Linux-audio-user

linux-audio-user@lists.linuxaudio.org

20661 discussions

by Steve Harris

http://plugin.org.uk/clockloop/ A primitive GPL'd commandline loop player. Switches between loops with MIDI program changes or note events. More info on the webpage. Its just something I knocked up ages ago, someone who is good in Pd could make something better in about ten minuites, but I needed this to have low CPU load. Hopefully it will be useful to someone. - Steve

21 years, 8 months

[linux-audio-user] running jack as non-root?

by Hasse Hagen Johansen

Hi Now googled around without results. The question is what is the recommended way to run jack and jack aware applications as a non root user. I saw something about capabilites at ccrma, but I cannot se how it is done (I know it is in the 2.4 kernels). I am running Gentoo with reiserfs, so I hope it doesn't depend on using ext2/3 extended attributes...any recommendations? Best Regards Hasse

21 years, 8 months

[linux-audio-user] config settings for 2.6.x?

by James Stone

I was just wondering if someone who is getting good performance with jack on 2.6.x could post their kernel config file here since I am getting bad levels of xruns in 2.6 where in 2.4.25 with the low latency patches applied, I get none. I am using Debian sid on an Athlon 2500+/ A7N8X-X motherboard with 512MB RAM.. SBLive! and onboard sound chip both give good performance in 2.4.25 but not with 2.6.3 James

21 years, 8 months

[linux-audio-user] Tool for noise removing

by romildo＠uber.com.br

Hello. What is the best linux tool for noise removing from audio files recorded from tape? Regards, Romildo

21 years, 8 months

[linux-audio-user] Digitech (DoD) RP-10 and Midi controlers...

by Russell Hanaghan

Has anyone ever owned a Digitech RP-10 (Guitar multi fx pedal)and have some explicit info on the midi stuff within? I'm trying to use the midi controllers on the RP-10 to control AMS reverb and delay modules that run on my PA. I want to be able to simply switch off reverb / delays between songs when I'm speaking on the mic. I can get the volume pedal on the board to show as a continuous controller and it pops up in the parameter window in AMS. But the switch pedals, although assignable to midi, dont seem to show. The manual fro the RP-10 states that the midi transmitted data will be from the pedal on Ch 1 and that the other data it sends is "program change" data. That is when you switch from one bank on the pedal to another. But it is not recognized in AMS as is the CC pedal. I'm no midi genius...I wonder what the "program change" data is and what I might use to recognize it within linux audio? R~

21 years, 8 months

[linux-audio-user] Finale+wine update

by Mikhail Ramendik

Hello, Apparently, with the native commctl and commdlg, Finale installation fails (other installers tend to fail as well). Therefore, *first* install Finale, *then* change the config file. It might be a good idea to make the changes app-specific. I'm afraid I don't have time to change this (I use Wine only for Finale). Yours, Mikhail Ramendik

21 years, 8 months

[linux-audio-user] Finale+WIne problem solved (sort of)

by Mikhail Ramendik

Hello, I have managed to start Finale 2002 under Wine with all icons displayed correctly. WARNING: I have not yet used it extensively, so I'm not sure if it is stable! (And I still have no MIDI input/output, but then I have not really tried...) To get it to work, I took the following files: commdlg.* comdlg32.* commctl.* comctl32.* from a Windows 98 (first edition) machine where Finale 2002 was already installed (and works fine). I copied them into the \windows\system\ directory in wine's fake Windows drive. I put the following in wine's config: in the [Version] section "Windows" = "win98" in the [DllOverrides] section: "commdlg" = "native" "comdlg32" = "native" "commctl" = "native" "comctl32" = "native" And, this works. I would send the Win98 files to anyone interested, except that I'm afraid there may be licensing issues (as these are a part of win98). So your safest bet is to get to a win98 box, install Finale (this is important -- apparently it updates at least COMCTL32), and then move these files onto the Linux box. I'm *not* sure it will work with files from Windows NT/2000/XP. AND: you need wine 20031212. I'm not sure about later versions (could try, perhaps - but "if it ain't broke don't fix it", so unless something is not working correctly, I won't try anytime soon). But 200308-something simply does not work (font stuff breaks). I will duplicate this on Frank's corner forums, and after some testing, submit this to the Wine HQ and Frank's Corner for inclusion in FAQs. Yours, Mikhail Ramendik

21 years, 8 months

[linux-audio-user] FINALE -

by Mark Knecht

Hi, Someone here was asking about fonts in Finale recently. FYI - There is a note on the Wine-Users list this morning from someone who says they have Finale displaying notes correctly under Wine, but are getting black icons in the app itself. Maybe the two fo you can link up and get things working better for both of you. Look at the bottom of this page: http://www.winehq.org/hypermail/wine-users/2004/03/index.html Mark

21 years, 8 months

Re: [linux-audio-user] Tool for concatening wav files?

by Kjetil Svalastog Matheussen

romildo: > > Hello. > > What tool is good at concatenating wav audio files? > Preferable command line ones. > I like this one: http://www.etse.urv.es/~dmanye/quelcom/doc/quelcom.html#wav%20tools kjetism@hensten ~ $ qwavjoin --help qwavjoin: join wav files syntax: qwavjoin [option]... file1 file2... -h, --help: show this help and exit -o, --output <file>: send output to <file>. otherwise, append to <file1> -v, --verbose: verbose -V, --version: show version and exit --

21 years, 8 months

[linux-audio-user] FINALE 2000 - WINE ???

by robcanning

hi sorry if this is slightly off-topic but to convert fully to linux audio i need to be able to use notation - i've seen some of the open source notation packages and none of them are up to the level of Finale yet. i'm trying out finale 2000 on the WINE emulator for Linux on Redhat9. I have put a copy of the maestro.ttf font into an X11 directory and pointed my .wine/config file to that directory so now i have the font showing up in finale. My problem is all the little buttons in the simple entry panel are black instead of showing up note/duration symbols - most of the other buttons in the other entry panels are showing up ok. any linux/wine/finale users out there??? are the symbols on these buttons connected to maestro.ttf? - reports of any experiences with using finale within WINE would be greatly appreciated especially with regards to getting the midi .dll side of things up and running. thanks, rob canning -- robcanning <rscanning(a)eircom.net> www.robcanning.utvinternet.com

21 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user