Linux-audio-user January 2013

linux-audio-user@lists.linuxaudio.org

140 participants
130 discussions

by Ralf Mardorf

Artists of the Universal Music Group likely are members of the GEMA, even if they aren't Germans. If they catch you when smoking weed in Germany, the sentence isn't very hard, but if they catch you playing copyright music of GEMA members you are done. Some countries completely don't care about copyrights , but they kill you if you're smoking weed. When in Rome, do as the Romans do! -- No good deed ever goes unpunished. Einer guten Tat folgt die Strafe auf dem Fuße!

13 years, 1 month

[LAU] New music: Dark Dreams (a piece of incidental music)

by Julien Claassen

Hello everyone! To celebrate my latest toy (an Arturia MiniBrute, fully analogue synth) I recorded Dark Dreams. OK, I had the piece before and then just decided to complete it with my new toy. The final mix is perhaps not as clean as I might have preferred otherwise, but I wanted to hear a final result and send it off to a good friend of mine. :-) Still you might enjoy it. http://juliencoder.de/nama/radioplayer/dark_dreams.ogg Or for the ogg-deficient: http://juliencoder.de/nama/radioplayer/dark_dreams.mp3 Or reachable from the Radioplayer mainpage: http://juliencoder.de/nama/radioplayer/index.html Instruments used: lots of MiniBrute and LinuxSampler for the drums. Thanks to the Calf team for yet another impressive effect, that has made my day: the MultiVoice Chorus. What a beast! Also thank you Tim for your new CPAS plugins, though I've only used the plate2x2 and the reintroduced old chorus (on the stringy/paddy sounds) for this piece. Others will follow and they will have need of more interesting plugins. Feedback as ever is welcome. :-) Darkly yours :-) Julien ---------------------------------------- http://juliencoder.de/nama/music.html

13 years, 1 month

Re: [LAU] netjack2: Is there some documentation somewhere?

by Len Ovens

On Sat, January 19, 2013 12:45 pm, Jannis Achstetter wrote: > Am 19.01.2013 21:18, schrieb Len Ovens: >> Google... gets me the idea of doing: >> pc master: >> jackd -d alsa >> jack_load netmanager >> slave: >> jackd -d net -C 2 -P 2 >> Listening on '225.3.19.154:19000' Is what I get.... ifconfig shows: eth0 Link encap:Ethernet HWaddr 00:11:95:5e:1a:4c >> inet addr:172.17.128.45 > 225.X.X.X is a multicast-IP and does not realate to the > unicast-IP-address of the interface at all. That solution should work. If it doesn't, a wireshark/pcap-trace might be useful to get information. Ah, Thank you for clearing that up. How picky is netjack2 about jackd version? I am realizing that master is testing UbutuStudio 13.04 jackd 1.9.9.4 and the client is running UbuntuStudio LTS (12.04) Jackd 1.9.8. Rebooting the master to 12.04... Ah,,, Hmm, I seem to be using jackd from kxstudio... 1.9.9.5, I guess that is what I will move the client to as well.... Ok, Both computers are at 1.9.9.5 now and I have a connection. Not only are netjack and netjack2 different, but there are some incompatibilities from 1.9.8 to 1.9.9 as well. Interesting, I got the idea that the number of lines defaulted to 2 i/o, but instead it seems to default to whatever the sound card is (12i/10o in this case) They do not auto connect (probably the correct way things should be) which means if I wanted to use the master as a headless audio card, I would have to set up a session to do that. Seems to handle 20 lines at a time on a 100m network. (Audacious connects to all 20 outputs I set up) Qjackctl is ok (even using the dbus option) for starting up the master side, but it is not so useful for setting up the client side. It will the the net backend in place but does not have a place for port numbers for audio and midi. -- Len Ovens www.OvenWerks.net

13 years, 1 month

[LAU] Radium Compressor V0.0.1

by Ralf Mardorf

Some Asian countries tend to kill people who have contact to drugs, homosexuality is indictable, they tend to call it sodomy by their laws, they don't have liberty of the press, they ignore protection of species + they tend to ignore copyrights, patents, human rights, safety regulations for the illegal copies of patented products they try to sell on the European market. The German law is hard regarding to offended copyrights and patents. The GEMA is a mafia, they overdo their work, ruin the lives of people who didn't pay the GEMA, even kindergartens are sued for singing songs in public. IANAL. I hope you're aware that if you make a joke about Mohammed, it could cause, that in some Islamic countries the ambassador of your country will be killed. ;) -- No good deed ever goes unpunished. Einer guten Tat folgt die Strafe auf dem Fuße!

