Linux-audio-user November 2004

linux-audio-user@lists.linuxaudio.org

188 participants
181 discussions

Re: [linux-audio-user] USB 1.1 soundcard

by Spencer Russell

I've got a Tascam US428, with 4x2 audio in/out 2x2 Midi in/out and it's a DAW control surface. All in all, a pretty sweet unit. But I can't get it to work. It works fine until I start jack, at which point my computer hangs. (sometimes a few minutes after I start jack) If I run xmms with the alsa plugin, it works for a little bit, then the audio stops working, but at least it doesn't hang my system. A lot of people seem to have it working pretty smoothly, though, so I might be sort of an isolated case. If anyone has any ideas, I'd appreciate the help. Thanks, on an unrelated note, does anyone have mutt configured to reply to this list an a sane and easy manner? spencer On Sun, Nov 14, 2004 at 04:45:44PM -0500, linux-audio-user-request(a)music.columbia.edu wrote: > > Just a question: Is the Tascam US122 USB1.x? If yes, I will buy it for > christmas. > What makes this device cool: > - If it is USB1.x I can use it with my laptop. > - It has 2 Mic-Ins with XLR and Phantompower all feed from the USB-bus, no > extra powersupply. > - It has some nice other features and is "only" 222EUR at thomann...

20 years, 1 month

[linux-audio-user] muse .7.0 compilation problem

by Loknath Bharti

I am trying to compile Muse .7.0 on Mandrake 10. Everything goes well but at the end I recieve an error: /home/jill/muse/driver/jack.cpp:198: undefined reference to `jack_set_thread_init_callback' collect2: ld returned 1 exit status make[4]: *** [muse] Error 1 make[4]: Leaving directory `/home/jill/muse-0.7.0/muse' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/jill/muse-0.7.0/muse' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/jill/muse-0.7.0/muse' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jill/muse-0.7.0' make: *** [all] Error 2 If anyone could please help me in this. I have compiled the latest .99 jack but it does not help at all even after that. __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com

20 years, 1 month

[linux-audio-user] dssi-vst-0.3

by tobbe＠nyvalls.se

Failure to compile in Mandrake 10.1 Both with gcc-3.3.4 and gcc-3.4.1 I need some help with this. Stops with g++ -shared -Wl,-Bsymbolic -g3 -Wall -o dssi-vst.so dssi-vst.cpp remotevstclient.o -L. -lremoteplugin -lasound dssi-vst.cpp: In constructor `DSSIVSTPluginInstance::DSSIVSTPluginInstance(std::string, long unsigned int)': dssi-vst.cpp:154: error: ISO C++ forbids initialization in array new dssi-vst.cpp:155: error: ISO C++ forbids initialization in array new dssi-vst.cpp:158: error: ISO C++ forbids initialization in array new dssi-vst.cpp:161: error: ISO C++ forbids initialization in array new dssi-vst.cpp:164: error: ISO C++ forbids initialization in array new /Torbjörn Turpeinen (Thac)

20 years, 1 month

[linux-audio-user] Ingos V0.7.26-3 kernel doesnt boot whereas 2.6.10-rc1-mm3 does: help?

by thewade

Hello, I was wondering if anyone was able to get Ingo\'s V0.7.26-3 realtime kernel to run, especially on an AMD64 machine? When I boot his kernel I get a problem with the rghb kernel flag, and when I remove that flag I get another error (see earlier postings by myself on said topic) So in the interests of solving my own problem I decided to see if the problem was in the standard kernel 2.6.10-rc1-mm3. I can boot 2.6.10-rc1-mmm3, although my mouse doesn\'t work. (I\'ve posted a bug for this) So, what should I do now? Thanks for the help! -thewade Old message errors and support info http://music.columbia.edu/pipermail/linux-audio-user/2004-November/017167.h… http://music.columbia.edu/pipermail/linux-audio-user/2004-November/017193.h…

20 years, 1 month

[linux-audio-user] Ohh! Another new song on-line - though not by dlp ; )

by Frank Barknecht

Hallo, Dave posting his cool new song (I didn't knew, you were such a good singer!) reminded me to sometimes put up anouncements of added tracks on my page here, too. So here's a new one, which is mono, overdriven so it clips, but I still like it: http://footils.org/cms/show/28 (ogg, mp3, screenshot) It's called "Ohh!" and was done to test a new step sequencer I wrote for Pd yesterday, recorded directly to ogg using the Pd oggwrite external without any edits. It's a really silly house track done in about 1.5 hours this morning. Totally different from Dave's song. You have been warned. ;) Ciao -- Frank Barknecht _ ______footils.org__

