7 Dec
2015
7 Dec
'15
1:03 p.m.
Hi List,
In december, a few net-friends of mine have a tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Anyways, they are calling for contribution. If you fancy making
electronic acid music, in the line of Phuture's "Acid Track", then
please participate to this delicious library of freedom music :)
http://acid.datapop.se
Send your tracks to: acid(a)datapop.se, please to be mp3 + pic
Let's build the freshest acid lib together for this years NYE party!!!
Yours,
--
Set Sakrecoer
11 Dec
11 Dec
12:32 p.m.
NICE one Louigi!!!!!!!! :) What software (if any) did you use? :)
--
Set Sakrecoer
2:19 p.m.
Thanks!
So, the story for this one is kinda funny. I initially wanted to use
VB-303, which is admittedly the best TB-303 emulator out there.
Unfortunately, it does not work for me that well - it can play existing
patterns, but I seem to be unable to write notes into it.
The rest of the popular TB-303 clones I like less. I tried Muon Tau, but
nah. And eventually I went with Nekobee, hehe )
So, the base drum and Nekobee (TB-303) line is recorded on Linux Audio with
seq24, Rakarrack and Qtractor.
The rest was then done in FLStudio 12 running on WINE.
I will try to submit at least one more tune to this. Great initiative, I am
very happy to take part!
On Fri, Dec 11, 2015 at 12:32 PM, set <public(a)sakrecoer.com> wrote:
NICE one Louigi!!!!!!!! :) What software (if any) did
you use? :)
--
Set Sakrecoer
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
--
Louigi Verona
http://www.louigiverona.com/
3:25 p.m.
On 2015-12-11 14:19, Louigi Verona wrote:
Thanks!
So, the story for this one is kinda funny. I initially wanted to use
VB-303, which is admittedly the best TB-303 emulator out there.
Unfortunately, it does not work for me that well - it can play existing
patterns, but I seem to be unable to write notes into it.
The rest of the popular TB-303 clones I like less. I tried Muon Tau, but
nah. And eventually I went with Nekobee, hehe )
So, the base drum and Nekobee (TB-303) line is recorded on Linux Audio
with seq24, Rakarrack and Qtractor.
The rest was then done in FLStudio 12 running on WINE.
I will try to submit at least one more tune to this. Great initiative, I
am very happy to take part!
Interesting!! Thanks for the info! I didn't know about nakobee!!! Looks
amazing!
It is not my initiative, but i know the people behind it. And they were
very happy to receive your contribution! :)
Looking forward to hear the next banger!
Yours,
--
Set Sakrecoer AKA Uncle Flying Linux
12 Dec
12 Dec
1:20 a.m.
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi Set,
http://acid.datapop.se
Send your tracks to: acid(a)datapop.se, please to be mp3 + pic
Let's build the freshest acid lib together for this years NYE party!!!
I like the second track from top by Angry Smile, but then I haven't
listened to much yet. 'The Variable Man' is also quite nice. I'll try
to make one, no promise though.
4:13 p.m.
I sent one more. This time made it with VB-303
<http://antonsavov.net/cms/projects/venom-vb-303.html>, but then used
Qtractor and Carla to add sounds and stuff. When it comes out it is called
"Eternity".
On Sun, Dec 13, 2015 at 4:11 PM, set <public(a)sakrecoer.com> wrote:
On 2015-12-12 01:20, jonetsu(a)teksavvy.com wrote:
--
Louigi Verona
http://www.louigiverona.com/
I'll try
to make one, no promise though.
That would be soooooo nice!!! :D No need to promise, but be sure it
would make many happy humans and robots out there!!
--
Set Sakrecoer
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
4:25 p.m.
On 2015-12-13 16:13, Louigi Verona wrote:
I sent one more. This time made it with VB-303
<http://antonsavov.net/cms/projects/venom-vb-303.html>, but then used
Qtractor and Carla to add sounds and stuff. When it comes out it is
called "Eternity".
CANT WAIT!!!!!! :D
This thing is so exciting! I feel like when i was a kid and had those
calendars with small paper windows to open each day!
Today it seems like santa is hangover... but i'm sure something will pop
up any moment!
Here is the RSS for those of you impatient like me :)
http://acid.datapop.se/rss2/
--
Set Sakrecoer
4:40 p.m.
I heard it was done last year too? Are there any archives?
On Sun, Dec 13, 2015 at 4:25 PM, set <public(a)sakrecoer.com> wrote:
On 2015-12-13 16:13, Louigi Verona wrote:
--
Louigi Verona
http://www.louigiverona.com/
I sent one more. This time made it with VB-303
<http://antonsavov.net/cms/projects/venom-vb-303.html>, but then used
Qtractor and Carla to add sounds and stuff. When it comes out it is
called "Eternity".
