I installed all KDE development packages from the FC1 install CD and now I finally got rosegarden to compile from sources. I applied the patch and compiled. Unfortunately B4 still goes quiet after the first playback.
How do I ensure I did the patching right? I cd:ed to the sound directory under rosegarden and applied the patch command there. What would the right syntax be?
Why doesnt the CVS version compile while the 0.9.9 version does? Are there some new dependencies I should fulfill compared to 0.9.9.
br, Timo
..............................................................
MTV3 Laajakaista - Hauskemman elämän puolesta.
http://www.mtv3.fi/liittyma/hankinta/laajakaista/
Hi. I bought myself a new system (amd64 3500+ 1gb ram) and i was wondering
what distro should i install for the main purpose of creating music... i was
thinkin of gentoo amd64 or x86...
Hi!
The aim is to make measurement laboratory, in particular, to measure
distortions of audio amplifier. Using JACK, I can route line ins/outs, find
clean sine signal and get amplified one, and then route last to... Well,
the questions are:
- are there some graphical FFT frontend to see signal harmonics?
- has anybody success experience here?
- are there some caveats and traps in such measurement?
I have 24/96 card (Terrateck Aureon 7.1) with (as I think :-) good
DAC/ADC. So, measurements accuracy may be rather high. Is it so?
Thanks!
Andrew
dssi-vst 0.3 released!
======================
The 0.3 release of dssi-vst is now available.
dssi-vst is a DSSI plugin wrapper for VST effects and instruments
with GUI support, allowing them to be loaded into any DSSI host.
It requires a fairly recent version of Wine (this calendar year at least).
dssi-vst is available from the download page at
http://dssi.sourceforge.net/
The main improvement since the initial 0.1 release is that dssi-vst
now works correctly with plugins with complex GUIs that use
back-channel information to communicate things like patch data to
the audio plugin. In practical terms, this means that VSTs with
test keyboard widgets, patch load and save, and other natty features
in their GUIs should work properly as DSSI plugins without losing
automatability for the true automatable parameters.
After a considerable amount of work I now can use the B4 vst instrument under Linux. The setup is as follows:
Fedora Core 1 + Planet CCRMA
Wine-20041019
jack_fst-1.2 with Mark Knecht's hack for Wine-20041019
Native Instruments B4
However, when using B4 as a soft synth under Rosegarden it plays perfectly for the first playback. When I stop the sequencer and "rewind" to the beginning of the track and start playback again, B4 goes quiet.
The B4 UI still works, I can see the B4 UI keyboard moving in sync with my midi keyboard, all controls work, I can see the B4 midi and audio connections in qjcaktctl, and Rosegarden shows midi traffic on the channel assigned for B4, but there is just no sound. If I kill the B4 window and restart and reconnect it, it works again, for one playback.
I have tried reconnecting the midi and audio connections and I have set and unset the mute and bypass buttons in the VST window to no avail. B4 stays quiet until I restart it. I have tried this also without Mark Kencht's hack of jack_fst-1.2 in wine-20040505 but the behavior is the same in both cases.
Any ideas what could be wrong? B4 works perfectly for hours when using it outside the sequencer environment, but I would also like to use it in Roseqarden.
br, Timo
..............................................................
MTV3 Laajakaista - Hauskemman elämän puolesta.
http://www.mtv3.fi/liittyma/hankinta/laajakaista/
Hello
>From: Mark Knecht <markknecht(a)gmail.com>
>>may be a configuration option to not use it. Try
>
>./configure --with-dssi=OFF --prefix=/home/time/RG
>
Thanks for the tip. Unfortunately the compile still halts at the same
error, despite this change.
>From: Chris Cannam <cannam(a)all-day-breakfast.com>
>
>I don't understand the error, in fact, because configure should
>already detect
>whether dssi.h is there or not. Actually it looks for the >pkg-config
file
>(dssi.pc), so I suppose it would go wrong if that was there but
>incorrect.
>
>I do feel this route is likely to be full of annoyances.
You are not far from the truth there ;-)
I googled for the file make was complaining about and the only refrence
I found was to the Rosegarden4-debuginfo packages. Installing them did
not help either.
Any alternative solutions?
Timo
Hi all,
I'm trying to get voip in a video game (ut2004) working on my
Nforce2 chipset with Alsa. This is with the 2.6.8.R9 kernel from
Planetedge. There appears to be some software mixing support available
now with the Alsa snd_intel8x0 module as when I play the game I can hear
the games audio and my mic at the same time. Am I wrong about this? Is
there some other means by which I can hear both audio sources at the
same time? The reason I ask is because I still cannot get voip to work
even though I can hear my mic over my pc speakers. I am wondering if I
still need to use the dmix plugin in my .asoundrc file to get voip to
work as some older(?) documentation says. Can someone point me in the
right direction please.
Rick B
> From: Mark Knecht <markknecht(a)gmail.com>
> 4) make and see if it builds. This is where the dependency problems
> will show up.
>
Indeed, trying to compile the cvs version:
audiopluginoscgui.cpp:27:18: dssi.h: No such file or directory
make[3]: *** [audiopluginoscgui.o] Error 1
make[3]: Leaving directory `/home/timo/cvs/rosegarden/gui'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/timo/cvs/rosegarden/gui'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/timo/cvs/rosegarden'
make: *** [all] Error 2
[08:49 AM] localhost:~/cvs/rosegarden$
Timo
Hullo,
I'm wondering if there's a way to have the digest sent with the included
messages as attachments, instead of just one big message. Another list
I'm on does that, and it's really convienent to just hit "v" (in mutt)
and see a list of included messages to browse through. Also, then
messages already have the correct subject line when you reply to them. I
tried searching the archives, but of course, searching for "digest"
brings up a whole host of unwanted results.
Thanks,
Spencer
Hi,
maybe i'm just blindstruck or plain stupid but when i accidentally hit the
"hide" entry in the qjackctl popup menu [usually happens when i want to
reset the xrun count], there's no obvious way to make it visible again.
I figure this hiding is some "kde thing", right? Bummer, when one doesn't
run kde. Is there any other way? If not would it make sense to place the
"hide" entry at some other spot in the popup menu? The topmost is the one
which gets hit accidentally the most i figure (at least i hit it pretty
often).
flo
