9 Sep
2012
9 Sep
'12
6:58 p.m.
Hi all,
I've recently installed ubuntustudio 12.04 and after trying it out, i
discovered that my M-Audio Oxygen8 v2 MIDI USB (yes it is class compliant)
keyboard is not recognised.
It was recognised out of the box on my previous setup based on ubuntu 10.04.
By not recognized, i mean that it doesn't appear in qjackctl connexions.
thus i cant route the connexions correctly...
Below are some logs !
How come it doesn't work any more ? How can i correct this ?
Thanks a lot
Cheers,
jy
####LOGS####
$cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0400000 irq 45
$aplay -l
carte 0: Intel [HDA Intel], périphérique 0: ALC888 Analog [ALC888 Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: Intel [HDA Intel], périphérique 1: ALC888 Digital [ALC888 Digital]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: Intel [HDA Intel], périphérique 3: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
$lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0
multicard reader
Bus 001 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam
[CN0314]
Bus 004 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip
Fingerprint Sensor
Bus 007 Device 002: ID 046d:c062 Logitech, Inc. LS1 Laser Mouse, corded
Bus 008 Device 004: ID 0763:0195 Midiman Oxygen 8 v2
$amidi -l
Dir Device Name
IO hw:1,0,0 USB Oxygen 8 v2 MIDI 1
9 Sep
9 Sep
7:11 p.m.
On Sun, Sep 9, 2012 at 12:57 PM, jy <jypllx(a)gmail.com> wrote:
I've recently installed ubuntustudio 12.04 and
after trying it out, i
discovered that my M-Audio Oxygen8 v2 MIDI USB (yes it is class compliant)
keyboard is not recognised.
It was recognised out of the box on my previous setup based on ubuntu 10.04.
By not recognized, i mean that it doesn't appear in qjackctl connexions.
thus i cant route the connexions correctly...
Below are some logs !
How come it doesn't work any more ? How can i correct this ?
You need to run a2jmidid -e to export ALSA MIDI hardware so jack will see it.
--
Brett W. McCoy -- http://www.brettwmccoy.com
------------------------------------------------------------------------
"In the rhythm of music a secret is hidden; If I were to divulge it,
it would overturn the world."
-- Jelaleddin Rumi
7:53 p.m.
Isn't this only usefull to transfer ALSA MIDI to Jack MIDI ?
Here my problem is that my keyboard does not appear in any of the
corresponding tabs.
2012/9/9 Brett McCoy <idragosani(a)gmail.com>
On Sun, Sep 9, 2012 at 12:57 PM, jy
<jypllx(a)gmail.com> wrote:
I've recently installed ubuntustudio 12.04
and after trying it out, i
discovered that my M-Audio Oxygen8 v2 MIDI USB (yes it is class
compliant)
keyboard is not recognised.
It was recognised out of the box on my previous setup based on ubuntu
10.04.
By not recognized, i mean that it doesn't appear in qjackctl connexions.
thus i cant route the connexions correctly...
Below are some logs !
How come it doesn't work any more ? How can i correct this ?
You need to run a2jmidid -e to export ALSA MIDI hardware so jack will see
it.
--
Brett W. McCoy -- http://www.brettwmccoy.com
------------------------------------------------------------------------
"In the rhythm of music a secret is hidden; If I were to divulge it,
it would overturn the world."
-- Jelaleddin Rumi
8:13 p.m.
On Sun, Sep 9, 2012 at 1:52 PM, jy <jypllx(a)gmail.com> wrote:
Isn't this only usefull to transfer ALSA MIDI to
Jack MIDI ?
Here my problem is that my keyboard does not appear in any of the
corresponding tabs.
It also exports hardware ports if you use -e option. I don't think
Jack will see USB MIDI ports otherwise. Did you try it?
--
Brett W. McCoy -- http://www.brettwmccoy.com
------------------------------------------------------------------------
"In the rhythm of music a secret is hidden; If I were to divulge it,
it would overturn the world."
-- Jelaleddin Rumi
7:12 p.m.
On Sun, Sep 9, 2012 at 12:57 PM, jy <jypllx(a)gmail.com> wrote:
Hi all,
I've recently installed ubuntustudio 12.04 and after trying it out, i
discovered that my M-Audio Oxygen8 v2 MIDI USB (yes it is class compliant)
keyboard is not recognised.
It was recognised out of the box on my previous setup based on ubuntu
10.04.
By not recognized, i mean that it doesn't appear in qjackctl connexions.
thus i cant route the connexions correctly...
which tab of qjackctl are you looking for it in?
8:40 p.m.
On Sunday 09 September 2012 18:57, jy wrote:
Hi all,
I've recently installed ubuntustudio 12.04 and after trying it out, i
discovered that my M-Audio Oxygen8 v2 MIDI USB (yes it is class compliant)
keyboard is not recognised.
It was recognised out of the box on my previous setup based on ubuntu
10.04.
By not recognized, i mean that it doesn't appear in qjackctl connexions.
thus i cant route the connexions correctly...
Below are some logs !
How come it doesn't work any more ? How can i correct this ?
Thanks a lot
Cheers,
jy
####LOGS####
$cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0400000 irq 45
It's not showing up in the cards list above, which seems to indicate that the
snd_usb_audio module isn't loaded, or you've forgotten to switch the keyboard
on. Have a look in lsmod to see if the module is showing there.
If not, load it with.
sudo modprobe snd_usb_audio
Then see if the keyboard shows up in the cards list.
Nigel.
4678
days inactive
4678
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Brett McCoy -
jy -
Nigel Henry -
Paul Davis