Hi eveyrone,
I recently had some issue concatenating audio fies of different formats (wav
and aiff), though of the same samplerate, channel-count and bit depth. It
complains about compressed aiff.
sndfile-convert can convert those files to wav easily. Is that to be expected?
Best wishes,
Jeanette
--------
When you need someone, you just turn around and I will be there <3
Hi
The first fix release of GxPlugins.lv2 is out.
The fixes are:
Fix Power switch use as bypass control (lv2:enabled)
Fix don't rebuild on make install
Fix GxVBassPreAmp dc overload in circuit simulation
Also it comes with the new GxSD1.lv2 pedal simulation.
GxPlugins.lv2 is a set of mostly analogue guitar pedal simulations as
LV2 plugins, simulated with the guitarix ampsim toolkit.
They contain the following plugs:
GxBottleRocket.lv2 - -> tube based preamp pedal
GxHotBox.lv2 - -> tube based preamp pedal
GxVBassPreAmp.lv2 - -> transistor based Bass preamp
GxSuppaToneBender.lv2 - -> transistor based Fuzz pedal
GxHyperion.lv2 - -> transistor based Fuzz pedal
GxVoodoFuzz.lv2 - -> transistor based Fuzz pedal
GxSaturator.lv2 - -> saturation plugin
GxVintageFuzzMaster.lv2 - -> transistor based Fuzz pedal
GxSuperFuzz.lv2 - -> transistor based Fuzz pedal
GxVmk2.lv2 - -> transistor based solid stage preamp
GxUVox720k.lv2 - -> transistor based solid stage preamp
GxSlowGear.lv2 - -> volume swell plugin
GxGuvnor.lv2 - -> transistor based overdrive pedal
GxToneMachine.lv2 - -> transistor based Fuzz pedal
GxSD1.lv2 - -> Op-amp based overdrive pedal
I hope they may be useful for the one or the other.
Build instruction and screenshots may be found here:
https://github.com/brummer10/GxPlugins.lv2
the release zip file is located here:
https://github.com/brummer10/GxPlugins.lv2/releases
regards
hermann
Hi everyone,
this is a script to make a dramatised reading from a plain text file, using
speech synthesizers on both Linux and MAC OS. Hear the software play it for
you. :)
https://freeshell.de/~silvain/software/story_maker-1.0rc1.tar.bz2
It works from the Linux terminal and only needs sndfile (sndfile-concat and
sndfile-convert) and optionally oggenc or lame to create a fully tagged
audiobook.
story_maker can use sapi4linux (sapilektor), espeak and festival on Linux and
the standard MAC OS voices (through say), which includes the InfoVox IVox
voices.
Features:
automatically find direct speech
interactively assign character names to direct speech passages
choose a cast of voices for your characters
save a full or partial cast and use it for other stories
automatically render on Linux and (optionally) MAC (using ssh)
optionally build a fully tagged OGG or mp3 file
I can't publicly supply my demo, since it uses proprietary voices, not meant
for published audiofiles. :( But it sounds OK. It's certainly better than
reading it at the computer scren or braille display and sounds much better
than plain old espeak. :)
I'd love to hear some feedback if you go for that crazy thing. <3
Best wishes,
Jeanette
--------
When you need someone, you just turn around and I will be there <3
Not been able to access it for at least 24 hours.
Anyone know what's the problem?
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
Hi Chris,
Are you implying that your app will restart JACK when it is the condition I
describe?
On another note:
I cloned the git repository. Confirmed the depends.
My results following the README:
sudo make PREFIX=/usr install
pandoc -f markdown -t rst README.md > README.rst
/bin/sh: 1: pandoc: not found
Makefile:10: recipe for target 'README.rst' failed
make: *** [README.rst] Error 127
Or:
sudo make install-user
python setup.py install --user
Traceback (most recent call last):
File "setup.py", line 4, in <module>
import setuptools
ImportError: No module named setuptools
Makefile:24: recipe for target 'install-user' failed
make: *** [install-user] Error 1
Thanks!
