10 Jan
2019
10 Jan
'19
4:14 a.m.
Hey, me again. Back at it ... same problems :) But, I _think_ I figured out
the problem ... it's the USB port. If I use the "easy to get at port",
I'm
using a USB3, and it creates the problem. If I use a harder to reach port,
USB2, all works fine. Don't need to use pasuspender, don't need to turn off
pulse audio ports, etc. Just run audacity and it all works.
To recap, I'm using a Presonus Audiobox USB connected to my PC and running
Audacity to do some simple recording. The USB3 port gives me scrambled
recordings ... the USB2 port works fine.
So, do I have a bum port or is this normal?
On Thu, Dec 20, 2018 at 8:18 PM Bob van der Poel <bob(a)mellowood.ca> wrote:
That is strange that modifying the PulseAudio settings first makes a
I sort of figured that.
Or did you mean you wanted to change the gain of the recorded track after
--
**** Listen to my FREE CD at http://www.mellowood.ca/music/cedars ****
Bob van der Poel ** Wynndel, British Columbia, CANADA **
EMAIL: bob(a)mellowood.ca
WWW: http://www.mellowood.ca
difference.
All I have to go on is the man page for pasuspender, which states:
"pasuspender will suspend access to the audio devices"
Good to know that you figured out how to work around it.
Not saying that one really needs to do this ... just that it worked for me
today. I've not had a chance to try it a 2nd time, as they say "'tis the
season to be weary", but I will next week when things settle down a bit.
Only one
more issue is that I can't adjust the gain in audacity for the
mic.
The interface only has hardware knobs to control gain, Audacity will not
be able to change the gain of the mic preamp.
recording?
That's easy to do and works fine.
I don't recall if you mentioned what type of mic you use, the Audiobox
only has a maximum gain of 35dB. Should be more
than enough for close
position on instruments with a condenser mic, would not be enough to
record a small chamber group from mid auditorium with ribbon mics. For a
mic relatively closely positioned to your saxophone that should be enough
gain available.
I was doing my testing with a cheap dynamic. I'll have a go later with a
condenser. I will want to use my ribbon for sax recording, but at a close
distance. So, it should be fine. And, if not, I can always stick an amp
(well, mixer) into the loop.
The instrument input actually has more gain available, up to 50dB, so
depending on what you need using the unbalanced
input might work better.
That's interesting. I have a 3pin to 1/4 cable laying about. I'll give
that a go and see what happens. Would this effect the quality of the signal?
So much easier, for an acoustic guy like me, to not get involved in all
this recording stuff :)
--
**** Listen to my FREE CD at http://www.mellowood.ca/music/cedars ****
Bob van der Poel ** Wynndel, British Columbia, CANADA **
EMAIL: bob(a)mellowood.ca
WWW: http://www.mellowood.ca