8 Feb
2010
8 Feb
'10
10:27 p.m.
Did you do the step to fix the udev rules step?
$ sudo nano /etc/udev/rules.d/42-madfuload.rules
Comment or delete it all out and put in this line:
ACTION=="add", SUBSYSTEM=="usb", SYSFS{idVendor}=="0763",
SYSFS{idProduct}=="2808", RUN+="/usr/local/sbin/madfuload -l -3 -f
/usr/local/share/usb/maudio/ma008100.bin -D $env{DEVNAME}"
-Brian
On 2/8/10 5:47 PM, Antonio Russo wrote:
Hi,
thanks for your answers!
first I tried the steps indicated by Brian in the blog:
$ sudo apt-get update
$ sudo apt-get install madfuload
sudo /etc/init.d/udev restart (it doesn't works may be because I'm
using ubuntu 9.10 but I executed sudo service udev restart)
The Ozone was plug in and power on
$ dmesg |tail
I don't see the line "usbcore: registered new interface driver
snd-usb-audio", this is what I have
[ 734.540734] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 734.540739] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2028.689627] udev: starting version 147
[ 2125.877654] udev: starting version 147
[ 2191.261798] udev: starting version 147
[ 2206.913521] udev: starting version 147
[ 2211.761776] udev: starting version 147
[ 2221.504031] usb 2-1: USB disconnect, address 3
[ 2262.168058] usb 2-1: new full speed USB device using uhci_hcd and
address 4
[ 2262.327285] usb 2-1: configuration #1 chosen from 1 choice
$ aplay -l
**** Lista de PLAYBACK Dispositivos Hardware ****
tarjeta 0: Intel [HDA Intel], dispositivo 0: ALC888 Analog [ALC888 Analog]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 0: Intel [HDA Intel], dispositivo 1: ALC888 Digital [ALC888
Digital]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
just appear the Intel card (actually it is the audio coming with the
motherboard) and the Ozone still refuse to be subdue :-)
After all I tried with the Bengt solution:
$ sudo /et/init.d/hal restart (in ubuntu 9.10 sudo restart hal)
and nothing, could be I omitted some step or may be I have to do
something more...I really would appreciate your help about it.
Regards
Russo
2010/1/24 Jostein Chr. Andersen <jostein(a)vait.se <mailto:jostein@vait.se>>
söndag januari 24 2010 09.52.07 skrev Bengt Gördén:
...
It might be enough just to restart the hal
system.
sudo /et/init.d/hal restart
You're right, and here is the Fedora 10 version:
/etc/init.d/haldaemon restart
Works like a charm. :-)
Thanks! Jostein
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
<mailto:Linux-audio-user@lists.linuxaudio.org>
http://lists.linuxaudio.org/listinfo/linux-audio-user
--
Russo
http://www.bitacoradelrusso.blogspot.com
Recicla, Reduce, Reutiliza
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user