CANT WAIT!!!!!! :D
This thing is so exciting! I feel like when i was a kid and had those
calendars with small paper windows to open each day!
Today it seems like santa is hangover... but i'm sure something will pop
up any moment!
Here is the RSS for those of you impatient like me :)
http://acid.datapop.se/rss2/
--
Set Sakrecoer
4:48 p.m.
On 2015-12-13 16:40, Louigi Verona wrote:
I heard it was done last year too? Are there any
archives?
Sure!
It was originally imagined and curated by http://devsound.se
http://devsound.se/2011/acid-december
http://devsound.se/2012/acid-december-2012
http://devsound.se/2013/acid-december-2013
http://devsound.se/acid2014/
I'm not sure why they don't curate it this year, but i think it is lack
of time. I know for sure that they were happy its taking place this year
too :)
*Set
PS. i realize my claims that it has been going on until march was wildly
exaggerated :D
--
Set Sakrecoer
18 Dec
18 Dec
1:25 a.m.
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi,
In december, a few net-friends of mine have a
tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Which tools are used to establish the repetitive events ? I'm
curious. What kind of sequencer ? What is the typical software
wiring ? I could see maybe Seq24. Would be maybe nice to
sync to an arpeggiator also. Then everything goes in Ardour. Do you
think it is possible to use an Ardour MIDI track for the foundation ?
Maybe copy/paste all along.
Cheers.
12:50 p.m.
On 2015-12-18 01:24, jonetsu(a)teksavvy.com wrote:
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi,
Hi!
I can't see why an ardour midi track wouldn't work.... SEQ24 is probably
very suited as well....
I use only hardware synths... the 303 sound is a XOX-box... I record the
audio-output in ardour... But Luigi Verona is DA MAN of the question,
lets hope he answers!!!! At least he contributed with Deliiiiicious
tracks! <3
... it's been awfully quite the pat 4 days.... :( Let's hope Santa gets
back on track soon......
--
Set Sakrecoer
In december, a few net-friends of mine have a
tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Which tools are used to establish the repetitive events ? I'm
curious. What kind of sequencer ? What is the typical software
wiring ? I could see maybe Seq24. Would be maybe nice to
sync to an arpeggiator also. Then everything goes in Ardour. Do you
think it is possible to use an Ardour MIDI track for the foundation ?
Maybe copy/paste all along.
Cheers.
2:36 p.m.
Hey jonetsu!
On Linux I used seq24 and Nekobee in Carla. I think you can also use
QMidiArp, that should be no problem. If you want to run VB-303 in a VST
wrapper of sorts, which I understand are available for a strictly Linux
environment, then you do not need a sequencer, since VB-303 has an in-built
sequencer (just like TB-303 does).
On Fri, Dec 18, 2015 at 1:24 AM, jonetsu(a)teksavvy.com <jonetsu(a)teksavvy.com>
wrote:
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi,
--
Louigi Verona
http://www.louigiverona.com/
In december, a few net-friends of mine have a
tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Which tools are used to establish the repetitive events ? I'm
curious. What kind of sequencer ? What is the typical software
wiring ? I could see maybe Seq24. Would be maybe nice to
sync to an arpeggiator also. Then everything goes in Ardour. Do you
think it is possible to use an Ardour MIDI track for the foundation ?
Maybe copy/paste all along.
Cheers.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
5:39 p.m.
Hi Louigi,
Sometimes I have the impression that there is a fair amount of Windows plugins that can be
run in Linux. But there are many recipes out there, some of them not valid anymore. Do
you run the VB-303 in Linux and if so, how do you do it ?
Cheers.
-----Original Message-----
From: "Louigi Verona" <louigi.verona(a)gmail.com>
To: jonetsu(a)teksavvy.com
Cc: "A list for linux audio users"
<linux-audio-user(a)lists.linuxaudio.org>
Date: 12/18/15 08:37
Subject: Re: [LAU] [slightly OT] Call for contribution to ACID december 2015
Hey jonetsu!
On Linux I used seq24 and Nekobee in Carla. I think you can also use QMidiArp, that should
be no problem. If you want to run VB-303 in a VST wrapper of sorts, which I understand are
available for a strictly Linux environment, then you do not need a sequencer, since VB-303
has an in-built sequencer (just like TB-303 does).
