Hey hey,
The Erfurt Sketches 2 was composed and recorded back in November of last year,
mostly durning a three day visit to Erfurt. The tracks were recorded in the
following week or two. They weren't published, because really one song was
missing. It is left that way in the version up now:
http://juliencoder.de/nama/erfurt_sketches_2/
The album is divided into two parts: the first four tracks give a
light-hearted, playful impression of the scenery and events. The Lutherstiege
and Novembernebel von der Gera, maybe even Roonie Spice, might fall under the
heading of furniture music. The second half is dedicated to one special person
alone and goes much deeper, turning to a darker and sadder page.
Technically speaking this album is simple: a commercial piano sample, a
drumkit mixed and matches, a free bass soundfont and setBfree. Add jconvolver
with a few good IRs and Nama to bring it all together.
Feedback, as ever, is very much appreciated and in the meantime I hope that
you enjoy the music and your summer holidays, if you have that luxury.
Best wishes,
Jeanette
--
* Website: http://juliencoder.de - for summer is a state of sound
* SoundCloud: https://soundcloud.com/jeanette_c
* Youtube: https://www.youtube.com/channel/UCMS4rfGrTwz8W7jhC1Jnv7g
* GitHub: https://github.com/jeanette-c
* Twitter: https://twitter.com/jeanette_c_s
She's so lucky,
she's a star
But she cry, cry, cries in her lonely heart... <3
(Britney Spears)
Made using all free native linux plugins: GeonKick, Calf studio, GVST,
Distrho ports, Helm synth, Dragonfly Hall reverb, U-he Podolski, and Ardour
native plugins (sidechain compressor, eq, filter).
Thanks to all the people who make opensource and free software!
https://www.youtube.com/watch?v=fVylIteHRpU
Hey hey,
just a small, one-track instrumental piece, almost acoustic. No MIDI notes
were hurt or mangled in this performance. :)
youtu.be/VwU1m9iE1fQ
It's a simple little song played on a synth guitar that I created just the
other night on a VA synth. It was edited with some EQ, a slight touch of plate
reverb (Thank Tomasz TAP) and a little vinyl. Though the Calf Vinyl didn't run
correctly in mod-host - nor using lv2apply -, all constant noises, except for
the motor were gone after a second or two.
Never mind, enjoy and if you like send me some feedback. :)
Best wishes,
Jeanette
--
* Website: http://juliencoder.de - for summer is a state of sound
* SoundCloud: https://soundcloud.com/jeanette_c
* Youtube: https://www.youtube.com/channel/UCMS4rfGrTwz8W7jhC1Jnv7g
* GitHub: https://github.com/jeanette-c
* Twitter: https://twitter.com/jeanette_c_s
Open my eyes,
I look deep inside,
I run away... <3
(Britney Spears)
Hi Ralf,
Thanks for taking time to reply. Regarding the April fool hoax, I am not
sure I understood what was obviously suspicious (thanks to my ignorance). I
do have a Mountain Lion MacOS setup on Oracle Virtualbox VM running on my
Linux host, alas with no sound. Sound was one of the few remaining problems
that I couldn't fix, but I thought it to be more because of a working kext
that is compatible with the emulated (even crappy) sound device (s.a. SB10
or intelHDA... although I don't think IntelHDA is that bad for say amateur
home-studio work).
The Windows 10 guest VM is able to render sound alright (from a browser),
so audio out didn't seem to be too much of an issue. Hadn't attempted
recording in the guest yet. The 3 applications (requiring audio in-out) I
had in mind for Windows guest were:
1. Mobius looper - It requires audio in/out and MIDI in (for foot-switch
controls). This software is available only for Windows and Mac. Yet to try
with Wine.
2. Skype for Business - Currently I am using SfB Android application on a
super-slow Android VM on Virtualbox, apart from it being feature-crippled.
I need it to join my office call from my home PC. Wanted to see if I could
use the fully feature Windows client in in Windows10 guest. Tried without
success on Wine.
