Linux-audio-user January 2004

linux-audio-user@lists.linuxaudio.org

148 participants
168 discussions

[linux-audio-user] Supporting Linux made music?

by Juhana Sadeharju

>From: Mark Constable <markc(a)renta.net> > >Where can I buy your music online, to help support music that >is produced with linux based software, wether I like your music >or not ? Many software would need presets, example sounds and loops, try-out demos. We need to support people who makes the software better. I don't see a point of giving money to people who only makes music. Regards, Juhana

21 years, 2 months

[linux-audio-user] audacity 1.2pre3 and jack

by krozilo＠nm.ru

hi! i compiled audacity with ./configure --with-portaudio=v19 --without-portmixer and try to use with jack when i press "play" button, then auda not play audio. after EVERY pressing "play" button a pair: PortAudio client:out_0 PortAudio client:out_1 are added to jack_lsp list. f.e., after 4 pressing jack_lsp out: sh-2.05b$ jack_lsp alsa_pcm:capture_1 alsa_pcm:capture_2 alsa_pcm:playback_1 alsa_pcm:playback_2 PortAudio client:out_0 PortAudio client:out_1 PortAudio client:out_0 PortAudio client:out_1 PortAudio client:out_0 PortAudio client:out_1 PortAudio client:out_0 PortAudio client:out_1 sh-2.05b$ if i try to connect ports sh-2.05b$ jack_connect PortAudio client:out_0 alsa_pcm:playback_1 then audacity crash. Who success with pair audacity-jack? sorry for mistakes, regards.

21 years, 2 months

[linux-audio-user] MalaWhaLa licence?

by Daniel James

Hello, Tom Schouten's music was recommended to me for DJ'ing from a laptop at an event we are doing in London, a 'GNU/Linux Audio Centre' at the Sounds Expo 2004 trade show. Although your website says the music is free to download, it doesn't say anything about live performance licensing, so I thought I'd check with you if this was OK. If you could let me know what the licence conditions are for DJ'ing - if any - I'd appreciate it. Cheers Daniel

21 years, 2 months

[linux-audio-user] re: audacity

by BrbrOfSvl＠aol.com

->I think audacity uses the OSS emulation layer of ALSA, maybe there is a new "feature" (bug?) in the newest ALSA that breaks emulation for the HDSP? What sort of message do you get on startup? -- Fernando<- That's just it - there is no startup. It just hangs there with no message or any activity at all - until you interrupt the process or kill it in another shell. I'm going to try downgrading to the "latest stable release" (which is earlier than the 1.1-3 version on planetccrma) when the audacity site is back up - where did the ccrma audacity come from? Thanks, Matt

21 years, 2 months

[linux-audio-user] audacity

by BrbrOfSvl＠aol.com

So, I'm running an HDSP/Multiface and a CCRMA redhat system. I can't get audacity to even start. It has worked just fine with past incarnations of the planetccrma kernel/drivers and this card/system. It works fine now with the onboard soundcard. What gives? Matt

