17 Nov
2015
17 Nov
'15
6:12 p.m.
From: "Chris Caudle"
<chris(a)chriscaudle.org>
Date: 11/17/15 10:21
So problem solved? Jonetsu needs to either have jackd
not touch ALSA, or
use the seq interface, then configure Bitwig to use jack audio and ALSA
MIDI.
Unfortunately the manual is only available after you
install the demo or
full application, so someone else who has Bitwig installed will have to
look through the manual to see if that is actually possible, and if so
what is Jonetsu missing to set that up properly.
I have no problem in sharing screen shots of the configure options and one or two pages of
the manual that has to do with this configuration, if needed. The options are not many
and start with a main choice: jack or ALSA. Based on that choice, other options are
shown. This means that it is not possible to configure partway this and partway that.
After choosing jack, the options are very few and none have to do with for instance,
'do not use jack MIDI'.
I did have a reply from Bitwig today with a series of steps to do and I will give it a
try.