3. Guitar Rig5 - Cab/Amp modelling, effects. I've used Guitarix and
Rakarrack, but miss the arguably better modeling that GR5 offers. Tried
without success on Wine.
The MIDI input to the VM would be using serial-over-USB from an Arduino
based DIY foot-controller that encapsulates MIDI over serial (over USB).
I've done some microprocessor and single board computer development on VM,
I know that the serial ports work reasonably well in VMs.
regards,
BD
On Sat, Aug 10, 2019 at 2:37 PM Ralf Mardorf <ralf.mardorf(a)alice-dsl.net>
wrote:
> Hi,
>
> what kind of audio apps do you want to run in a Windows guest?
>
> Usually it's vice versa, audio software does work when running it under
> wine, but does not work, when running it in a Windows guest, since
> Linux does access the hardware and provides the drivers.
>
> Usually a virtual machine provides to chose between a few audio
> device emulations and has got a bridge to the Linux host to access the
> real sound card via ALSA, OSS or a sound server. This does mean, that
> Windows does access a faked (virtual, emulated) crappy sound card and
> not the real sound card.
>
> I don't know if there even is a way to get a bridge for MIDI, maybe by
> enabling serial ports.
>
> Btw. an April fool hoax does address this issue:
>
> https://lists.ubuntu.com/archives/ubuntu-users/2019-April/296577.html
>
> Regards,
> Ralf
>
--
regards,
Banibrata
http://www.linkedin.com/in/bduttahttp://twitter.com/edgeliving
Hi all.
As usual the second Tuesday of the month is upon us. I'll be in the
mainhall from 20:00.
See you there.
Suggested discussion topic:
Anyone going to Chaos Communication Camp? Should we do a LAU thing
there?
Cheers
/Daniel
Hi everyone,
in the last couple of weeks I started playing with jconvolver. (Thank you
Fons!)
First I tried it on OSX and it works quite nice there with some FIR I
generated.
When I tried the same on Manjaro I ran into a problem.
I start the Jack server using Cadence (as I usually do), but when I try to
start jconvolver in the terminal it returns a message that no Jack server
is running.
All other applications (ardour carla etc.) work fine.
I tried to delete the Jack configuration files but that did not help
I also tried to run jconvolver -s jackd / jconvolver -s jackdbus but also
without success.
I have run into a wall trying to find the cause of the problem.
I would really appreciate if someone could point me in the right direction.
Best regards
Moshe
Hi!
Some of you already know Sebkha-Chott, some others don't. For those
ones, Sebkha-Chott was a french avantgarde rock band, implying three
musicians (2 bass/guitar players, one drummer) and a bunch of free
softwares (synths, loopers, samplers, mixers, and even light manager and
VJ-ing).
Sebkha-Chott ended up his 15 years story in December 2015. Still we
recorded our last album called CRPTS ND TPSTRZ in 2014, and it took some
time for me to mix and master it (with ardour), so it's out just by now.
It's been thought as a "concerto" between a small acoustic band and very
electrised things. It opens on a very light sequence, but there's some
harder things to come then...
You can listen to it here:
https://sebkhachott.bandcamp.com/album/crpts-nd-tpstrz
And you can check the VERY LAST video of Sebkha-Chott here (subtitles in
english available): https://vimeo.com/347468468
ALL PROGRAMS used to realize this album were free softwares, including
scribus and gimp for the cover.
As far as sound is concerned, here is what we've been using:
- Ardour2.8 (we were in 2014) for the recording and mixing,
- Ardour5 for the mastering,
- TAP, swh, C*, calf plugins,
- ams,
- tapeutape,
- x42-fat (forked by us),
- calfjackhost,
The hardware was the following:
- RME HDSP 9652
- Alesis HD24XR ("ADAT-ly" wired to HDSP)
- TL-Audio Ivory 2 preamps
- Focusrite Saffire preamps
- Adam A7 monitors
- Genelec 8020A monitors
- mics : Neumann TLM 103, AKG C 414 XLS, Neumann KM 184, Sennheiser MD
421, Beyerdynamic RE 20, Shure Beta 52, 56, 91, Beyerdynamic Opus 88,
Audio technica AT4040...
