18 Sep
2021
18 Sep
'21
7:51 p.m.
I have been using carla with various software synths for s long time both
at home and live.
I have been using midi keyboards that has been easy to change midi channel
so my setup was aimed to change active synths based on midi channel.
In carla I route my keyboard or keyboards to midi filter and connect my
softsynths to one of the 16 outputs. If needed I chain the synths to
compressors or other plugins and route them to a physical output.
My regular setup consist of SetBfree on midi ch 1
Pianoteq on ch 2
Various U-he synths on ch 3 to 9
And a few sample libraries above that.
Some routes includes more than one synth and if needed the setup can filter
midi on note number as well and by so having layers and splits..
The downside with my setup is that it is aimed at maximum 16 sounds bit
that can be worked around by using program changes to expand. I could send
pgm changes to Pianoteq to change presets and the same goes for other
synths.
By using carla and all available midi filters there are no limitations
other than the imagination.
Regard Anders Hellquist
On Fri, Sep 17, 2021, 23:42 Gerhard Wolfstieg <gw(a)wolfstieg.com> wrote:
Hi Gerhard, hi all together!
On Fri, 17 Sep 2021 20:35:56 +0200
Gerhard Zintel <gerhard.zintel(a)web.de> schrieb:
Feel free to ask further questions if you decide
to try that route.
Gerhard
Thank you very much for your helpful and quick answer. Now I have to
check all out and perhaps / likely I’ll come back with more questions
or a report of what I have done in some days or weeks.
Grüße, Gerhard
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user