Linux-audio-user May 2007

linux-audio-user@lists.linuxaudio.org

159 participants
168 discussions

New realtime patched kernel 2.6.21-rt4 / nuevo kernel realtime

by Marcos Guglielmetti

(it was builded for Musix (Debian/Stable)) Installation: sudo apt-get update sudo apt-get install linux-image-2.6.21-rt4 All files: Todos los archivos: apt-cache search 2.6.21-rt4 acer-acpi-modules-2.6.21-rt4 - acer-acpi modules for Linux (kernel 2.6.21-rt4). acerhk-modules-2.6.21-rt4 - Acer Hotkey driver for Linux (kernel 2.6.21-rt4) cloop-module-2.6.21-rt4 - The compressed loopback block device kernel module fsam7400-modules-2.6.21-rt4 - fsam7400 modules for Linux (kernel 2.6.21-rt4). fuse-module-2.6.21-rt4 - Filesystem in USErspace (kernel module) gspca-modules-2.6.21-rt4 - gspca modules for Linux (kernel 2.6.21-rt4) ipw2100-modules-2.6.21-rt4 - ipw2100 modules for Linux (kernel 2.6.21-rt4) ipw2200-modules-2.6.21-rt4 - ipw2200 modules for Linux (kernel 2.6.21-rt4) linux-doc-2.6.21-rt4 - Linux kernel specific documentation for version 2.6.21-rt4 linux-headers-2.6.21-rt4 - Header files related to Linux kernel, specifically, linux-image-2.6.21-rt4 - Linux kernel binary image for version 2.6.21-rt4 linux-manual-2.6.21-rt4 - Linux kernel section 9 manual pages for version 2.6.21-rt4 linux-source-2.6.21-rt4 - Linux kernel source for version 2.6.21-rt4 loop-aes-ciphers-2.6.21-rt4 - Ciphers for the loop-aes encryption Linux kernel module loop-aes-modules-2.6.21-rt4 - loop-AES encryption modules for kernel 2.6.21-rt4 ltmodem-modules-2.6.21-rt4 - ltmodem-source modules for Linux (kernel 2.6.21-rt4). madwifi-modules-2.6.21-rt4 - modules for the Multiband Atheros Driver for WiFi (kernel 2.6.21-rt4) ndiswrapper-modules-2.6.21-rt4 - ndiswrapper linux kernel module qc-usb-modules-2.6.21-rt4 - kernel module for QuickCam Express realtime-lsm-module-2.6.21-rt4 - Realtime Linux Security module. rfswitch-modules-2.6.21-rt4 - rfswitch modules for Linux (kernel 2.6.21-rt4). rt2400-modules-2.6.21-rt4 - RT2400 wireless network drivers rt2500-modules-2.6.21-rt4 - RT2500 wireless network drivers rt2570-modules-2.6.21-rt4 - RT2570 wireless network drivers More info: http://linux.ilmainen.net/musix/linux-2.6.21-rt4/ -- `&' # Marcos Guglielmetti # Musix GNU+Linux, 100% Software Libre _#_ http://www.musix.org.ar/en (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix/ ( === ) Ecología: http://autosus.wordpress.com/ `---'

