[linux-audio-user] Problems with MIDIsport 2x2

Dear all, Having just updated my Gentoo kernel from 2.6.11 to 2.6.13 (trying to get my Novation Speedio to work - that's still WIP), I can't get my MIDIsport 2x2 to work any more. Under 2.6.11, it worked easily - I just had to fetch midisport_firmware-0.5.tar.bz2 from Sourceforge, and follow the instructions in the readme file there, which showed me how to set up the firmware loader. But I can't get this to work any longer. I can manually upload the firmware to the MIDIsport using this command: fxload -D /proc/bus/usb/XXX/YYY -I MidiSport2x2.ihx The MIDIsport then flashes its lights and changes its ID and bus address ("renumerates", in the wonderful jargon), but doesn't pick up its driver - here's the relevant section from /proc/bus/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 14 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0763 ProdID=1002 Rev= 1.21 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I have put an entry in /etc/hotplug/usb.usermap, pointing to the script (midisport_fw) that's supposed to load the firmware, but no messages appear in the log, suggesting that the script is not getting run. What's going wrong? Why is this not working now, when it was childsplay before? Any help appreciated, Peter C