11 Dec
2014
11 Dec
'14
11:05 p.m.
On Thu, 11 Dec 2014 21:20:02 +0000, Fons Adriaensen wrote:
Regarding the AIO: if only two ADAT ports show up in
Jack that
has nothing to do with the mixer. Why that problem still exists
after more than three years is another matter, I for sure don't
understand why that should be so.
That's right.
However, off-list I'll send a config to Francois.
First off all, for testing purpose use the analog outputs with ALSA.
Ensure that the card will be hw:0, the default device. Make it the
first entry for "options snd slots=" in /etc/modprobe.d/alsa-base.conf.
[rocketmouse@archlinux ~]$ cat /etc/modprobe.d/alsa-base.conf
# ALSA module ordering
options snd slots=snd_hdspm,snd_ice1712,snd_ice1712
After that reboot.
Launch hdspmixer, the card should appear as card:0.
[rocketmouse@archlinux ~]$ hdspmixer
HDSPMixer 1.11 - Copyright (C) 2003 Thomas Charbonnel
<thomas(a)undata.org>
This program comes with ABSOLUTELY NO WARRANTY
HDSPMixer is free software, see the file COPYING for details
Looking for RME cards:
Card 0: RME AIO S/N 0x579bcc at 0xfddf0000, irq 18
RME AIO found!
Card 1: TerraTec EWX24/96 at 0xbf00, irq 20
Card 2: TerraTec EWX24/96 at 0xbb00, irq 21
1 RME cards card found.
Restoring last presets used
Then to load the file in hdspmixer click File > Open preset file
Load the file demo.1.mix I sent off-list.
With Firefox open https://www.youtube.com/watch?v=9irsg1vBmq0
You should get sound by the analog line outs and by the phones out.
Regards,
Ralf
--
"Pull a Homer -- to succeed despite idiocy." - The Simpsons