Linux-audio-user April 2003

linux-audio-user@lists.linuxaudio.org

129 participants
150 discussions

[linux-audio-user] Setting equalizer settings with Sox ?

by Roel de Wit

Hi, I've been playing with Sox for a while but I can't seem to find how to do a specific thing. Could somebody please tell me if what I want is possible and if so, how to do it. One of the things I want to do is to boost a range of frequencies. Basically from 20 Hertz to 320 Hertz, where 80 Hertz is considered the 'center' and the boost gets less when going to 20/320 Hertz. I have found the highp(ass)/lowp(ass) options but these don't seem to be of use for this. I'd really appreciate some help here. I need this to be done by a command-line tool available under Linux and if possible under Windows (even if I would have to compile it myself).. Grtzzzzzzz Roel...

21 years, 8 months

[linux-audio-user] Re: More Midisport 2x2 troubles (help from the Alsa developers is greatly appreciated!)

by Ivica Bukvic

Hmm, I've tried running the alsa-lib/test/ramidi test and tried using it as: rawmidi -i hw:2,0 This starts it up but I don't get any events in. Can anyone tell me why? Any other setting (i.e. hw:2,1) reports an error that such a device was not found. Interesting thing is that when I do ./rawmidi -o hw:2,0 I get the note-on/off signal on the midisport, which means that the send part of it works ok. However, when I do -i nothing comes into the cpu. Same is with the ./rawmidi -I /dev/midi2 (there are no errors, but no input either). cat /dev/midi2 works just fine. My /dev/snd/ only has 1 midi device (midiC2D0), so it does seem like it's a problem with Alsa. Running latency in the same dir freezes the machine with a loud sound going on. I am using MDK 9.1 on Inspiron 8200. Any help is greatly appreciated! Any other suggestions? Ico > -----Original Message----- > From: aezr4(a)studcom.urz.uni-halle.de [mailto:aezr4@studcom.urz.uni- > halle.de] On Behalf Of Clemens Ladisch > Sent: Thursday, April 03, 2003 9:50 AM > To: Ivica Bukvic > Cc: alsa-devel(a)lists.sourceforge.net > Subject: Re: [Alsa-devel] Re: More Midisport 2x2 troubles > > Ivica Bukvic wrote: > > However, I am a bit confused, since this feature with /dev/midi stuff > > worked like a charm just a couple weeks ago (ver. 0.9.1). So, did > > something change dramatically since? > > No. The USB MIDI driver has behaved in this way since 0.9.0rc4. > > > Can you also point me in the right direction where I can see a simple > > ALSA code to accessing the both of the MIDI raw ports? > > alsa-lib/test/rawmidi.c does some operations with both OSS and ALSA ports. > When using two ports, you'd call snd_rawmidi_open() twice and then have > two handles, similar to two file handles. > alsa-lib/test/control.c enumerates rawmidi devices. > > BTW: Are you soure you want to use rawmidi ports? Many software > synthesizers create sequencer ports only. > > > P.S. One thing I just realized is that there is something rather unclear > > to me in the explanation generously provided by Clemens: > > > > > /dev/midi0 -> card 0, device 0, subdevice 0 > > > /dev/amidi0 -> card 0, device 1, subdevice 0 > > > /dev/midi1 -> card 1, device 0, subdevice 0 > > > /dev/amidi1 -> card 1, device 1, subdevice 0 > > > /dev/midi2 -> card 2, device 0, subdevice 0 > > > /dev/amidi2 -> card 2, device 1, subdevice 0 > > > > since none of the amidi devices does not work on my setup (see my last > > e-mail for more info) and it seems as if it should. > > Your two ports are subdevices 0 and 1 of card 1, device 0. > /dev/amidi1 points to device 1 which doesn't exist. > > > Furthermore, what happens when the midi interface has more than 2 I/O > > ports? > > If the ports are subdevices of one device, only the first can be accessed > with the OSS /dev/midiX file. > If each port is a seperate device, the first two ports can be accessed > with /dev/midiX and /dev/amidiX. > > Drivers for multiport interfaces usually use the first alternative (one > device with subdevices) because there is a limit of 8 rawmidi devices per > card. > > > HTH > Clemens >

21 years, 8 months

[linux-audio-user] How to get Jack to fork as daemon

by Nick

Hi, What command do I need to use on MDK 9.1 to get Jack to fork into the background as a daemon? I'd like to make a RC script and have it start, but I don't know how to hack those scripts or what the command is to make a program go into the background as a process. Thanks -- Nick <nicktsocanos(a)charter.net>

21 years, 8 months

[linux-audio-user] Create music as WAV file?