Well that's it, you should not get some other news from Sebkha-Chott, as
the band is now definitely dead, as you might read in the death notice
sent several weeks ago:
Hey yo ! Tupac Promo speaking in the keyboard...
Well, Dude, it's a bit harsch to manage to send you a message throughout
death-realms-internets.... Ya gotta pass through a darknet backdoor
located on styx-the-band.onions, and then listen to the whole band
discography, and.... well, let's be quick, I let you with the Tyrant....
Errrrr, no, I can't let you with the Tyrant, actually, cuz he's quite
dead by now, and if you ask me, it's going to last a bit.... So let's
get straight to the point: below you'll find his death notice, some
announcements, and hist last words:
*$$$$$$###### DEATH NOTICE ######$$$$$$*
Wladimir Ohrelianov II, the Tyrant, is definitely and totaly dead for
real on 2019, July, the 11th (or, if you prefer8 Dhou Al-Qi'da 1440 -
الخميس ذو القعدة , or even cycle 78, chinese year Ji-Hai (36), or even
even the 23 Messidor of Year 227), in a shameful cowardful and unfair
terrorist attack based upon peanuts [1]. The Geminos Nots Awful Mitzahal
Jacquie & Michel died as well in the attack.
SEBKHA-CHOTT KOURT is not anymore, will never be again, and might as
well never have been [2].
Every Ohreland mourners (numerous they are) are since doing their job
very well, and, consequently, seas level is raising up (which is a good
thing, as it's summer time in the North Countries). If someone tells you
it's a matter of climate or climax change, you now know it's FAKE [3].
Ohreland has ended, and the world is not getting better, this shall be
taken as a proof-of-concept that diktat is not that bad.
The whole G7 line-up is now wining and missing WOII [4]. If someone at
the G7 doesn't, it's probably an altermondialist disguised into Donald
Trump or Emmanuel Macron.
Sebkha-Chott Kourt legacy towards the 7 billions of moron copulating the
Earth might be heard, copied, distributed, stolen, there:
CRPTS ND TPSTRZ - concerto pour ötto-tamponneuses et orchestre de
chambre de passe
https://sebkhachott.bandcamp.com/album/crpts-nd-tpstrz
*$$$$$$###### END OF DEATH NOTICE ######$$$$$$*
*$$$$$$###### WANTED ######$$$$$$*
If Sebkha-Chott Kourt gave you happiness, smile, orgasm, spasm, several
bitcoins, unspeakable disease, you can follow the kk-wets gang, which
seems to be proven to be guilty of Sebkha-Chott Kourt's death, on
https://plagiat.org .
*$$$$$$###### END OF WANTED ######$$$$$$*
*$$$$$$###### TYRANT LAST WORDS ######$$$$$$*
" Hhhhhhh..... hhh. hhhhhh..... h......... h.......hh......hhhh
............"
May Ariel Sharon do best....
*$$$$$$###### END OF TYRANT LAST WORDS ######$$$$$$*
So, here it is. Finished, over, terminated, definitely. Thanks to have
been there listening and following the Kourt, it was nice of you, but
now you got to think about something else[5] ; anyway Sebkha-Chott was
"so 1999-2015".
Don't answer this mail, it won't go anywhere. If you want to contact the
Kourt, contact the AMMD: https://www.ammd.net .
--- The ROTTEN SEBKHA-CHOTT KOURT ---
[1] Breaking news - terror attack video here : https://vimeo.com/347468468
[2] https://sebkhachott.bandcamp.comhttps://archive.org/search.php?query=sebkha-chott
[3] More infos on https://www.truthbrary.org
[4]
https://framapiaf.s3.framasoft.org/framapiaf/media_attachments/files/003/97…https://framapiaf.s3.framasoft.org/framapiaf/media_attachments/files/003/96…
[5] https://plagiat.org
Hi Ralf,
Sorry to hear that you were banned.
