10 Sep
2007
10 Sep
'07
1:07 p.m.
Hi all,
following a basic rule for open source project "publish early and often" I
release the very first (but quite feature-rich) version of TapStart to the
public.
TapStart is a basic tempo-measurement where you tap some beats and get the
(averaged) tempo displayed. But there is more to it:
- TapStart also updates the jack-tempo (if a running jack was found during
startup) and can even start the jack transport after a defined number of
taps. This is implemented for using this thing in jam-sessions to get a
click/drum-computer to play in a tempo not known before.
- TapStart can also send OSC-messages with the tempo/delay-value as argument
to any gives host and path.
You can find more information on its page at
http://www.arnoldarts.de/drupal/?q=TapStart
ofqf (http://www.arnoldarts.de/drupal/?q=node/573) is needed for the osc-part
and has to be installed beforehand.
The direct-link to the source package is:
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.tar.gz
ofqf: http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.1.tar.bz2
Have fun,
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a rm / -rf. Or ask your
administrator to do so...
10 Sep
10 Sep
5:08 p.m.
Arnold Krille wrote:
Hi all,
following a basic rule for open source project "publish early and often" I
release the very first (but quite feature-rich) version of TapStart to the
public.
TapStart is a basic tempo-measurement where you tap some beats and get the
(averaged) tempo displayed. But there is more to it:
- TapStart also updates the jack-tempo (if a running jack was found during
startup) and can even start the jack transport after a defined number of
taps. This is implemented for using this thing in jam-sessions to get a
click/drum-computer to play in a tempo not known before.
- TapStart can also send OSC-messages with the tempo/delay-value as argument
to any gives host and path.
You can find more information on its page at
http://www.arnoldarts.de/drupal/?q=TapStart
ofqf (http://www.arnoldarts.de/drupal/?q=node/573) is needed for the osc-part
and has to be installed beforehand.
The direct-link to the source package is:
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.tar.gz
ofqf: http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.1.tar.bz2
Have fun,
Arnold
hi arnold,
i am having different problems installing tapstart.
well, installing 'ofqf' was almost trivial, i only had to change the
QTDIR ntry in my .bash_profile to point to qt4 and to logout and login
again, than it got builded.
but now, running scons on tapstart, i get following error:
scons: Reading SConscript files ...
Checking for pkg-config (at least version 0.0.0)... yes
Checking for QtCore... yes
Checking for QtGui... yes
Checking for ofqf (0.1.1 or higher)... no
so what is the problem?
i already was runnung 'updatedb' as root and 'ldconfig' too, also i
tried restarting the machine.
the fact is:
/usr/local/include/ofqf
/usr/local/include/ofqf/qoscclient.h
/usr/local/include/ofqf/qoscserver.h
/usr/local/include/ofqf/qosctypes.h
/usr/local/lib/libofqf.so
/usr/local/lib/libofqf.so.0
/usr/local/lib/libofqf.so.0.1
/usr/local/lib/pkg-config/ofqf.pc
the pkg_config_path in my .bash_profile looks now like:
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/share/pkgconfig:/usr/local/lib/pkg-config
so, ofqf installed her .pc file in /usr/local/lib/pkg-config, and
usually on my system the dir is called 'pkgconfig' and not 'pkg-config'.
but still i do not understand, i extended the PKG_CONFIG_PATH with
/usr/local/lib/pkg-config and still it does not work.
i also tried to cp ofqf.pc into /usr/local/lib/pkgconfig, but this is
not helping either.
arnold, i hope that you have some better idea than me?!
cheers,
doc
p.s. scons is v0.97-0d20070809-1 from debian-testing
6 p.m.
On Tuesday 11 September 2007, Dragan Noveski wrote:
Arnold Krille wrote:
Two problems here!
1. pkg-config vs pkgconfig.
2. the version number in that file is ... 0.1 so I changed that to 0.1.1 and
voile.
Now BOTH scons compiles fail with the same error:
uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.7)
Having both around is the problem. How do I get the thing to recognize that I
am building fully a qt4 thing? There is no qmake in SConstruct
Hi all,
following a basic rule for open source project "publish early and often"
I release the very first (but quite feature-rich) version of TapStart to
the public.
