20 Jan
2011
20 Jan
'11
11:23 p.m.
Hi,
I am not able to save and reload the 'state' of yoshimi 0.58 apparently.
Let me ask first how I should save the state and how to reload it.
Thanx
\r
20 Jan
20 Jan
11:39 p.m.
On 21/01/11 09:23, rosea.grammostola wrote:
Hi,
I am not able to save and reload the 'state' of yoshimi 0.58 apparently.
Let me ask first how I should save the state and how to reload it.
You can set the location of the state file via Yoshim -> Settings.
The default in 0.058.1 is ~/.yoshimi/yoshimi.state
From main menu, Yoshimi -> Save State
To reload, yoshimi -S or yoshimi --state
yoshimi -? or yoshimi --help might assist.
cheers, Cal
11:53 p.m.
On 01/20/2011 11:39 PM, cal wrote:
On 21/01/11 09:23, rosea.grammostola wrote:
Thanks. What is the difference between saving the state and saving the
parameters?
\r
Hi,
I am not able to save and reload the 'state' of yoshimi 0.58 apparently.
Let me ask first how I should save the state and how to reload it.
You can set the location of the state file via Yoshim -> Settings.
The default in 0.058.1 is ~/.yoshimi/yoshimi.state
From main menu, Yoshimi -> Save State
To reload, yoshimi -S or yoshimi --state
yoshimi -? or yoshimi --help might assist.
21 Jan
21 Jan
12:01 a.m.
On 21/01/11 09:52, rosea.grammostola wrote:
[ ... ]
Thanks. What is the difference between saving the state and saving the
parameters?
The state save/restore lets you restore all instrument selections etc in
play at the time of the save. Parameters is just the basic settings for
yoshimi. The state save thing pre-dates jack session support, so don't get
confused on that point. 0.058.1 doesn't have jack session support, and
state save/restore doesn't handle audio/midi connections.
cheers.
10:10 a.m.
On 01/21/2011 12:01 AM, cal wrote:
The state save/restore lets you restore all instrument
selections etc in
play at the time of the save.
Afterwards it is possible to rename those states so you can re-use them
easily with the -S switch. The only issue then is that if you use
multiple parts it could happen that not all the instrument patches load
properly. I've not tested this with ZASFX so not sure if this behaviour
is limited to Yoshimi.
Now we're at it, is it possible to disable the Save session state window
or to add an option for this somewhere?
Best,
Jeremy
10:15 a.m.
On 21/01/11 20:10, Jeremy Jongepier wrote:
On 01/21/2011 12:01 AM, cal wrote:
No, but it's a good idea, that on exit dialog annoys me no end. If I ever
get past the Atomics mis-pitch drama, just a simple on/off Settings switch
should cover it.
cheers.
The state save/restore lets you restore all
instrument selections etc in
play at the time of the save.
Afterwards it is possible to rename those states so you can re-use them
easily with the -S switch. The only issue then is that if you use
multiple parts it could happen that not all the instrument patches load
properly. I've not tested this with ZASFX so not sure if this behaviour
is limited to Yoshimi.
Now we're at it, is it possible to disable the Save session state window
or to add an option for this somewhere?
10:19 a.m.
On 01/21/2011 10:15 AM, cal wrote:
No, but it's a good idea, that on exit dialog
annoys me no end.
Same here, especially when you have multiple instances open. Kind of
leaves me banging on my keyboard while shouting AAARRRGGGHH.
If I ever
get past the Atomics mis-pitch drama, just a simple
on/off Settings switch
should cover it.
That would be great!
Best,
Jeremy
7:05 p.m.
On Fri, 21 Jan 2011 10:19:52 +0100
Jeremy Jongepier <jeremy(a)autostatic.com> wrote:
On 01/21/2011 10:15 AM, cal wrote:
Would that shout be F - or a near equivalent :D
OK OK, I'm going.
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
No, but it's a good idea, that on exit dialog
annoys me no end.
Same here, especially when you have multiple instances open. Kind of
leaves me banging on my keyboard while shouting AAARRRGGGHH.
22 Jan
22 Jan
5:43 a.m.
On 22/01/11 05:05, Folderol wrote:
On Fri, 21 Jan 2011 10:19:52 +0100
Jeremy Jongepier<jeremy(a)autostatic.com> wrote:
So's the exit dialog. Save state is on the menu, so no need to bother
with that on exit. Unless there's a change to the config settings
(generally a rare event), there's no need at all to be bothersome on
the way out.
cheers.
On 01/21/2011 10:15 AM, cal wrote:
Would that shout be F - or a near equivalent :D
OK OK, I'm going.