20 years, 1 month

[linux-audio-user] HELP! trying to get midi port working under knoppix!

by airplays55＠yahoo.com

I'm trying to get a sequencer like rosegarden working under knoppix 3.4 (a debian flavor linux live CD distro). I am unable to get a midiport like /dev/sequencer to work. Although knoppix uses OSS by default, with a cheatcode I am able to boot up using the ALSA driver. But rosegarden (or playmidi) still complains that /dev/sequencer doesnt exist. How can I check if the required ALSA driver/libraries are present? With my current hardddisk install I can install missing libraries (unlike the standard liveCD). I'd like to get the external mpu401 midiport working, and also access the onboard FM sounds if possible. I have ALS100 and ESS1869 ISA soundcards and a yamaha PCI soundcard. Here is my system info: "lsmod" shows uart401, sound, and soundcore cat /dev/sndstat displays nothing. /etc/modules.conf doesnt seem to have anything relevant (grep didnt find midi or sound anywhere) What is the next step to enable my midiport? I can promptly post back any requested info. Thanks! __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

20 years, 1 month

[linux-audio-user] new song on-line

by Dave Phillips

Greetings: I've placed on-line a song I wrote and recorded with the help of Ardour, TiMidity, DOSemu & Seq+, a bunch of LADSPA plugins, a guitar, a harmonica, and my dulcet-toned vocal. It's here if you'd like to check it out: http://linux-sound.org/ardour-songs.html I'll be adding more pieces to the page Real Soon Now, but at least it's a beginning... :) Best, dp

20 years, 1 month

[linux-audio-user] Access Virus TI VST plugin

by Florin Andrei

http://www.access-music.de/products.php4 >From the specs of the newly-released Virus TI: "VirusControl™ VST and Apple Audio Unit Plug-for Mac OS X and Windows XP. The remote seamlessly integrates the Virus TI into your sequencer, making it feel just like a plug-in" Wow! That's one killer feature! Anyone knows if that VST plugin would work on Linux? -- Florin Andrei http://florin.myip.org/

20 years, 1 month

[linux-audio-user] dmix with a delta1010LT

by Glenn McCord

I've kind of asked this once before but I will ask again anyway. Has anyone got multiple audio apps to work at the same time with a delta 1010LT? It's a nuisance at times when I need ardour and xmms to coexist. I've come to the conclusion that I need to use dmix in some way but I won't lie in saying that I find reading the documentation a chore. I am merely asking if someone could share the asound.conf if they have managed to get their card to work in the way I described. It's a shame to have spent so much money on a card and to have nigly little things like this start questioning my purchase. Cheers.

20 years, 1 month

[linux-audio-user] Rosegarden not playing MIDI events

by mchristoph.eckert＠t-online.de

Hi, I recently installed Gentoo on my box, and I'm really amazed about the very recent software Gentoo has to offer. I tried to do some MIDI sequencing on my former Mandrake box, but I didn't get all things to work. So, I hoped I could do some sequencing on the Gentoo box. Unfortunately MusE still freezes as soon as I press the play button without any error message, so I installed Rosegarden. I connected my MIDI masterkeybord to my notebook using a MIDI2USB adapter (UM-1S). In Rosegarden, I can see the incoming events in the transport panel resp. the events view on each track. MIDI through just works fine, I can play my external equipment connecting both the masterkeyboard and my devices to the computer. I then have drawn a one bar segment and placed some drum notes in it. I can hear my expander playing the base and snare drum as soon as I paint a note or as soon as I klick on one. Unfotunately, Rosegarden does not play the events. As soon as I press the play button, the transport panel shortly shows that controller data is being sent, but it does not play my drum events, and the pointer does not cross my segments from left to the right. I'm really sure I simply cannot see the wood for the trees, so any hint would be really great, even if it were a RTFM - as soon as it includes a link to the correct document ;-) . But I'm kidding, I read the included manual, the FAQ and asked Google without finding the needed information. I wonder because in Rosegarden there are no pointers to be set on the left and right end of the wished playback area; am I missing them, or does Rosegarden not need them? Maybe that's the wee small thing I'm missing? Any helpful hint could turn me into a glad linux audio user, so sorry if it is a really silly question ;-) . My system includes: * Kernel 2.6.7-gentoo-r6 * ALSA Driver Version 1.0.4 * Rosegarden-4.0.9.8 Many thanks & best regards ce

20 years, 1 month

← Newer
1
...
9
10
11
12
13
14
15
...
19
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user November 2004