On Fri, Feb 25, 2005 at 11:07:33 -0500, Lee Revell
On Fri, 2005-02-25 at 09:48 -0500, Timothy Alan
Just wondering if anyone has ever used a dds2 or
3 drive for audio dat...
is there any software available to do this? I have a drive and would
like to try it.
I tried this once and it didn't work. But I didn't try very hard. IIRC
some drives can do it, some can't.
Thats right, also, some OSs, I'm not sure its ever been possible on linux,
but it was on IRIX.
Yes, I've done this on Linux before. You have to have a drive that has
audio-capable firmware. See here:
I used read_dat to dump a DAT monitor tape from each of two concerts my
band played. My drive is a:
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: ARCHIVE Model: Python 01931-XXX Rev: 5AC
Type: Sequential-Access ANSI SCSI revision: 02
Ryan Underwood, <nemesis(a)icequake.net>