12 Jun
2008
12 Jun
'08
4:58 a.m.
ons, 11 06 2008 kl. 18:50 -0700, skrev Ken Restivo:
It's been many years since I had one, so I
don't remember exactly. But once I got into the BIOS screen, it was there. Figuring
out what setting did what, exactly, was a matter of experimentation, IIRC. At the time I
wasn't doing audio so I didn't spend much time on it-- just enough to see that the
settings were there.
Ok I'm begining to be a little happy :) I'ts down to one usb port
sharing with the hdsp. I manage to get the latency under 3ms which I
find farily good, I made a little script from documentation I found on
the net, and placed it in my rc system:
SCRIPT START
#/bin/sh
#set -v
#script for tuning latency under Linux
#Setting what soundcard you want to work on
#export card="RME"
#Find your soundcards place on the PCI bus and put it in a variable
export Sound_Card_ID=`lspci|grep "RME"|cut -d ' ' -f1`
#allowing medio long bursts for all PCI devices
setpci -v -d *:* latency_timer=b0
#..then maximize latency timers for audio
setpci -v -s $Sound_Card_ID latency_timer=ff
SCRIPT END
Then i got this result, which you can se here:
http://imageload.dk/files/73d5ce5180b5899650de9423e2bfba4c.jpg
But is it possible to get ZynAddSubFX to run lower as the 5.3ms internal
latency ?
I don't know if thats an issue, but if I load tons of tones on the
keyboad the sound getting noisy but there are no X-runs, and playing
together with Hydrogen the drum sound don't seem to be affected from the
noisy sound from ZyndAddSubFX.
/Sv-e