by Mikhail Ramendik

Hello, If I want to create music using MIDI (and a soft synth), but for saving to disk (as WAV, to burn a CD later) and not immediate output, how do I do this? Is this possible with rosegarden4+iiwusynth/fluidsynth? -- Best regards, Mikhail mailto:mr@ramendik.ru

21 years, 8 months

[linux-audio-user] MDK sound-RPMs troubles / Sound in Slackware?

by Moeflon

I think I'm ready to move away from MDK... Been messing around the last couple of days with MDK 9.1(rc3) Or I did something wrong, or urpmi has some probs, anyhow, more than 3/4 of the sound rpms I tried to install from the 9.1 plf sources seem to be corrupted (as I may believe what urpmi tells me) => Does anybody knows this comes? Is it normal? I 'm getting headaches from the rpm-system. I'd like to move over to Slackware. => Does anybody have any idea how difficult/easy it is to build a sound-workstation on slack? any links? Been working on linux for a bit over a year now. Really nice OS. Wonderful to see how things are getting better all the time!! Karel (alias Moeflon)

21 years, 8 months

[linux-audio-user] More Midisport 2x2 troubles

by Ivica Bukvic

Hi all, I just upgraded to Mdk 9.1 and reinstalled all of the MIDI-related stuff, as well as the Alsa 0.9.2 (from sources, after uninstalling Mdk's RPM's). I also installed Fernando's modified alsasound script that enables smart unloading of snd- modules. The end result is that the midisport works, well sort of. The firmware loads fine, and the midisport is properly recognized. The problem is that I only have one MIDI port available even though this is the 2x2 version (I had 2 ports in Mdk 9.0, usually /dev/midi(0) and /dev/midi1). Now I only have /dev/midi. The interesting thing is that the /proc/asound/card1/midi0 lists the following: Output 0 Tx bytes : 0 Output 1 Tx bytes : 0 Input 0 Rx bytes : 5 (this number changes, most likely because it's the only port that has anything hooked up to it) Input 1 Rx bytes : 0 So, it seems that there are 2 I and 2 O ports, but they are all allocated within the midi0 device according to the proc stuff (or /dev/midi1 according to the dev stuff). If this is the case, then how do I access the second port. Cat /dev/midi1 only outputs stuff coming into the first port, so that tells me something's fishy. I am using CCRMA's hotplug 8_26_1 and ezusbmidi 2002_11_17. There were no alterations to the kernel or any other part of the system (apart from the alsa install and other audio software installs). My modules.conf looks like this: # ALSA portion alias char-major-116 snd alias char-major-14 soundcore alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-card-0 alias snd-card-1 snd-hdsp alias sound-slot-1 snd-card-1 alias snd-card-2 snd-usb-audio alias sound-slot-2 snd-card-2 options snd major=116 cards_limit=4 device_mode=0666 device_gid=0 device_uid=0 options snd-intel8x0 index=0 options snd-hdsp index=1 options snd-usb-audio vid=0x763 pid=0x1001 index=2 # CS4205 alias sound-service-0-0 snd-mixer-oss #alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss #alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss #HDSP alias sound-service-1-0 snd-mixer-oss alias sound-service-1-1 snd-seq-oss alias sound-service-1-3 snd-pcm-oss alias sound-service-1-8 snd-seq-oss alias sound-service-1-12 snd-pcm-oss #MIDISPORT alias sound-service-2-1 snd-seq-oss alias sound-service-2-8 snd-seq-oss In this situation the hdsp is not in use, so midisport assumes the 2nd card position. Upon midisport reconnect, the /var/log/messages spits out the following: Apr 2 23:59:49 badass-bukvic kernel: usb.c: USB disconnect on device 00:1d.2-1 address 29 Apr 3 00:00:00 badass-bukvic kernel: hub.c: new USB device 00:1d.2-1, assigned address 30 Apr 3 00:00:00 badass-bukvic kernel: usb.c: USB device 30 (vend/prod 0x763/0x1001) is not claimed by any active driver. Apr 3 00:00:03 badass-bukvic /etc/hotplug/usb.agent: Setup ezusbmidi for USB product 763/1001/1 Apr 3 00:00:03 badass-bukvic /etc/hotplug/usb.agent: Module setup ezusbmidi for USB product 763/1001/1 Apr 3 00:00:03 badass-bukvic /etc/hotplug/usb/ezusbmidi: load /usr/share/usb/ezusbmidi/ezusbmidi2x2.ihx for 763/1001/1 to /proc/bus/usb/002/030 Apr 3 00:00:03 badass-bukvic kernel: usb.c: USB disconnect on device 00:1d.2-1 address 30 Apr 3 00:00:03 badass-bukvic kernel: hub.c: new USB device 00:1d.2-1, assigned address 31 Apr 3 00:00:07 badass-bukvic /etc/hotplug/usb.agent: Setup snd-usb-audio audio usb-midi for USB product 763/1110/1 Apr 3 00:00:07 badass-bukvic /etc/hotplug/usb.agent: ... blacklisted module: audio Apr 3 00:00:07 badass-bukvic /etc/hotplug/usb.agent: ... blacklisted module: usb-midi Apr 3 00:00:07 badass-bukvic /etc/hotplug/usb.agent: Setup alsasound for USB product 763/1110/1 Apr 3 00:01:00 badass-bukvic modprobe: modprobe: Can't locate module sound-service-2-2 (NB: what's up with the sound-service-2-2, is there such a thing?) Upon doing this, cat /dev/midi1 is the only one that works. Other pertinent info is (in abbreviated form): /proc/asound/version -> ALSA=0.92 kernel=2.4.21-0.13mdk ../cards -> 0 i810, 1 2x2 (Midisport) at usb-00:1d.2-1 ../card1/ has id and midi0 files only All I also remember the last time when I was using 0.9.0 is that I had to upgrade from CVS in order to get both ports (it was the snd-usb-audio bug IIRC). But now, I did d/l and install 0.9.2 which should have those fixes but I can't seem to get the second port to work. Could it be that there's something leftover from the mdk 0.9.0 version of Alsa even after I did rpm -e and reinstalled 0.9.2 from sources? Any help on this issue is greatly appreciated! Sincerely, Ivica Ico Bukvic, multimedia sculptor http://meowing.ccm.uc.edu/~ico

