25 Dec
2017
25 Dec
'17
4:06 p.m.
Hi
No periodic clicks so far. Have been using the Ultralite almost every day
for a few months (I have two of them but rarely use the other one). The
only glitch so far are a few times where the sound has been a bit strange
like distorted in the top of the frequencies. Kind of bit crushed low
resolution effecting the top end only. That has gone away by just stop jack
(using cadence) and starting it again. I use my card set to internal clock
source and no connected AVB or adat devices by the way.
Regards, Anders
On Dec 25, 2017 2:45 PM, "georgnk" <georg_nik(a)yahoo.gr> wrote:
Hi that's interesting.
I couldn't downgrade so I haven't tried older firmware.
Maybe I need to contact tech support.
By the way, I am curious if the ultralite avb has also these periodic
clicks
I described before. Thanks.
Anders Hellquist wrote
Hi!
I have the Ultralite AVB and have downgraded my card as per
recommendations
from Motu tech support. The reason for me was to be able to use more than
24ch stream in CC more from my computer. That option is removed on later
firmware. The latest public beta firmware which probably is available for
624 has a very nice touch console. (Mixer made for touch based surfaces
that will be a nice addition)
My understanding is that you should be able to downgrade as you please
but
I can not guarantee anything. Tech support is
great and will probably
respond quickly even if "Operating system = Other"
/Anders
On Dec 21, 2017 2:36 PM, "georgnk" <
georg_nik@
> wrote:
> Hello,
> When I tried to upload the file with older firmwares I couldn't. The
> warning
> was that I was trying to upload an out of dated firmware. Is there any
> way
> to downgrade?
>
> For sure the web interface using windows Os doesn't show something new
> such
> as bios menu...Except I am blind
>
> Cheers
>
> list-2 wrote
> > Hello.
> >
> > i still use an old firmware. As i do not really trust - yet - MOTU
> with
> > Gnu/Linux.
> >
> > Keep in mind that if this AVB series products work under Gnu/Linux, i
> > think it's more a side effect from USB audio Class compliant than a
> real
> > desire from MOTU (it has to work for Apple/Ipad).
> >
> > As this new v1.3.2+102 firmware shows that you have nothing new in the
> > web interface ( no bios menu added with other options ? ) it may do
> > something for Windows/Apple Os's users ?!
> >
> >
> >
> > On 2017-12-21 02:35, georgnk wrote:
> >> Hi.
> >> Yes the firmware is v1.3.2+102 (520 is for the avb)
> >> I don't know either what the bios menu is doing. I can only find bios
> >> if I
> >> press the select button from my interface and shows some info,nothing
> >> more.
> >>
> >> If you test it one day please let me know if you also have this
> (minor)
> >> issue.
> >>
> >> Have nice holidays. Cheers!
> >>
> >>
> >>
> >>
> >> list-2 wrote
> >>> Hello.
> >>>
> >>> I am away from my computer with the MOTU 624 AVB for the holidays.
> >>> I'll
> >>> make a try when i'll be back.
> >>>
> >>> But i've just checked the firmware pages of MOTU's web site and
:
> >>>
> >>> v1.3.2+520 (Release Date 2017-12-13)
> >>>
> >>> A new one as been added few days ago. I've never tried this one.
> >>> Is the the firmware you running your card with ?
> >>>
> >>> The change log says :
> >>>
> >>> Added Bios menu
> >>>
> >>> Hmm i'm really wonder what it does, and if it break anything with
> >>> Gnu/Linux Os.
> >>>
> >>> Cheers !
> >>>
> >>>
> >>>
> >>> On 2017-12-20 02:41, georgnk wrote:
> >>>> Hello thank you for the reply.
> >>>> The clicks are periodic.well,not strictly periodic but almost every
> >>>> two
> >>>> seconds. I have tried your suggestions but didn't change
something.
> >>>>
> >>>> What I have also discovered is that the clicks are not passing
> >>>> through
> >>>> my
> >>>> software. Testing a sine wave and using a spectrum analysis in real
> >>>> time,
> >>>> sndpeek, clicks don't show up there. It seems they are coming
> >>>> directly
> >>>> to my
> >>>> monitors (headphones)
> >>>>
> >>>> Thanks a lot
> >>>>
> >>>>
> >>>> Len Ovens wrote
> >>>>> On Mon, 18 Dec 2017, georgnk wrote:
> >>>>>
> >>>>>> I can also select my sound card without qjackctl and Jackd.
> >>>>>> Pure data can see my input s and outputs directly. Then I go
audio
> >>>>>> test
> >>>>>> play
> >>>>>> the sine wave , wait a while, I move frequency up and
down,clicks
> >>>>>> start
> >>>>>> and
> >>>>>> never stop.
> >>>>>
> >>>>> If these are random clicks, that sounds like sync issues. Some
> >>>>> things
> >>>>> to
> >>>>> try:
> >>>>> - set pulse default and alternate sample rate to 48000
> >>>>> - turn off HDA audio either in bios or in pulse:
> >>>>> pactl unload-module module-udev-detect
> >>>>> pactl unload-module module-alsa-card
> >>>>> (note that if pulse can see any audio card directly,
> >>>>> it may choose to sync from that one even if you are
> >>>>> not using it)
> >>>>> - try different sample rates, in particular both 44100 and
> >>>>> 48000. It may be that alsa is under the impression
> >>>>> it can set sample rate when that is not the case.
> >>>>>
> >>>>> I have not seen in this thread any meantion of the web
interface
> >>>>> that
> >>>>> the
> >>>>> motu AVB series interfaces normally have, so I am guessing this
is
> >>>>> not
> >>>>> one
> >>>>> of these boxes. Motu's support in the past with Linux has
be
> >>>>> notoriously
> >>>>> bad until the AVB series, so you may have something that will
not
> >>>>> work
> >>>>> with Linux properly... as in, it is USB2.0 compliant so far as
> sound
> >>>>> transfer is concerned, but expects a provided blob to do device
> >>>>> setup.
> >>>>> The
> >>>>> AVB series uses a web based setup tool that is OS agnostic.
> >>>>>
> >>>>> --
> >>>>> Len Ovens
> >>>>> www.ovenwerks.net
> >>>>>
> >>>>> _______________________________________________
> >>>>> Linux-audio-user mailing list
> >>>>
> >>>>> Linux-audio-user@.linuxaudio
> >>>>
> >>>>> https://lists.linuxaudio.org/listinfo/linux-audio-user
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> Sent from:
> >>>> http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
> >>>> _______________________________________________
> >>>> Linux-audio-user mailing list
> >>>>
> >>
> >>> Linux-audio-user@.linuxaudio
> >>
> >>>> https://lists.linuxaudio.org/listinfo/linux-audio-user
> >>> _______________________________________________
> >>> Linux-audio-user mailing list
> >>
> >>> Linux-audio-user@.linuxaudio
> >>
> >>> https://lists.linuxaudio.org/listinfo/linux-audio-user
> >>
> >>
> >>
> >>
> >>
> >> --
> >> Sent from:
> >> http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
> >> _______________________________________________
> >> Linux-audio-user mailing list
> >>
>
>
f5.html
Linux-audio-user@.linuxaudio
>
> >> https://lists.linuxaudio.org/listinfo/linux-audio-user
> > _______________________________________________
> > Linux-audio-user mailing list
>
> Linux-audio-user@.linuxaudio
>
>>
>
>
>
>
> --
> Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user- >
_______________________________________________
> Linux-audio-user mailing list
>
Linux-audio-user@.linuxaudio
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@.linuxaudio
--
Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user