6 Apr
2008
6 Apr
'08
11:24 a.m.
I forgot to precise that my sound card is a Presonus Firebox and run with
Freebob.
I got the idea to test with my U-control Uca202 (Behringer) Usb sound-card,
and there is no problems. The cpu percent is quite stable around 2,1%.
It is a bit strange because I got the rtirq script congiured for my firewire
card. So it should not work better than my firewire ...
I am a bit lost !! :O[
2008/4/6, Mysth-R <mysthr21(a)gmail.com>om>:
Hi, and thank you for your answer.
I am actually trying qjackctl 0.2.23 and the problem is the same. So it
should not be a QT problem.
Anyway, I can note that for the same qjackctl config the cpu load percent
is lower on version 0.2.23 (~= 2.5 - 3%) than on the 0.3.2 version (3 -
4.5%).
If someone has anonther Idea ... :)
Cheers,
Mysth-R
2008/4/5, Russell Hanaghan <hanaghan(a)starband.net>et>:
--
*
***************************************************************************************
* {^_^} Mysth-R {^_^}
* <= Aide Auditive =>
*
* http://myspace.com/mysthr
* http://myspace.com/aideauditive
* http://mysthr.free.fr/Joomla => Site dédié à l'audio sous
Fedora/PlanetCCRMA.
*
***************************************************************************************
Sounds similar to the issue I spoke of here a week ago.
If its the latest Qjackctl built with QT4, its a QT4 problem of yet
to be defined origin. Only difference I had, going by your description,
was that
My CPU was running at 99% and staying there.
If you run jack from the command line and see normal Cpu, this
would point to the same problem.
I have not yeilded a root cause from my Googling. Only some
similar instances from other users, not only with Qjackctl & Qsynth,
but also Skype and others built with QT4.
My fix for now was to revert to an older version of qjackctl.
Thanks!
On Apr 5, 2008, at 10:26 AM, Mysth-R <mysthr21(a)gmail.com> wrote:
Hello list,
Since I have installed Gentoo I got some issue with JACK. I am using
Jackdmp
When I run qjackctl all is right but the CPU percent, in spite of
staying around 3 or 4% it is moving : 4% then 3 %, then it passes to 27%
then 10% and 53% and 4% ...
I don't understand very well what it is going wrong.
My config : gentoo 64 bits version on a Dell Insprion 9400 Intel Core
Duo 2 T7200 with 2 Go Ram.
Firstly I had installed jack 0.109 and the issue was worse that jackdmp
:sometimes CPU load until 80%
The kernel I use was compiled by my own. Perhpas I forgot an option or
something...
uname -a :
2.6.24-rt1 #4 SMP PREEMPT RT Sun Mar 16 21:42:41:CET 2008 x86_64 Intel(R) Core(TM)2 CPU
T7200 @ 2.00GHz GenuineIntel GNU/Linux
Thank you very much for your help.
Cheers,
Mysth-R
--
*
***************************************************************************************
* {^_^} Mysth-R {^_^}
* <= Aide Auditive =>
*
* <http://myspace.com/mysthr>http://myspace.com/mysthr
* <http://myspace.com/aideauditive>http://myspace.com/aideauditive
* <http://mysthr.free.fr/Joomla>http://mysthr.free.fr/Joomla => Site
dédié à l'audio sous Fedora/PlanetCCRMA.
*
***************************************************************************************
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
--
*
***************************************************************************************
* {^_^} Mysth-R {^_^}
* <= Aide Auditive =>
*
* http://myspace.com/mysthr
* http://myspace.com/aideauditive
* http://mysthr.free.fr/Joomla => Site dédié à l'audio sous
Fedora/PlanetCCRMA.
*
***************************************************************************************