy.clotilde/Expresso/
-----------------------------------------------
(°V°)
7979
days inactive
7980
days old
linux-audio-user@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Guy Clotilde -
Richard Caldwell