1 Apr
2016
1 Apr
'16
12:24 p.m.
OK, got it working, used .~/asoundrc
pcm_slave.sl3 {
pcm "plughw:1,0"
channels 2
rate 44100
}
pcm.complex_convert {
type plug
format S16_LE
slave sl3
}
And the darkice.cfg input section is
[input]
device = plughw:1,0 # Alsa soundcard device for the
audio input (barenger)
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or
44100
bitsPerSample = 16
channel = 2 # channels. 1 = mono, 2 = stereo
Ben
On 01/04/2016 11:03, Niels Dettenbach wrote:
Am Freitag, 1. April 2016, 10:53:03 schrieb Ben
Edwards:
--
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.
OK, just tried that
...i've figured
out that we have a few 24bit consumer interfaces (USB) too
running with darkice.
so it *should* work...
could you try pls:
device = plughw:0
or
device = plughw:1
instead?
I had to use this instead of the
device = hw:0,0
If that did not help, i would try to disable realtime for first until it is
working (just as a shot)...
hth