On Fri, Dec 18, 2015 at 1:24 AM, jonetsu(a)teksavvy.com <jonetsu(a)teksavvy.com> wrote:
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi,
In december, a few net-friends of mine have a
tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Which tools are used to establish the repetitive events ? I'm
curious. What kind of sequencer ? What is the typical software
wiring ? I could see maybe Seq24. Would be maybe nice to
sync to an arpeggiator also. Then everything goes in Ardour. Do you
think it is possible to use an Ardour MIDI track for the foundation ?
Maybe copy/paste all along.
Cheers.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
--
Louigi Verona
http://www.louigiverona.com/
6:13 p.m.
I am running it within FL Studio, which nowadays runs very well under WINE.
Before that I used Festige to run plugins and it sort of worked for many of
them. But I did not try VB-303 through Festige. I think Festige has been
replaced with Carla, I think you can run VSTs from Carla, but I am not
entirely sure.
On Fri, Dec 18, 2015 at 5:40 PM, jonetsu <jonetsu(a)teksavvy.com> wrote:
Hi Louigi,
Sometimes I have the impression that there is a fair amount of Windows
plugins that can be run in Linux. But there are many recipes out there,
some of them not valid anymore. Do you run the VB-303 in Linux and if so,
how do you do it ?
Cheers.
------------------------------
-----Original Message-----
From: "Louigi Verona" <louigi.verona(a)gmail.com>
To: jonetsu(a)teksavvy.com
Cc: "A list for linux audio users"
<linux-audio-user(a)lists.linuxaudio.org>
Date: 12/18/15 08:37
Subject: Re: [LAU] [slightly OT] Call for contribution to ACID december
2015
Hey jonetsu!
On Linux I used seq24 and Nekobee in Carla. I think you can also use
QMidiArp, that should be no problem. If you want to run VB-303 in a VST
wrapper of sorts, which I understand are available for a strictly Linux
environment, then you do not need a sequencer, since VB-303 has an in-built
sequencer (just like TB-303 does).
On Fri, Dec 18, 2015 at 1:24 AM, jonetsu(a)teksavvy.com <
jonetsu(a)teksavvy.com> wrote:
--
Louigi Verona
http://www.louigiverona.com/
On Mon, 7 Dec 2015 13:03:39 +0100
set <public(a)sakrecoer.com> wrote:
Hi,
--
Louigi Verona
http://www.louigiverona.com/
In december, a few net-friends of mine have a
tradition: publish a new
Acid-House track each day, until there are no more tracks to be
published. Sometimes it has lasted until march...
Which tools are used to establish the repetitive events ? I'm
curious. What kind of sequencer ? What is the typical software
wiring ? I could see maybe Seq24. Would be maybe nice to
sync to an arpeggiator also. Then everything goes in Ardour. Do you
think it is possible to use an Ardour MIDI track for the foundation ?
Maybe copy/paste all along.
Cheers.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
6:56 p.m.
Am 18.12.2015 um 18:13 schrieb Louigi Verona:
I think Festige has been replaced with Carla, I think
you can run VSTs from Carla, but I am
not entirely sure.
Yes, with the latest Carla version compiled from the git repo, you can
run Windows 32-bit and 64-bit VSTs. It even supports VST2 and VST3.
You ned to also compile the carla-bridge-win32 and carla-bridge-win64
executables and DLLs. KXStudio should have packages for them. If you're
using Arch, you can also use these AUR packages:
https://aur.archlinux.org/packages/carla-git
https://aur.archlinux.org/packages/carla-bridges-win32-git
https://aur.archlinux.org/packages/carla-bridges-win64-git
But I do get quite a few xruns when using bridged plugins, even with a
RT kernel. Whereas, when I use native plugins, I can usually use a a 128
sample buffer without xruns, even with a cheap UCA-222 interface.
Chris
7:15 p.m.
Another important technical advice is that it is better to record your acid
TB-303 line separately and only then worry about the rest. Of course, you
can first make a track and leave space for 303, but the point is to record
the acid line separately, since it will allow you to give your full
attention to working your tb303 plugin and also make sure to have no xruns.
VB-303 in FLStudio, for instance, seems to require a lot of cpu. But it is
THE emulator of TB-303. And Nekobee is very good and has its own character,
I love it as an instrument.
On Dec 18, 2015 6:56 PM, "Christopher Arndt" <chris(a)chrisarndt.de> wrote:
Am 18.12.2015 um 18:13 schrieb Louigi Verona:
I think Festige has been replaced with Carla, I
think you can run VSTs
from Carla, but I am
not entirely sure.
Yes, with the latest Carla version compiled from the git repo, you can
run Windows 32-bit and 64-bit VSTs. It even supports VST2 and VST3.
