12 May
2008
12 May
'08
6:07 p.m.
Another question about impedance and guitar sounds: I have a Tascam US 122
interface with guitar (hi-z)/line(low-z) switchers on the inputs (2 ins with
preamps and 2 insert jacks) and a guitar tube amp with an effects loop
preamp out (Fender Hot Rod Deluxe).
If I use my amp's preamp to colour my tone before going to the interface,
will the signal coming from the preamp out be high impedance or low
impedance (line). Should I plug the cable into the line level input, guitar
(hi-z) input or the insert jack (since it has already been preamplified).
Would all this be worth the trouble? Will using tube preamplification change
the attainable tones?
-Chris
2008/5/12 Arda Eden <ardaeden(a)gmail.com>om>:
You're absolutely right Darren,
A DI box is a necessary device in this situation. But specially designed
cards with a direct input solves this problem also. Don't they ?
On Mon, May 12, 2008 at 8:54 PM, Darren Landrum <
darren.landrum(a)sbcglobal.net> wrote:
Blargh. Sorry about that, list. Apparently, SBC
is bog-slow at the
moment.
-- Darren
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
--
Arda EDEN
Cumhuriyet University
Faculty of Fine Arts
Department of Music Technology
Sivas/TURKEY
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user