16 years, 12 months

[Freepats] Multilingual freepats mailing list / lista de mail multilingüe

by Marcos Guglielmetti

Hola, ahora la lista de mail de freepats (armada para coordinar esfuerzos para crear instrumentos libres basados en muestras de sonido (soundfonts, hydrogen, etc)), anima a cualquier persona de cualquier lengua a suscribirse y hablar en su lengua, pero hay más detalles abajo, en inglés y español: [Freepats] Multilingual freepats mailing list De: Roberto Gordo Saez <roberto.gordo(a)gmail.com> Para: freepats(a)opensrc.org Fecha: 19/05/07 14:43 [Spanish translation below / Traducción al español abajo] This message is a semi-official announcement to inform everybody that the freepats list is now open to multiple languages. We have noticed that some people would want to participate, but they are having problems writing in english. Based on our previous conversations in this list, it seems that there are already many Spanish-speaking people willing to participate. Of course, interested communities of any part of the world, in any language, would be welcomed. In the future, if more people joins, the list could be splitted into several language-dependant lists. Currently we have very few messages in this list, so we think that it would be better to center all efforts in the same place. Anybody can send non-english emails for coordination with other people, or when your main target (the person or group you are most interested in reading your message) does also speak your language. It would be better to use English for announcements of general interest. if you can. Also, keep in mind that other people (mainly Mark :-) ) may be wondering what are you talking about or may become interested and ask you for information in english, to be able to participate on a conversation. I think it would be also a good idea to keep the subject of the email in the same language than the body. This way, it would be easier for people who does not understand a particular language to skip those emails. In either case, do not take these guidelines too strictly, they are only my own hints. It can be summarized in: do not stop yourself when posting a message in any language. We will try to deal with it, and probably someone can translate it when needed. Currently, most important for us is to keep our efforts alive. Let's try and see what happens with our Tower of Babel. ******** Spanish/español Este mensaje es un anuncio semi-oficial para informar de que la lista de correo de freepats está, a partir de ahora, abierta a múltiples idiomas. Hemos notado que hay personas quieren participar, pero escribir en inglés supone un obstáculo. Según las conversaciones anteriores en esta lista, parece que hay actualmente bastantes personas hispanohablantes interesadas en participar. Por supuesto, serán bienvenidas comunidades de cualquier parte del mundo interesadas, en cualquier idioma. En el futuro, si se apunta más gente, la lista podría dividirse en varias listas según el idioma. Actualmente hay muy pocos mensajes en esta lista, así que pensamos que sería preferible concentrar todas las iniciativas en el mismo sitio. Cualquiera puede enviar mensajes en su idioma nativo para coordinarse con otras personas, o cuando sabes que el receptor principal (la persona o grupo que más te interesa que atienda a tu mensaje) habla también tu mismo idioma. Sería preferible utilizar inglés en las noticias de interés general, si te resulta posible. También, ten en cuenta que otras personas (principalmente Mark :-) ) se preguntarán sobre lo que se está hablando en una conversación o podrían interesarse por el tema y solicitarte información en inglés, para poder participar en una conversación. En mi opinión creo que sería también buena idea mantener el asunto (subject) de los mensajes en el mismo idioma que el contenido. De esa manera, a las personas que no entienden un idioma en concreto les resultaría más sencillo saltarse esos mensajes. En cualquier caso, no es necesario que tomes muy estrictamente estas recomendaciones, ya que es sólo mi opinión. Podemos resumir todo en: no tengas inconveniente en enviar mensajes en cualquier idioma, intentaremos entendernos todos lo mejor posible y probablemente alguien lo podrá traducir cuando sea necesario. Actualmente lo más importante es facilitar las cosas ante cualquier iniciativa. .......... -- `&' # Marcos Guglielmetti # Musix GNU+Linux, 100% Software Libre _#_ http://www.musix.org.ar/en (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix/ ( === ) Ecología: http://autosus.wordpress.com/ `---'

16 years, 12 months

error configuring qjackctl-0.2.2-2 on debian lenny

by David Adler

hello people, I try to configure qjackctl-0.2.2-2 on debian lenny and I get checking whether QTDIR environment variable is set... no configure: error: QTDIR must be properly set. Spent quite a time on google by now, but none of the solutions changed anything. on this list I found the hint to set QTDIR=/usr/share/qt3 somewhere else QTDIR=/usr/include/qt3 or QTDIR=/usr/lib/qt3 but neither changed anything. The header-files (if its them, the configure-script is looking for) are actually in /usr/include/qt3, libqt3-headers, libqt3-mt-dev and qt3-dev-tools, all version 3:3.3.7-4, are installed. would not mind installing qjackctl via apt-get, but: The following extra packages will be installed: libjack0.100.0-0 I manually installed (and need) jack-audio-connection-kit 0.103.0-1 (with checkinstall) - don't think it is a good idea to say yes here. Am I missing something very basic? in any case i would like to learn more. cheers, david

16 years, 12 months

sineshaper clientname

by Atte André Jensen

Hi again Is it possible to make sineshaper start with a certain clientname (jack and midi)? The default second name (with appended pid) is not that handy for saving connections in something like ardour... -- peace, love & harmony Atte http://atte.dk | http://myspace.com/attejensen http://anagrammer.dk | http://atte.dk/compositions

