25 Mar
2003
25 Mar
'03
2:27 a.m.
On Monday 24 March 2003 23:22, D R Holsbeck wrote:
Try this. Pop out the card, start a terminal window,
do "tail -f
/var/log/(syslog for Debian boxes, or messages for redhat based systems)
What do you see? Do the CS services say that it found a card? Does it
recognize it?
I see nothing. I can pull and push the card as I like
and... nothing.
____
While at it, I took a look at the kernel startup (selected messages):
Mar 25 08:56:43 kiertotahti pcmcia: Starting PCMCIA services:
Mar 25 08:56:43 kiertotahti pcmcia: modules
Mar 25 08:56:43 kiertotahti pcmcia: cardmgr.
Mar 25 08:56:43 kiertotahti cardmgr[547]: starting, version is 3.1.31
Mar 25 08:56:43 kiertotahti rc: Starting pcmcia: succeeded
Mar 25 08:56:43 kiertotahti cardmgr[547]: config error, file 'config' line
1059: syntax error
Mar 25 08:56:43 kiertotahti cardmgr[547]: config error, file 'config' line
2135: no function bindings
Mar 25 08:56:44 kiertotahti cardmgr[547]: watching 1 sockets
Mar 25 08:56:44 kiertotahti cardmgr[547]: Card Services release does not match
Seems to me that something is starting up with a bit of coughing.
(RME cardbus was inserted while these were generated.
Don't know if there's a difference)
____
Also, I don't know if it matters, but my kernel (2.4.19) is lowlat patched
and has acpi (no patches) compiled in.
Also quadruple check your firewire cable between the Multiface box and
the pcmcia card. My digi face will exhbit the same behaviour
when I forget to plug the cable in.
Cable seems allright by eye.
--
Jaakko Prättälä
Jaakko.Prattala(a)Helsinki.FI