20 Jul
2011
20 Jul
'11
2:57 p.m.
Hi all,
i've recently bought a Behringer ADA8000 but i can't make it work with my
RME Multiface II. I can't get any signal from the RME ADAT input.
The Multiface II is set to master and the ADA8000 as slave and they are
connected via wordclock and with a toslink cable (ADA8000 out -> Multiface
II in). ADA8000 says it's locked, hdspconf says nothing is locked, and i
have no lights on or blinking on the front panel of the Multiface II.
Has anyone a clue?
Thank you in advance.
--
Giorgio Baù
*Sound engineer*
T.Rex Studio
www.trexstudio.com
21 Jul
21 Jul
3:32 p.m.
I've noticed something strange. When you start the card launching the
hdspmixer all levels (both inputs and outputs) raise up for a second. This
doesn't happen for the 8 ADAT ins.
Someone can help?
--
Giorgio Baù
*Sound engineer*
T.Rex Studio
www.trexstudio.com
24 Jul
24 Jul
10:38 a.m.
Maybe try a BNC coaxial cable?
Just in case it's some problem with the optical.
I've HDSP 9652 + ADA8000 synced via Adat, works like a charm.
On Wed, Jul 20, 2011 at 3:57 PM, Giorgio - Audiophilo <anomalsound(a)gmail.com
wrote:
Hi all,
i've recently bought a Behringer ADA8000 but i can't make it work with my
RME Multiface II. I can't get any signal from the RME ADAT input.
The Multiface II is set to master and the ADA8000 as slave and they are
connected via wordclock and with a toslink cable (ADA8000 out -> Multiface
II in). ADA8000 says it's locked, hdspconf says nothing is locked, and i
have no lights on or blinking on the front panel of the Multiface II.
Has anyone a clue?
Thank you in advance.
--
Giorgio Baù
*Sound engineer*
T.Rex Studio
www.trexstudio.com
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
11:34 a.m.
Den 24-07-2011 10:38, Moshe Werner skrev:
Maybe try a BNC coaxial cable?
Just in case it's some problem with the optical.
I've HDSP 9652 + ADA8000 synced via Adat, works like a charm.
On Wed, Jul 20, 2011 at 3:57 PM, Giorgio - Audiophilo
<anomalsound(a)gmail.com <mailto:anomalsound@gmail.com>> wrote:
Hi all,
i've recently bought a Behringer ADA8000 but i can't make it work
with my RME Multiface II. I can't get any signal from the RME ADAT
input.
The Multiface II is set to master and the ADA8000 as slave and
they are connected via wordclock and with a toslink cable (ADA8000
out -> Multiface II in). ADA8000 says it's locked, hdspconf says
nothing is locked, and i have no lights on or blinking on the
front panel of the Multiface II.
Has anyone a clue?
Thank you in advance.
--
Giorgio Baù
/Sound engineer/
T.Rex Studio
www.trexstudio.com <http://www.trexstudio.com/>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
<mailto:Linux-audio-user@lists.linuxaudio.org>
http://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Try toslink only, works for
me at a similar setup.
/Sv-e
1 Aug
1 Aug
9:27 p.m.
On 07/20/2011 02:57 PM, Giorgio - Audiophilo wrote:
Hi all,
i've recently bought a Behringer ADA8000 but i can't make it work with
my RME Multiface II. I can't get any signal from the RME ADAT input.
The Multiface II is set to master and the ADA8000 as slave and they are
connected via wordclock and with a toslink cable (ADA8000 out ->
Multiface II in). ADA8000 says it's locked, hdspconf says nothing is
locked, and i have no lights on or blinking on the front panel of the
Multiface II.
the way you describe it, you want to connect a microphone to your
ada8000 and get the signal into your computer, right?
if you want to set the rme to master (which is a good idea), make sure
it's using a samplerate that the behringer can do (i.e. 44k1 or 48k).
if the wc in doesn't work (which wouldn't surprise me), try running two
adat cables between the boxes (in and out) - that way, the behringer can
sync to the adat out of the multiface.
you do get sound in and out of your multiface via the analog i/o, do
you? because that's the first thing you should troubleshoot, before
adding another potential source of trouble...
2 Aug
2 Aug
12:04 p.m.
the way you describe it, you want to connect a microphone to your ada8000
and get the signal into your computer, right?
if you want to set the rme to master (which is a good idea), make sure it's
using a samplerate that the behringer can do (i.e. 44k1 or 48k).
if the wc in doesn't work (which wouldn't surprise me), try running two
adat cables between the boxes (in and out) - that way, the behringer can
sync to the adat out of the multiface.
you do get sound in and out of your multiface via the analog i/o, do you?
because that's the first thing you should troubleshoot, before adding
another potential source of trouble...
I think i have to add another potential source of trouble...
--
Giorgio Baù
*Sound engineer*
T.Rex Studio
www.trexstudio.com
2:34 p.m.
On Tue, Aug 02, 2011 at 12:04:56PM +0200, Giorgio - Audiophilo wrote:
I think i have to add another potential source of
trouble...
Some info which may be of use.
Capture assignments are fixed:
1..8 : analog inputs
9..16 : ADAT input
17,18 : SPDIF input
Playback channels go via the matrix mixer. You either have to use
hdspmixer, or a script like this one:
----------------------------------------->8------------------------------------
#!/bin/bash
# mixer inputs:
# -------------------------------
# 0-7 analog in
# 16-23 adat in
# 24-25 spdif in
# 26-33 playback 1-8
# 42-51 playback 9-18
# mixer outputs:
# -------------------------------
# 0-7 analog out
# 16-23 adat out
# 24-25 spdif out
# 26-27 headphones out
# Alsa device name
device=hw:DSP
# 32768 is 0 dB
gain=32768
function set_gain ()
{
amixer -D $device cset numid=5 $1,$2,$3 > /dev/null 2>&1
}
function reset_matrix ()
{
for out in $(seq 0 27); do
for inp in $(seq 0 51); do
set_gain $inp $out 0
done
done
}
echo Clearing matrix mixer ...
# Reset all
reset_matrix
echo Setting default connections ...
# Playback 1-8 to analog outs
set_gain 26 0 $gain
set_gain 27 1 $gain
set_gain 28 2 $gain
set_gain 29 3 $gain
set_gain 30 4 $gain
set_gain 31 5 $gain
set_gain 32 6 $gain
set_gain 33 7 $gain
# Playback 9-16 to ADAT out
set_gain 42 16 $gain
set_gain 43 17 $gain
set_gain 44 18 $gain
set_gain 45 19 $gain
set_gain 46 20 $gain
set_gain 47 21 $gain
set_gain 48 22 $gain
set_gain 49 23 $gain
# Playback 17,18 to spdif out
set_gain 50 24 $gain
set_gain 51 25 $gain
# Playback 17,18 to headphones out
set_gain 49 26 $gain
set_gain 51 27 $gain
# Set clock source
#
amixer -D$device sset 'Preferred Sync Reference' 'ADAT1'
#amixer -D$device sset 'Preferred Sync Reference' 'Word'
amixer -D$device sset 'Sample Clock Source' 'AutoSync'
#amixer -D$device sset 'Sample Clock Source' 'Internal 48.0 kHz'
echo Done.
exit 0
----------------------------------------->8------------------------------------
Ciao,
--
FA
4786
days inactive
4799
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Fons Adriaensen -
Giorgio - Audiophilo -
Jörn Nettingsmeier -
Moshe Werner -
Svend-Erik K Madsen