No, but it's a good idea, that on exit dialog
annoys me no end.
Same here, especially when you have multiple instances open. Kind of
leaves me banging on my keyboard while shouting AAARRRGGGHH.
8:33 a.m.
On 01/22/2011 05:43 AM, cal wrote:
On 22/01/11 05:05, Folderol wrote:
Unless you modified a patch to your likings during hours and hours of
fiddling and tweaking and then mindlessly close Yoshimi.
In a reflex you click 'Discard' because that's what you always do.
AAAARRGGGHHHHH in F!!!!
Best,
Jeremy
On Fri, 21 Jan 2011 10:19:52 +0100
Jeremy Jongepier<jeremy(a)autostatic.com> wrote:
So's the exit dialog. Save state is on the menu, so no need to bother
with that on exit. Unless there's a change to the config settings
(generally a rare event), there's no need at all to be bothersome on
the way out.
cheers. On 01/21/2011 10:15 AM, cal wrote:
Would that shout be F - or a near equivalent :D
OK OK, I'm going.
No, but it's a good idea, that on exit dialog
annoys me no end.
Same here, especially when you have multiple instances open. Kind of
leaves me banging on my keyboard while shouting AAARRRGGGHH. 
21 Jan
21 Jan
7:26 a.m.
cal wrote:
On 21/01/11 09:23, rosea.grammostola wrote:
Hmm, tried that in 0.058.0 and no appearance of ~/.yoshimi or anything.
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
Hi,
I am not able to save and reload the 'state' of yoshimi 0.58 apparently.
Let me ask first how I should save the state and how to reload it.
You can set the location of the state file via Yoshim -> Settings.
The default in 0.058.1 is ~/.yoshimi/yoshimi.state
From main menu, Yoshimi -> Save State
To reload, yoshimi -S or yoshimi --state
yoshimi -? or yoshimi --help might assist.
7:35 a.m.
On 21/01/11 17:26, david wrote:
cal wrote:
Not sure what you mean by "no appearance of ~/.yoshimi or anything".
On 21/01/11 09:23, rosea.grammostola wrote:
Hmm, tried that in 0.058.0 and no appearance of ~/.yoshimi or anything. Hi,
I am not able to save and reload the 'state' of yoshimi 0.58 apparently.
Let me ask first how I should save the state and how to reload it.
You can set the location of the state file via Yoshim -> Settings.
The default in 0.058.1 is ~/.yoshimi/yoshimi.state
From main menu, Yoshimi -> Save State
To reload, yoshimi -S or yoshimi --state
yoshimi -? or yoshimi --help might assist.
7:51 a.m.
cal wrote:
On 21/01/11 17:26, david wrote:
Sorry. I picked an instrument and a system effect, then used the File >
Save State option. Then I closed Yoshimi and clicked Discard on the
option to Save or Discard state. Then I looked in my home folder (with
view hidden files on) and found no .yoshimi folder whatever.
Then I tried starting yoshimi with the "-S" option, and it strategically
retreated.
Then I started it again, picked instrument and effect. Closed Yoshimi
and had it save state - and there was the .yoshimi folder!
So I tried starting Yoshimi from command line with the -S parameter, and
it strategically retreats. Because now there's no
~/.yoshimi/yoshimi.state or even a folder to contain it.
Do newer versions of Yoshimi handle this better, such as provide a menu
option of loading settings?
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
cal wrote:
Not sure what you mean by "no appearance of ~/.yoshimi or anything". On 21/01/11 09:23, rosea.grammostola wrote:
Hmm, tried that in 0.058.0 and no appearance of ~/.yoshimi or anything. Hi,
I am not able to save and reload the 'state' of yoshimi 0.58
apparently.
Let me ask first how I should save the state and how to reload it.
You can set the location of the state file via Yoshim -> Settings.
The default in 0.058.1 is ~/.yoshimi/yoshimi.state
From main menu, Yoshimi -> Save State
To reload, yoshimi -S or yoshimi --state
yoshimi -? or yoshimi --help might assist.
12:34 p.m.
Sorry to be slow, but ...
On 21/01/11 17:51, david wrote:
[ ... ]
Do newer versions of Yoshimi handle this better, [ ... ]
To be honest I really don't know, I haven't bothered with the
simple state save for ages. It really is so old school compared
to jack session.
[handle this better], such as provide a menu option of
loading settings?
Ummm, no.
cheers.
5059
days inactive
5061
days old
linux-audio-user@lists.linuxaudio.org
13 comments
5 participants
participants (5)
-
cal -
david -
Folderol -
Jeremy Jongepier -
rosea.grammostola