1 Jul
2011
1 Jul
'11
5:13 p.m.
I added a second M-Audio Delta 1010 (rackmount version) to my recording
system and was successful by following the instructions at
http://www.jrigg.co.uk/linuxaudio/ice1712multi.html
My issue is that I can't seem to pass jackd the correct parameters unless I
start it from the command line like:
jackd -d alsa -C multi_capture -P multi_playback
How can I get either qjackctl or ideally have Ardour get jack to start with
these settings? I tried all the combos I could imagine.
Thanks,
Ben
1 Jul
1 Jul
5:21 p.m.
On Fri, Jul 1, 2011 at 11:13 AM, Ben Tartsa <btartsa(a)gmail.com> wrote:
I added a second M-Audio Delta 1010 (rackmount
version) to my recording
system and was successful by following the instructions at
http://www.jrigg.co.uk/linuxaudio/ice1712multi.html
My issue is that I can't seem to pass jackd the correct parameters unless I
start it from the command line like:
jackd -d alsa -C multi_capture -P multi_playback
How can I get either qjackctl or ideally have Ardour get jack to start with
these settings? I tried all the combos I could imagine.
as on IRC, you need to start by telling us what actually goes wrong ..
5:23 p.m.
On Friday 01 July 2011 11:13:54 Ben Tartsa wrote:
I added a second M-Audio Delta 1010 (rackmount
version) to my recording
system and was successful by following the instructions at
http://www.jrigg.co.uk/linuxaudio/ice1712multi.html
My issue is that I can't seem to pass jackd the correct parameters unless
I start it from the command line like:
jackd -d alsa -C multi_capture -P multi_playback
I have a 1010 myself and have never noticed any problems. What are you seeing
if you don't use the command line?
How can I get either qjackctl or ideally have Ardour get jack to start with
these settings? I tried all the combos I could imagine.
Thanks,
Ben
all the best,
drew
5:30 p.m.
On Fri, 1 Jul 2011 08:13:54 -0700
Ben Tartsa <btartsa(a)gmail.com> wrote:
How can I get either qjackctl or ideally have Ardour
get jack to start with
these settings? I tried all the combos I could imagine.
Ben, I have a page at http://delta.brainiac.com/deltasync.html that
may provide some more info. One thing to keep in mind is that the
multi_capture and multi_playback devices will not automatically
appear in qjackctl's pull-down menus for the input and output devices.
You'll have to enter that manually the first time, then they'll be
available in the pull-downs after that.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa
4947
days inactive
4947
days old
linux-audio-user@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Ben Tartsa -
drew Roberts -
Joe Hartley -
Paul Davis