I thought already that o didn't see any posts from you a long time.
Thanks for responding though.
I have exactly the same output when I try to start jconvolver.
Did you find a solution?
Best regards
Moshe
On Tue, Aug 6, 2019, 12:00 Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote:
> On Tue, 6 Aug 2019 10:50:41 +0300, Moshe Werner wrote:
> >When I tried the same on Manjaro I ran into a problem.
>
> [rocketmouse@archlinux ~]$ pacman -Q jack2 jconvolver
> jack2 1.9.12-9
> jconvolver 1.0.3-1
> [rocketmouse@archlinux ~]$ ps aux | grep jackd
> rocketm+ 22722 1.0 1.1 214112 95464 ? SLsl 10:46 0:03
> /usr/bin/jackd -dalsa -dhw:HDSPMx579bcc -r48000 -p256 -n2
> rocketm+ 22940 0.0 0.0 7424 2388 pts/0 S+ 10:52 0:00 grep jackd
> [rocketmouse@archlinux ~]$ jconvolver /mnt/music/jconvolver/chapel.conf
> Cannot connect to server socket err = No such file or directory
> Cannot connect to server request channel
> jack server is not running or cannot be started
> JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping
> unlock
> JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping
> unlock
> Can't connect to JACK
>
> Off-list and breaking the thread, since I'm banned for absolutely
> no reason from this and any other list dominated by David. Must be his
> kindergarten attitude :D.
>
> FWIW
> [rocketmouse@archlinux ~]$ pacman -Qi jconvolver | grep Packager
> Packager : David Runge <dave(a)sleepmap.de>
>
> Regards,
> Ralf
>
Hi
I have a realtime audio server running mpd with an external DAC connected to a
USB2 (full-speed) port.
I am in doubt as to how the rtirq configuration should be at best, in
particular the entries:
RTIRQ_NAME_LIST=
RTIRQ_NON_THREADED=
RTIRQ_HIGH_LIST=
Thanks in advance for you help.
Regards
--
My setup is here below:
rtirq package: rtirq-init version 20150216-2
~~~
$ cat /proc/asound/cards
0 [MDAC ]: USB-Audio - Audiolab M-DAC
Lakewest Audio Audiolab M-DAC at usb-0000:00:1d.0-1.6,
full speed
~~~
~~~
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MDAC [Audiolab M-DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
~~~
~~~
$ cat /proc/asound/modules
0 snd_usb_audio
~~~
~~~
$ sudo lspci -v
...
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
(prog-if 20 [EHCI]) ...
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
...
~~~
~~~
$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
...
23: 15168 19473 344933 10188 IO-APIC 23-fasteoi
ehci_hcd:usb1
...
~~~
--
al3xu5
Say NO to copyright, patents, trademarks and any industrial design restrictions.
________________________________________________________________________________
Public GPG/PGP key block
ID: 4096 bit RSA key 69C5977BF94CFE23
Fingerprint: 59C6 9DC7 CD4B CF2F A190 E3DE 69C5 977B F94C FE23
I'm pleased to announce the long overdue update to MMA stable. Version
19.08 is now online and ready for your musical pursuits. Lots of new fun
things, lots of new/updated examples, lots of manual fixes and
clarifications. This is really a maintenance release fixing a number of
issues in 19.07. So, all I can add is "HAVE FUN". Get it at:
https://mellowood.ca/mma/index.html
And, don't forget to visit the new MMA blog at
https://musicalmidiaccompaniment.blogspot.com/
Have fun!
--
**** Listen to my FREE CD at http://www.mellowood.ca/music/cedars ****
Bob van der Poel ** Wynndel, British Columbia, CANADA **
EMAIL: bob(a)mellowood.ca
WWW: http://www.mellowood.ca