* Michal Seta <mis(a)creazone.com> [Nov 17 02 16:23]:
I have the same problem...
Nov 15 09:35:38 komar kernel: hub.c: USB new device connect on bus1/1, assigned device
number 7
Nov 15 09:35:38 komar kernel: usb.c: USB device 7 (vend/prod 0x763/0x1001) is not claimed
by any active driver.
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Module setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb/midisport_fw: load /usr/share/usb/MidiSport2x2.ihx
for 763/1001/1 to /proc/bus/usb/001/007
Clemens, thanks for the firmware. I just got an Uno today and its now
pulsing. Now I have to see if I can make this controller do something
interesting. i actually had a little trouble. The above helped tho,
because I did not see the /proc/bus/usb... in my logs. In fact, there
was nothing there because, of course, I didnt have usbdevfs in my
kernel. So either adding that or the reboot did it. If it needs
usbdevfs, perhaps that could be included in the readme. Thanks again.
--ant