21 Jul
2009
21 Jul
'09
5:31 p.m.
I'm using Ardour 2.7.1 on Ubuntu and just hooked up my Korg nanokontrol
control surface
I assigned the faders and buttons to the mixer faders and solo/mute buttons
with the ctrl+middle click
no problem
works like a charm
I then assigned the play and stop buttons
again no problem
it starts and stops the playback as expected
the problem:
when I assign the 'go to start of session' on the transport section to
the return button on the nanokontrol it didn't work
ditto on the 'go to end of session' assign and usage
an 'operate controller now' box did come up
and when I pressed the 'rewind' button on the nano it disappeared
but neither the 'return' or 'end of session' buttons function when pushed
anyone know what I'm doing wrong here?
21 Jul
21 Jul
6:06 p.m.
New subject: [Ardour-Users] nanokontrol and go to start of session
You aren't doing anything wrong. This was looked into recently by a user, I
can't remember if he submitted a patch yet or is still looking into it, but
he found those controls don't seem to be bindable at this time IIRC. Don't
quote me on that, but I belive that is the case;)
Seablade
On Tue, Jul 21, 2009 at 3:31 PM, Kim Cascone <kim(a)anechoicmedia.com> wrote:
I'm using Ardour 2.7.1 on Ubuntu and just hooked
up my Korg nanokontrol
control surface
I assigned the faders and buttons to the mixer faders and solo/mute buttons
with the ctrl+middle click
no problem
works like a charm
I then assigned the play and stop buttons
again no problem
it starts and stops the playback as expected
the problem:
when I assign the 'go to start of session' on the transport section to the
return button on the nanokontrol it didn't work
ditto on the 'go to end of session' assign and usage
an 'operate controller now' box did come up
and when I pressed the 'rewind' button on the nano it disappeared
but neither the 'return' or 'end of session' buttons function when pushed
anyone know what I'm doing wrong here?
_______________________________________________
Ardour-Users mailing list
ardour-users(a)lists.ardour.org
http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
27 Jul
27 Jul
11:51 p.m.
how do I map the mixer to nano control if I dont have middle click?
also id I do have middle click how would one do it ie do I hover mouse etc.?
thanks
Thank you
Ronald Stewart
Creative Director
Trinity Audio Group Inc.
9854 National Blvd. #322
Los Angeles CA 90034
310-733-9285
ronaldjstewart(a)gmail.com
On Tue, Jul 21, 2009 at 2:31 PM, Kim Cascone <kim(a)anechoicmedia.com> wrote:
I'm using Ardour 2.7.1 on Ubuntu and just hooked
up my Korg nanokontrol
control surface
I assigned the faders and buttons to the mixer faders and solo/mute buttons
with the ctrl+middle click
no problem
works like a charm
I then assigned the play and stop buttons
again no problem
it starts and stops the playback as expected
the problem:
when I assign the 'go to start of session' on the transport section to
the return button on the nanokontrol it didn't work
ditto on the 'go to end of session' assign and usage
an 'operate controller now' box did come up
and when I pressed the 'rewind' button on the nano it disappeared
but neither the 'return' or 'end of session' buttons function when pushed
anyone know what I'm doing wrong here?
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
29 Jul
29 Jul
1:44 a.m.
Ronald Stewart wrote:
how do I map the mixer to nano control if I dont have
middle click?
also id I do have middle click how would one do it ie do I hover
mouse etc.?
thanks
Thank you
usually the OS can set a two button mouse to emulate a three button
mouse by sending a middle click when both left and right buttons are
pushed at the same time - up to recently this was set in xorg.conf, but
HAL is becoming the new way to do it. On many systems there is a GUI way
to make this setting.
After setting this up applications just receive the synthetic middle
click as they would a real one.
Simon
5848
days inactive
5856
days old
linux-audio-user@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Kim Cascone -
Ronald Stewart -
Simon Wise -
Thomas Vecchione