21 years, 2 months

[linux-audio-user] linux 2.6.1 realtime lsm, jackstart & ecasound success

by Eric Dantan Rzewnicki

I just completed a successful run of ecasound with my guitar_mix.ecs (attached) on my new box. This is a 15 minutes 5 track session, 4 tracks from disk, one live jack input. Three outputs: stereo wav, mono wav and live monitor. It uses amplify and panning effects controlled by ecasound generic oscillators. Details on the new box and it's current configuration: asus a7v8x-x athlon XP 2800+ (2071.203 MHz) 1.5GB PC2700 RAM 12GB / /dev/hda2 (actually a 40G disk) 160GB /mnt/audio/ /dev/hdc1 drives tuned 2GB swap /dev/hda1 onboard via8235 (M-Audio Delta-66 w/omni i/o -- still in old box) (ymfpci guillemot maxisound fortissimo -- midi only -- still in old box) debian testing (sarge) 2.6.1 (pre-empt on -- kernel.org sources compiled via make-kpkg) realtime-0.0.2 lsm alsa-1.0.2 (drivers, lib, envy24control, tools) drivers: ./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \ --with-cards=dummy,virmidi,ice1712,ymfpci,via82xx libsndfile-1.0.5 from tar.gz. debian only had 1.0.4 jack-0.94.0 ./configure --enable-capabilities --enable-optimize \ --with-default-tmpdir=/mnt/ramfs/ --disable-portaudio ecasound-2.3.2 ./configure --enable-pyecasound --disable-oss --disable-arts \ --with-largefile I started jackd via jackstart like so: jackstart -v -R -d alsa -d via82xx -r 44100 -p 128 -n 3 I run the ecasound session from a script that does some pre and post processing. It assembles the 4 wav input files from other wav's and cuts the output files down to randomly selected 5 minute chunks, fades in and out the beginnings and ends, normalizes and encodes the stereo wav to ogg. The whole session ran on this onboard soundcard without xruns. I switched desktops numerous times in openbox3 and even switched out of X to tty2 to login and change my hostname back (I had changed it while in X and new apps weren't able to start because they couldn't connect to the display. duh ... 8) ). The session ran flawlessly. I'm not exactly sure what the stats jackd puts out when run verbosely mean, but I know the results I saw mean I'll be able to run this session with many more effects at lower latency than I could on my old box ... _And_ I don't have to do it as root! yay! :) The old box is a PII 400 w/768M PC100 RAM. On that box the whole session including pre and post processing takes around 21 minutes. On the new box that overhead is cut way down with the whole session taking only 16 minutes 20 seconds (only 1 min, 20 more than the actual recording time). While running jackd reports load averaging (just measured visually from jackd output, not hard numbers) around 7.5 with max usecs ~220. On the old box using my delta66 I have to run at -p 256 to avoid xruns in this session, load averages around 22 and max usecs around 1350. Admittedly, much of this performance gain is related to the new hardware. But, still , it's very cool that all this newish stuff (lsm, latest alsa, latest ecasound, latest jackd, 2.6 kernel) is working well In other testing with the via chip I've had jack running as low as -p 32 -n 3 with just a couple jack_metro's connected. I have to go down to -p 16 to get a few xruns. Not until -p 8 do things start to get really bad. /proc/interrupts says the card's on IRQ 4, too. I have a few more things to install, configure and test before I move my delta66 and midi setup over to the new box. But, these initial tests are very exciting. I just had to share. Thank you to all the developers for all this excellent software. And thanks to all the list members, too. :) -Eric Rz. # eric(a)zhevny.com guitar_mix chainsetup file ### general -b:128 -B:rtlowlatency -n:guitar_mix -X -t:902.802 ### audio inputs -a:1,6,11 -i:track1.wav -a:2,7,12 -i:track2.wav -a:3,8,13 -i:track3.wav -a:4,9,14 -i:track4.wav -a:5,10,15 -i:jack_alsa #-a:5,10,15 -f:16,1,44100 -i alsahw,0 ### audio outputs # live output -a:1,2,3,4,5 -f:16,2,44100 -o jack_alsa #-a:1,2,3,4,5 -f:16,2,44100 -o alsahw,0,0 # file outputs ### FIXME: change this output to .ogg when crop and fades work -a:6,7,8,9,10 -f:16,2,44100 -o:/mnt/audio/in_progress/guitar_mix/stereo_out.wav -a:11,12,13,14,15 -f:16,1,44100 -o:/mnt/audio/in_progress/guitar_mix/mono_out.wav ### chain operators and controllers # live output -a:1 -erc:1,2 -epp:0 -kos:1,0,100,0.02,0 -ea:0 -kos:1,0,200,0.01,0 -a:2 -erc:1,2 -epp:0 -kos:1,0,100,0.04,0 -ea:0 -kos:1,0,200,0.02,0 -a:3 -erc:1,2 -epp:0 -kos:1,0,100,0.06,0 -ea:0 -kos:1,0,200,0.03,0 -a:4 -erc:1,2 -epp:0 -kos:1,0,100,0.08,0 -ea:0 -kos:1,0,200,0.04,0 -a:5 -erc:1,2 -epp:50 -ea:205 # stereo file out for .ogg -a:6 -erc:1,2 -epp:0 -kos:1,0,100,0.02,0 -ea:0 -kos:1,0,200,0.01,0 -a:7 -erc:1,2 -epp:0 -kos:1,0,100,0.04,0 -ea:0 -kos:1,0,200,0.02,0 -a:8 -erc:1,2 -epp:0 -kos:1,0,100,0.06,0 -ea:0 -kos:1,0,200,0.03,0 -a:9 -erc:1,2 -epp:0 -kos:1,0,100,0.08,0 -ea:0 -kos:1,0,200,0.04,0 -a:10 -erc:1,2 -epp:50 -ea:205 ### crop and fade in/out ### generate an effects preset file for this in preprocessing #-a:6,7,8,9,10 -ea:0 -kl:1,0,100,4,0,0,10,1,290,1,300,0 # mono file out for pool -a:11 -ea:0 -kos:1,0,200,0.01,0 -a:12 -ea:0 -kos:1,0,200,0.02,0 -a:13 -ea:0 -kos:1,0,200,0.03,0 -a:14 -ea:0 -kos:1,0,200,0.04,0 -a:15 -ea:205 ### crop and fade in/out ### generate an effects preset file for this in preprocessing #-a:11,12,13,14,15 -gc:$pos,300 -ea:100 -klg:0,0,100,4,0,0,10,1,290,1,300,0

