9 Mar
2014
9 Mar
'14
10:54 a.m.
Hi
I'm playing with non. In ardour I use the SC4 mono compressor alot,
partly because I like the visual feedback of the two meters "amplitude"
and "gain reduction", which is really helpful when finding that sweet
spot where the compressor starts to kick in. However those meters are
missing in Is there a way to get these meters in non? Is there another
compressor that works with non with this kind of visual feedback?
--
Atte
http://atte.dk http://modlys.dk
10 Mar
10 Mar
9:34 a.m.
On 03/09/2014 10:54 AM, Atte wrote:
Hi
I'm playing with non. In ardour I use the SC4 mono compressor alot,
partly because I like the visual feedback of the two meters "amplitude"
and "gain reduction", which is really helpful when finding that sweet
spot where the compressor starts to kick in. However those meters are
missing in Is there a way to get these meters in non? Is there another
compressor that works with non with this kind of visual feedback?
Hello Atte,
Non Mixer only supports LADSPA so there is no way to get the meters into
Non because those are part of the LV2 port of SC4.
Bye,
Jeremy
9:52 a.m.
[Jeremy Jongepier]
Non Mixer only supports LADSPA so there is no way to
get the meters into
Non because those are part of the LV2 port of SC4.
$ analyseplugin /usr/lib/ladspa/sc4_1882.so|grep output|grep control
"Amplitude (dB)" output, control, -40 to 12
"Gain reduction (dB)" output, control, -24 to 0
As you can see, those outputs are available on the LADSPA version as
well. It would appear the host in question doesn't provide means of
presenting these ports to the user.
Cheers, Tim
10:08 a.m.
On 03/10/2014 09:52 AM, Tim Goetze wrote:
[Jeremy Jongepier]
Thanks Tim for clearing that up. I wasn't aware that LADSPA exposed
ports this way and that they could be used to visualize the output
values. Another thing learned :)
Bye,
Jeremy
Non Mixer only supports LADSPA so there is no way
to get the meters into
Non because those are part of the LV2 port of SC4.
$ analyseplugin /usr/lib/ladspa/sc4_1882.so|grep output|grep control
"Amplitude (dB)" output, control, -40 to 12
"Gain reduction (dB)" output, control, -24 to 0
As you can see, those outputs are available on the LADSPA version as
well. It would appear the host in question doesn't provide means of
presenting these ports to the user.
Cheers, Tim
11:41 a.m.
Am 10.03.2014 10:08, schrieb Jeremy Jongepier:
On 03/10/2014 09:52 AM, Tim Goetze wrote:
Check out guitarix for example, :-D
it presenting LADSPA output control ports as type "Display" to the user.
the above named ports be there.
greets
hermann
[Jeremy Jongepier]
Thanks Tim for clearing that up. I wasn't aware that LADSPA exposed
ports this way and that they could be used to visualize the output
values. Another thing learned :)
Bye,
Jeremy
Non Mixer only supports LADSPA so there is no way
to get the meters into
Non because those are part of the LV2 port of SC4.
$ analyseplugin
/usr/lib/ladspa/sc4_1882.so|grep output|grep control
"Amplitude (dB)" output, control, -40 to 12
"Gain reduction (dB)" output, control, -24 to 0
As you can see, those outputs are available on the LADSPA version as
well. It would appear the host in question doesn't provide means of
presenting these ports to the user.
Cheers, Tim
3913
days inactive
3914
days old
linux-audio-user@lists.linuxaudio.org
4 comments
4 participants
participants (4)
-
Atte -
hermann meyer -
Jeremy Jongepier -
Tim Goetze