Re: [LAU] re Zoom R16

Man, I wish recompiling didn't take so darn long! Maybe someone can save me some time... I am trying to figure out the correct parameters to update the quirks-table.h file. I believe that the endpoint we are after for playback is EP 3 OUT, and this is the output of lsusb-v for that section: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x006c 1x 108 bytes bInterval 1 The endpoint address is obviously 0x03, and I have transfered that to the table. My problem seems to be with entering the bmAttributes value into the .ep_attr section for the quirks-table.h file. Is ALSA expecting a hex type value for ep_attr? The R16 seems to have an integer (9) whereas every other device I have plugged in as a hex value for bmAttributes. First attempt failed, I compiled with the integer "9" in ep_attr. Any insight would be appreciated since it takes many hours just to test out a single change. One thought I had was to just use 0x09 even though that is not the actual hex value of bmAttributes... but that's a pure guess. -- View this message in context: http://linux-audio.4202.n7.nabble.com/re-Zoom-R16-tp87487p87971.html Sent from the linux-audio-user mailing list archive at Nabble.com.