Mac
On Dec 30, 2016 08:29, Will Godfrey <willgodfrey(a)musically.me.uk> wrote:
>
> On Sun, 18 Dec 2016 15:46:34 +0000
> Will Godfrey <willgodfrey(a)musically.me.uk> wrote:
>
> > On Sun, 18 Dec 2016 22:38:31 +1100
> > Roger <gurusonic(a)gmail.com> wrote:
> >
> > > On 18/12/16 19:46, Will J Godfrey wrote:
> > > > All of this has happened since that latest fetch from debian testing :(
> > > > Maybe I'm imagining things, but we seem to be getting a lot more breakages
> > > > and general strange behaviour from debian these days.
> > > >
> > > Debian Stretch is in freeze transition preparing for next release. Soft
> > > freeze happens on 5 Jan so many packages may be pushed to beat this
> > > deadline causing testing to be at a fragile stage currently.
> > >
> > > https://www.debian.org/News/weekly/2016/04/
> > >
> > > Doesn't help fix your issue but may help explain why it happened.
> > >
> > > Roger
> >
> > Didn't think of that :(
> >
> > Thanks, I can get round things for now.
> >
>
> Hmmm, my normal state of mild confusion has now progressed to considerable
> agitation!
>
> As an experiment I tried using jackd1. Result, none of these messages. However
> debian doesn't provide headers for this so I can't compile against it.
>
> Go back to jackd2 (lot's of arsing about to do that) and once again I get a
> continuous stream of messages even when there is nothing running except
> qjackctl, so I'm wondering if the nice people at debian have inadvertently
> compiled it with a debug switch enabled.
>
> Is there such a switch, and can it be disabled without re-compiling.
>
> I generally avoid compiling low-level stuff - I don't want to end up having to
> also compile all the kit that's dependent on the debian installs.
>
> Below is a few *seconds* worth from qjackctl's message window.
>
> Jack: JackEngine::ClientNotify: no callback for notification = 4
> Jack: JackEngine::ClientNotify: no callback for notification = 4
> Jack: JackExternalClient::ClientNotify ref = 2 client = qjackctl name =
> qjackctl notify = 4 Jack: JackSocketServerChannel::Execute : fPollTable i = 2
> fd = 10 Jack: JackClient::ClientNotify ref = 2 name = qjackctl notify = 4
> Jack: JackClient::kGraphOrderCallback
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
> Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 9
> Jack: JackSocketServerChannel::Execute : fPollTable i = 2 fd = 10
FWIW, I updated to JACKD2 from testing last night. I use mplayer on command line to play through JACK. And get the same results.
David W. Jones
gnome(a)hawaii.rr.com
authenticity, honesty, community
http://dancingtreefrog.com
Hi,
I'm doing some development work, so naturally (well, maybe it;s just me...)
and occasionally I attempt to run my code before I've started JACK.
After that it can not be started until I reboot, typical error:
09:59:57.411 Could not connect to JACK server as client. - Overall
operation failed. - Unable to connect to server. Please check the messages
window for more info.
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for 4294967295,
skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for 4294967295,
skipping unlock
My question is what SHOULD i be doing in my code to prevent this?
(Obviously, I can start JACK in my code if it's not running...but, I've not
found any info on checking for JACK and starting it from python.
AND, how do, or can, I get JACK to start after this occurs without a reboot?
Regards,
Mac
Hi,
I'm new on this list so I may have missed that these questions have already
been covered,
Is anyone using the RME ExpressCard with an external ExpressCard reader. The
Sonnet technologies is reported to work by RME on Mac and Windows but I
doubt it works on Linux? My current laptop does not have an expresscard
port.
Best,
Henrik
--
View this message in context: http://linux-audio.4202.n7.nabble.com/RME-ExpressCard-tp102819.html
Sent from the linux-audio-user mailing list archive at Nabble.com.
Hi.
I won't be able to make the scheduled meeting at c-base today. If
anyone shows up, then riot (c-base member) should be available between
20:00 - 20:30 to try organize whoever comes.
Cheers.
/Daniel