13 years, 1 month

[LAU] netjack2: Is there some documentation somewhere?

by Len Ovens

I am trying to set up a netjack2 link from one computer to another. I have found a number of netjack related things in /usr/bin. There is jack_net_master and jack_net_slave... no man page for either and the help options ( -h) don't say much either. I have tried any combination of IP in both ends (4 in total) but it is always waiting for a connection. Ping works both ways. There is also jack_netsource... this one has a man page which suggests a setup like: On hostA: jackd -d alsa jack_netsource -H hostB -n1 -i4 -o4 -I0 -O0 On hostB: jackd -d net So having replaced the word hostB with thge IP of hostB still gets me no connection though the ports do show up in the connection dialog on the master side (hostA). (nothing on hostB) Google... gets me the idea of doing: pc master: jackd -d alsa jack_load netmanager slave: jackd -d net -C 2 -P 2 Listening on '225.3.19.154:19000' Is what I get.... ifconfig shows: eth0 Link encap:Ethernet HWaddr 00:11:95:5e:1a:4c inet addr:172.17.128.45 So I am not sure where the 225.3.19.154 comes from or how it is possible for the netmanager to be "listening" on that port. One of the pages points to: http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack2 Which gives me errors... the main jack page says trac is down since December... so that is no help either. My setup is: hostA(audio IF I want to use)-----switch-----hostB | -------rest of LAN Right now I just want a connection. Then I can play with other settings. -- Len Ovens www.OvenWerks.net

13 years, 1 month

[LAU] planning on doing overdubs in ardour from pro tools session

by Aaron L.

Hi all. Quick question...... I have a rough mix of a band (stereo wav file) done in pro tools that I'd like to do vocals over. I plan on importing that file into Ardour, doing vocals and then exporting the vocal track out to send to my friend to mix. I've done this before with a Mac and Digital Performer but I'd rather not do that again. If the sample rates are similar, do I have anything to worry about in terms of jitter or other digital oddities when I give the vocal.wav file back to my friend? Things should be fine, correct? Thanks for any advice. -Aaron

13 years, 1 month

Re: [LAU] Panning based on Haas effect

by Ralf Mardorf

"I was thinking to do totally mono mix and using delays to add some spacial localisation for individual instrument between LR." This is possible and could archive mono compatibility, but it also could cause issues. You music will sound different with different speakers, in different rooms etc., so what's bad with a stereo mix, that isn't absolutely hard to the left and right. It doesn't matter, if the volume of the HiHat is a little bit louder or silenter when moving around the room. Do conservative panning by the pan pots and add some decent room by early reflections of a reverb. -- No good deed ever goes unpunished. Einer guten Tat folgt die Strafe auf dem Fuße!

13 years, 1 month

Re: [LAU] Panning based on Haas effect

by Ralf Mardorf

Perhaps you want to do a stereo mix, that is so minimal stereo, that it's nearly mono. This would archive that everything does sound similar by just listening to the left, right or both channels panned to mono. If it's too mono like for your taste, you might want add some early reflections from the direction the instrument should be, to spread the stereo impression. I don't know if it's that what you want to do with the Haas effect. When reading your mails and translating it by my broken English, I guess you try to get one channel's signal to the other channel, by playing it silent and a little bit earlier on this channel. This would cause that doing a sane mix will become harder, than easier to do. -- No good deed ever goes unpunished. Einer guten Tat folgt die Strafe auf dem Fuße!

13 years, 1 month

[LAU] [ANN] Radium Compressor V0.0.1

by Kjetil Matheussen

Radium Compressor is the system compressor in Radium, but distributed as a standalone jack application. Radium Compressor uses the stereo compressor found in effect.lib in the Faust distribution. This compressor is written by Julius O. Smith III. The GUI shows accurately the sound used for compression, and how much the sound is being compressed. I haven't seen this in any audio compressor GUI before, but it's probably been done before. Demonstration video: http://www.youtube.com/watch?v=KphCxloBq2w Tar-ball: http://archive.notam02.no/arkiv/src/?C=M;O=D Source repository: https://github.com/kmatheussen/radium_compressor

13 years, 1 month

Re: [LAU] Panning based on Haas effect

by Jaromír Mikeš

2013/1/18 Jan Depner <eviltwin69(a)cableone.net>: Hi Jan / Ralf > TAP Stereo Echo has a HAAS effect switch. I use it all the time ;-) How you are using this pluging for haas panning? I tried put down dry signal totally , delay on both channels 0ms for beginning , feedback 0% on both channels, and echo level 0dB on both channels. With this setting I am getting only to left output :( Ardour 2.8.14 Tap plugins 0.7.2 mira

13 years, 1 month

← Newer
1
...
4
5
6
7
8
9
10
...
13
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user January 2013