Linux-audio-user July 2012

linux-audio-user@lists.linuxaudio.org

99 participants
124 discussions

by Ralf Mardorf

> Does anyone know of a (preferably command line) program to generate > chord names from note values. I'd like to be able to type in something > like: > > >> c d g > > and get back > > G major > > or something like that. c + d + g = G major? ... "or something like that"? ;). Personally I don't give a damn to the theory of harmony, however, there hopefully isn't a CLI that answers "G major" to the question "c d g" :p. Some sequencers provide this information. Dunno if those sequencers are only Non-Linux-Sequencers, since I don't care about the theory of harmony in that kind of way. However, test Rosegarden and Qtractor if you should be able to use a GUI (no braille), perhaps one of them will support chord detection. I suspect you already googled for a CLI able to do this?!

13 years, 2 months

Using Alesis iO2 Express as pre-amp

by Andre Colomb

Hi folks! I'm about to order an Alesis iO2 Express interface, primarily for bass practice and simple single-track recordings at home. I see that the interface has a direct monitor path to route inputs to outputs without latency. I would like to use this for my bass to practice with headphones or stereo speakers. Since the documentation doesn't tell much about the monitoring capabilities, I'd like to know whether direct monitoring works when the device only has bus power supplied, but not a real USB host. There are very cheap USB power supplies available that just have the +5V and GND pins connected. Could someone with access to this kind of interface please confirm whether the direct monitoring works with only USB bus power connected? Or does anyone know of a different device with such "offline" capabilities? Regards, André -- Greetings... From: Andre Colomb <acolomb(a)schickhardt.org>

13 years, 2 months

Another Sabbath cover

by Ken Restivo

You asked for it (well, Helmut asked for it), you got it: http://storage.restivo.org/music/Lahar/lahar-wizard.ogg That's Better Than Lahar, live at Boom Boom Room, January 26, 2010. The clav is a fluidsynth soundfont through Fons's auto-wah plugin. The Ozzy impression is me once again. -ken

13 years, 2 months

Introducing Axiome, live looper for Livid Block and Monome

by Heikki Ketoharju

Hi everyone! I purchased Livid Block controller a while back, and noticed that there aren't pieces of software to run with it if you're in Linux. So I took a Pure Data patch called Axiome, a mlr clone made to Monome 40h, and modified it to work with Livid Block. Because Block is standard midi controller, Axiome kind of works with any midi equipment. In practise it currently has Block-specific note values hard coded, but I've made some tests to get it working even with an ordinary midi keyboard. Some cool features: * Seven simultaneous loops * Tempo independent pitch shift * Midi learn (only for the channel gains at the moment) * Automatic loop adjustment to the tempo * Nice and easy to use GUI So if you are Monome or Livid Block user, please check it out! It runs on top of Pd-extended. Ubuntu 12.04 users should read a whole page carefully in order to get Pd-extended running. (At least I had serious problems when testing this in my Ubuntu box.) http://heikki.ketoharju.info/axiome/ -- http://heikki.ketoharju.info

13 years, 2 months

testing

by S. Massy

Test! --

13 years, 2 months

Music made with linux... from the vaults!

by Ken Restivo

Cleaning out a hard drive, and found this atrocity from about 4 years ago: http://storage.restivo.org/music/krmusic/semipublished/fairies-0.3.ogg Made completely with Linux. Back from the days when remixes were in fashion. It's a cover. See if you can guess. It kind of takes a long time to go anywhere, if you start to lose patience, just wait until a minute in. -ken

13 years, 2 months

Re: [LAU] a new song

by Jason Jones

Dave was kind enough to give me the session files to this great song, and I happened to have a studio session cancel tonight, so I worked a bit on this one. Let me know what you guys think! Done entirely in A3. http://advancedbudgetstudios.com/clients/testbed/On_Board_The_Blues.mp3 --Jason www.advancedbudgetstudios.com On Mon, Jun 11, 2012 at 5:31 AM, Dave Phillips <dlphillips(a)woh.rr.com>wrote: > Hi Fons, hi Jason : > > Okay, I've tarred the Ardour3 session, it's about 357 MB with all WAV > files used in its production. It's up at : > > http://linux-sound.org/misc/**onboardtheblues.tar<http://linux-sound.org/misc/onboardtheblues.tar> > > I'd like to remove the tarball after you've downloaded it, so let me know > when you have it. The material is extremely messy, you'll get an inside > look at how I manage to make a passable purse out of a sow's ear. :) You > may do as you wish with the session. Btw, it was created with a very recent > version of A3 built from SVN sources. > > Best regards, > > dp >

13 years, 2 months

Re: [LAU] Envy24Control: loading saved profiles

by Chris Caudle

> Sorry of this sounds simplistic, but I haven't found the 'load' > button in envy24control. I've saved a config using the 1st position, > giving it a name, a pressing the 'save active profile', all under the > profiles tab, but how to load it back ? I never saw an answer to this come across the list, so just in case it wasn't answered privately: The profile number button automatically loads the profile when selected. In other words, when you click the "1" button on the profiles tab, it loads whatever information is associated with that profile. If you change the settings and close the program without saving, when you select the "1" button the older settings will be reloaded. If you change the settings after that and select the "save" button, the changes will be saved to the currently selected profile. The man page implies you should be able to have the profile loaded at startup by passing the profile number to the program, e.g. alsa24ctl 1 but I have not verified that myself yet. -- Chris Caudle

13 years, 2 months

Re: [LAU] [ANN] setBfree - DSP tonewheel organ

by Julien Claassen

Hi Robin1 Thanks a lot for this answer. This sounds just perfect. I will have fun with it tonight! Warm regards Julien =-=-=-=-=-=-=-=-=-=-=-=- Such Is Life: Very Intensely Adorable; Free And Jubilating Amazement Revels, Dancing On - FLOWERS! ====== Find my music at ====== http://juliencoder.de/nama/music.html ..................................... "If you live to be 100, I hope I live to be 100 minus 1 day, so I never have to live without you." (Winnie the Pooh)

13 years, 2 months

Fedora Jam test day July 25th

by Jørn Lomax

I am happy to announce the first test day for Fedora Jam on July 25th. Fedora Jam is a new Fedora spin targeting audio creators and producers. It includes a full set of lv2, dssi and ladspa plugins (and some others). It also includes all of the most popular audio programs as defualt, Ardour, Audacity, Bristol, Lilypond and MuseScore to mention some. It comes configured with the JACK audio system be default and uses KDE as it's desktop environment. This will be an informal test day as the official test days for fedora 18 has not yet started, but we would like to have as many as possible try it out and help with bug report, tips or just general comments to help make this the best operating system for audio enthusiasts. more info can be found on the fedora wiki[1] or by contacting me :) [1]http://fedoraproject.org/wiki/Fedora_jam regards, -- Jørn Lomax GSoC atudent, Fedora audio Spin CS Student University of Tromsø

13 years, 2 months

← Newer
1
...
4
5
6
7
8
9
10
...
13
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user July 2012