21 years, 2 months

[linux-audio-user] [ot] Is DJ-ing commercial use of music tracks?

by Frank Barknecht

Hallo, I'm considering starting to DJ again, but this time not with vinyl as I used to, but with a Linux laptop playing netaudio. Now as more-and-more net labels start to use a Creative Commons license that prohibits commercial use as described here: http://creativecommons.org/licenses/by-nd-nc/1.0/legalcode I wonder, if playing tracks licensed as this in a club/pub where I will be payed (badly) for my DJ-ing is commercial use? I fear, it is, and that thus my netaudio DJ-ing is doomed unless I break the license hoping noone will see it. And a related question: If I would do a radio feature on net audio, which I would be payed for writing introductory texts and recording this speech, would this be commercial use, even if this would run on a public radio without any kind of advertising or money making on the station's side? Of course I would follow other license requirements like attribution and such. ciao -- Frank Barknecht _ ______footils.org__

21 years, 2 months

[linux-audio-user] linux and alsaplayer

by jaap

Hello list, I'm running gentoo kernel 2.20-gentoo-r8. I start jack (0.91.1) with jackd -vR -d alsa ,as root. muse is working (if started as root) so is ardour But when I try Alsaplayer -o jack somefile.someformat, it says "Failed to load output plugin "jack". Trying defaults." When I shut down jack alsaplayer starts playing perfectly Does it have something to do with the asoundrc-science? I tried copiing the jack-plugin text for .asoundrc somewhere from the alsa-site, the same result I thought it should work without the .asoundrc,but maybe I'm wrong. Anyone knows what I'm missing? Thanks in advance, Jaap van Geffen

21 years, 2 months

[linux-audio-user] Multiple Simultaneous Inputs

by Simon White

Hello, I was wondering if it's possible to get a sound card(s) to work with linux to record multiple audio inputs at the same time and track them. I was looking at the Midiman 1010LT as I would want to process more than four inputs at once, but I can't find out if you can use all of it's inputs at the same time, or if there's any software that would even allow such mad creations to be born. Any suggestions as to where to go or what to use would be very helpful indeed. Thanks, Simon

21 years, 2 months

[linux-audio-user] ANNOUNCE: Gnomoradio 0.9

by Jim Garrison

Gnomoradio is a peer-to-peer music playing system that can read and understand Creative Commons licenses. In addition to playing local files, it has the ability to recommend, download, and play free music (mp3s and oggs) in a user-friendly way. There are many large and subtle bugfixes in this release, and the user interface is improved. An upgrade is highly recommended for all current users. Website: http://gnomoradio.org/ Tarball: http://gnomoradio.org/pub/devel/gnomoradio-0.9.tar.gz Jim Garrison List of changes in 0.9 - Now compatible with libxml++ 1.0 API - Improvements to determining an ogg's title - You can no longer start a second download of a resource while it is checking the checksum - Other HubClient fixes - More functionality added to right-click menu - OGG playing fixes - radio playlist is now saved in configuration - saves all configuration every 10 minutes in case of crash (and alarm now works finally) - no longer needs esd running for mp3's to play (as long as the sample rate is standard) - lots of fixes involving disabling Rainbow - cancel now works in song path directory selector - added IntroDruid - many changes in HttpServer - changed the way downloads are signaled internally through SongList's - fixed lots of packing issues - added PlaylistDruid (Matt) - added timer (Matt) - fixed way state/next song is signaled to UI

21 years, 2 months

← Newer
1
2
3
4
5
6
7
...
17
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user January 2004