16 years, 12 months

Generic Linux keyboard

by lanas

Folks, Is there such a thing as a 'generic' MIDI keyboard with a LCD that can display info retrieved from Linux synths apps ? Such a keyboard interfaces directly with a Linux box runnign various sound-producing apps. The controls on the keyboard itself can choose between Qsynth, Zyn, etc... It could eventually even choose which soundfont in QSynth or which sound in Zyn. Does such a keyboard exist ? Just asking ;-) Cheers, Al

16 years, 12 months

Re: Re: A place on the web to put some toons (Mysth-R)

by julien bodd

..parenthesis..I like your music man, nice ambiance! julien.

16 years, 12 months

knowing JACK

by Dave Phillips

Greetings: Some time ago I wrote a rather lengthy user-level introduction to JACK. It was published in a German Linux magazine, and I'd now like to put the original on the Web. However, it surely needs updated, so I've placed its current condition on-line here : http://linux-sound.org/knowing-jack.html At this time I'm looking for corrections and additions to the main text. I've purposefully left out the screenshots, I'll update them myself after the text is up to date. I'm not using FreeBob or JackMIDI and would apprciate any information readers think should go into the article. Please advise if any information regarding the QJackCtl audio options needs changed. Users often wonder what all those checkboxes actually do, and I'd like to give them the right info. Btw, this artice is *not* planned for publication again, and I'll happily place it under a CC license if desired by the community. If acceptable I'd like it to go on the linuxaudio.org site. Feel free to respond to the lists or directly to me. Best, dp

16 years, 12 months

Re: Re: [music] latest tune

by julien bodd

Hi James, Brian, Thanks for the comments! Indeed, the voice is too repetitive. I should cut it off sometimes, and make some more melody variation, jamming.. The backwards voice is a thing to try! May be I should also add a some point change the tone (add other chords), may be to make it sad in the middle. But at the end again joyfull.. Julien.

16 years, 12 months

Re: Newbie, where should I start?

by Kjetil S. Matheussen

Folderol: >> Hi guys, >> >> I'm trying to setup a `proof of concept' sound processing system on my >> machine, using Linux. The system should cater rock/metal bands. Now I need to >> know where to start and what to look at. There's so much documentation and so >> many software out there that I'm getting confused and don't know where to >> start. I have around a month to set up the system, so as to give a >> presentation and a live demo at a local community event. >> >> I generally prefer to know my theory properly before practically implementing, >> so please tell me what background knowledge I should ideally have to >> implement such a system. >> >> Any links, hints, pointers etc. very much appreciated. >> >> Thanks a lot. >> >> P.S. I'm using Gentoo and have access to the pro-audio overlay. Also, since >> this is just a proof of concept type project, I won't be spending on >> hardware. I have a Sempron64 2500+ machine with 1GB of RAM and plenty of hard >> disk space, although on 7200 rpm PATA. I think I can borrow a Creative SB >> Live 5.1 sound card from my boss for the project. As a start I suggest installing jack, ardour and all ladspa plugins available. You can also boot the dynebolic cd to check out various media software in a quick way: http://www.dynebolic.org/ > To start off with, I would suggest you get 64studio. It will give you > most, if not all, the packages you want as standard. > > I have it working very well on a similar Sempron setup (as well as other > machines). > Well. He is already using Gentoo using the pro-audio overlay. gentoo+pro-audio probably has a lot more (audio) packages than 64studio.

16 years, 12 months

Fluidsynth basic experimentation: buffer overruns

by lanas

Hi, I'm experimenting with fluidsynth at its simplest form, that is, directly from the command line and using the fluidsynth shell. So I start fluidsynth like this: fluidsynth -m alsa_seq -a jack /usr/local/share/SF/Unison.sf2 Jack is already started using qjackctl. As soon as I use qjackctl to connect a MIDI keyboard to that fluidsynth instance, the following messages are shown by fluidsynth, non stop, wohtout even playing a note: fluidsynth: warning: ALSA sequencer buffer overrun, lost events The MIDI kyb is connected via a M-Audio 1010LT card. Are these messages important and if not, how to make them go away without altering the source code ? Thanks.

16 years, 12 months

← Newer
1
...
5
6
7
8
9
10
11
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user May 2007