You ned to also compile the carla-bridge-win32 and carla-bridge-win64
executables and DLLs. KXStudio should have packages for them. If you're
using Arch, you can also use these AUR packages:
https://aur.archlinux.org/packages/carla-git
https://aur.archlinux.org/packages/carla-bridges-win32-git
https://aur.archlinux.org/packages/carla-bridges-win64-git
But I do get quite a few xruns when using bridged plugins, even with a
RT kernel. Whereas, when I use native plugins, I can usually use a a 128
sample buffer without xruns, even with a cheap UCA-222 interface.
Chris
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
19 Dec
19 Dec
12:05 a.m.
On 2015-12-18 19:15, Louigi Verona wrote:
And Nekobee is very good and has its own character,
I love it as an instrument.
WORD! I was happy to find out today that calf's monosynth is capable of
exquisite TB-303 emulation! The parameters go beyond what is possible
what a 303, so it's easy to "cross the boundaries" so to speak, and end
up with something that truly sounds like "fake" TB-303. But by
establishing my own sweetspot-frame, i've achieved very good results
according to my personal acid standards. PHASEX is another candidate.
although here, the parameters waaaaaay beyond the TB-303. It's
interesting to see how too many options can be limiting, when ones idea
of the goal is very clear.... :)
--
Set Sakrecoer
8:24 p.m.
On Fri, 18 Dec 2015 18:55:48 +0100
Christopher Arndt <chris(a)chrisarndt.de> wrote:
Hallo,
Yes, with the latest Carla version compiled from the
git repo, you can
run Windows 32-bit and 64-bit VSTs. It even supports VST2 and VST3.
Is it possible to run Kontakt 5 and Reaktor 5 ?
20 Dec
20 Dec
10:26 p.m.
On 2015-12-19 21:02, Christopher Arndt wrote:
Am 19.12.2015 um 20:24 schrieb jonetsu(a)teksavvy.com:
Never thought about using VST on GNU/Linux... There are many VST's i
love, that i abandoned when i migrated. Although, since i use mainly
hardware synthesizers for sound generation, i quickly embraced the wide
range of LADSPA.
What are the advantages of using wine, over having a windows partition?
--
Set Sakrecoer
Is it possible to run Kontakt 5 and Reaktor 5 ?
I haven't used any commercial and/or copy-protected plugins yet,
only closed-source "free"ware.
Chris
21 Dec
21 Dec
12:02 a.m.
Am 20.12.2015 um 22:25 schrieb set:
Never thought about using VST on GNU/Linux... There
are many VST's i
love, that i abandoned when i migrated. Although, since i use mainly
hardware synthesizers for sound generation, i quickly embraced the wide
range of LADSPA.
What are the advantages of using wine, over having a windows partition?
You're bringing up several different aspects here:
1) VSTs are not exclusive to Windows/OS X nowadays. There are quite a
few Linux plugins in native VST format, even though most of them are
originally developed under Windows. Most of them come in LV2 format too,
so you have a choice to use whichever format works best for your host.
2) When I use Windows VSTs, it's because there are no suitable
alternatives for Linux. "Suitable" may have different definitions, i.e.
sometimes it may mean that Windows VSTs just have a better GUI,
automation capabilities or preset handling than equivalent Linux
plugins. Or, for example, I haven't found a simple, but good sounding
free bread-and-butter subtractive synth on Linux yet, which gives me a
good set of basic features and a well laid-out interface. Whereas there
are dozens of excellent choices in Windows VST land.
3) I have a Windows partition with a DAW setup, but if I can avoid it, I
don't want to have to shut down Linux and boot Windows. Running a DAW in
a virtual machine isn't going to work well either. But sometimes I have
a project where I need a plugin/instrument that only works under the
Window DAW, so I record some tracks under Windows and then later switch
to Linux to mix the project. In this case it is convenient to be able to
use the same effect plugins in the project, regardles of whether you
open it on Windows or Linux.
Chris
22 Dec
22 Dec
12:51 p.m.
On 2015-12-21 00:01, Christopher Arndt wrote:
You're bringing up several different aspects here:
Thank you for your detailed email, Christopher! It makes perfect sense.
It is difficult to find synthesizers that fits one's ideal. I think
people should use whatever they fancy, however they like, but your reply
made me very eager to try to do something on my own with the existing
offer in LV2 synthesizers. On the subtractive synthesis front, i must
say i'm super in love with phasex <3 I'll try to push this baby beyond
my own limits, and would i get satisfactory results (according to my won
standard, of course) i will share the patch here :)
Yours,
--
Set Sakrecoer
3261
days inactive
3276
days old
linux-audio-user@lists.linuxaudio.org
22 comments
5 participants
participants (5)
-
Christopher Arndt -
jonetsu -
jonetsu＠teksavvy.com
-
Louigi Verona -
set