21 years, 8 months

[linux-audio-user] RME HDSP 96/52

by Joshua N Pritikin

i got my new sound card today. It tests fine in Windows XP. Now i want to get it working in Linux. (i've heard rumors that the alsa driver hasn't been updated for the latest firmware.) i'm running kernel 2.5.66 (alsa 0.9.2). My card is marked "Dec 2002 Rev 1.3". snd_hammerfall_mem allocates memory for 1 card. The hdsp driver seems to load without errors, but the card doesn't appear under /proc/asound/. If there is a patch available then point me to it and i'll test it. Thanks ... -- Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org

21 years, 8 months

[linux-audio-user] Tape Op Magazine

by Mark Knecht

Hi, Every time I get this wonderful magazine in the mail it's like Christmas all over again. I think this is the best magazine I read on recording, bar none, and believe it or not, it's free! For those of you that love this stuff like I do, go check out http://www.tapeop.com and sign up for a free subscription. I don't know if they mail over seas, but I hope so. If not, find out where you can buy a copy. It's well worth it. Nearly 100 pages of articles written by engineers and musicians. Reviews done by people really using the equipment. The letters section is often surprising, like a recent letter to the magazine from Pete Townshend. Great stuff. Mark

21 years, 8 months

[linux-audio-user] Recording quicktime audio?

by James Hughes

Greetings, Can anyone give me an idea how to record the audio from a quicktime movie? I've had success recording mp3 streams using grecord or xsox, and thought I could do the same with qt, but no go. I'm using the crossover plugin to play the movie in the browser. Thanks, James -- James Hughes jhughes(a)kos.net http://jpathu.net/

21 years, 8 months

[linux-audio-user] RTMix & MIDI

by Michal Seta

Hello, I just started playing around with RTMix. But I can't figure out the real-time MIDI stuff in RTMix. I've set it up to read from the correct MIDI port. The MIDI is working and MIDI logging enables me to see incoming MIDI. However, MIDI events seem not to trigger any action. I'm probably missing some basic understanding... this line: text([>say]={"MIDI received"} [>at]={"rt[0]"} [>kill]={"none"} [>accel]={"midi: 128, 255, 0, 127, -1, 127"});; doesn't print 'MIDI received' no matter what I do. With MIDI logging on I can see all sorts of midi messages flying by. The same thing using [>accel]={"a"}, for instance, works as expected. Also, I was under the impression that if I filter MIDI events the log will only display the events that get through. However, the line below results in the exact same log as the log above. text([>say]={"MIDI received"} [>at]={"rt[0]"} [>kill]={"none"} [>accel]={"midi: 144, 144, 0, 127, -1, 127"});; I'm lost. ./MiS -- _ __ __ (_)___ Michal Seta / \/ \ _/^ _| / V |_ \ @creazone.32k.org (___/V\___|_|___/ http://www.[creazone]|[noonereceiving].32k.org

21 years, 8 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user April 2003