TapStart is a basic tempo-measurement where you tap some beats and get
the (averaged) tempo displayed. But there is more to it:
- TapStart also updates the jack-tempo (if a running jack was found
during startup) and can even start the jack transport after a defined
number of taps. This is implemented for using this thing in jam-sessions
to get a click/drum-computer to play in a tempo not known before.
- TapStart can also send OSC-messages with the tempo/delay-value as
argument to any gives host and path.
You can find more information on its page at
http://www.arnoldarts.de/drupal/?q=TapStart
ofqf (http://www.arnoldarts.de/drupal/?q=node/573) is needed for the
osc-part and has to be installed beforehand.
The direct-link to the source package is:
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.tar
.gz ofqf:
http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.1.tar.bz2
Have fun,
Arnold
hi arnold,
i am having different problems installing tapstart.
well, installing 'ofqf' was almost trivial, i only had to change the
QTDIR ntry in my .bash_profile to point to qt4 and to logout and login
again, than it got builded.
but now, running scons on tapstart, i get following error:
scons: Reading SConscript files ...
Checking for pkg-config (at least version 0.0.0)... yes
Checking for QtCore... yes
Checking for QtGui... yes
Checking for ofqf (0.1.1 or higher)... no
so what is the problem?
i already was runnung 'updatedb' as root and 'ldconfig' too, also i
tried restarting the machine.
the fact is:
/usr/local/include/ofqf
/usr/local/include/ofqf/qoscclient.h
/usr/local/include/ofqf/qoscserver.h
/usr/local/include/ofqf/qosctypes.h
/usr/local/lib/libofqf.so
/usr/local/lib/libofqf.so.0
/usr/local/lib/libofqf.so.0.1
/usr/local/lib/pkg-config/ofqf.pc
the pkg_config_path in my .bash_profile looks now like:
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig:/usr/local/lib/pkgconfi
g:/usr/share/pkgconfig:/usr/local/lib/pkg-config
so, ofqf installed her .pc file in /usr/local/lib/pkg-config, and
usually on my system the dir is called 'pkgconfig' and not 'pkg-config'.
but still i do not understand, i extended the PKG_CONFIG_PATH with
/usr/local/lib/pkg-config and still it does not work.
i also tried to cp ofqf.pc into /usr/local/lib/pkgconfig, but this is
not helping either.
6:11 p.m.
David Baron wrote:
On Tuesday 11 September 2007, Dragan Noveski wrote:
for me in this case it was pretty easy, i only had to change the QTDIR
line in .bash_profile to show at qt4 and to logou/in again:
joe .bash_profile:
...
export QTDIR=/usr/share/qt4/
....
but sometimes it is some more work. in my distribution, in /usr/bin
there is symbol link caled 'uic' which is showing at /usr/bin/uic-qt4,
or /usr/bin/uic-qt3.
the same for:
- designer
- lrelease
- lupdate
- moc
- qmake
- uic
both of this are in qt4 and qt3.
for compiling b.e. 'clam' i have to change this links to show to the
right one version (qt3-qt4).
cheers,
doc
Arnold Krille wrote:
Two problems here!
1. pkg-config vs pkgconfig.
2. the version number in that file is ... 0.1 so I changed that to 0.1.1 and
voile.
Now BOTH scons compiles fail with the same error:
uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.7)
Having both around is the problem. How do I get the thing to recognize that I
am building fully a qt4 thing? There is no qmake in SConstruct
Hi all,
following a basic rule for open source project "publish early and often"
I release the very first (but quite feature-rich) version of TapStart to
the public.
TapStart is a basic tempo-measurement where you tap some beats and get
the (averaged) tempo displayed. But there is more to it:
- TapStart also updates the jack-tempo (if a running jack was found
during startup) and can even start the jack transport after a defined
number of taps. This is implemented for using this thing in jam-sessions
to get a click/drum-computer to play in a tempo not known before.
- TapStart can also send OSC-messages with the tempo/delay-value as
argument to any gives host and path.
You can find more information on its page at
http://www.arnoldarts.de/drupal/?q=TapStart
ofqf (http://www.arnoldarts.de/drupal/?q=node/573) is needed for the
osc-part and has to be installed beforehand.
The direct-link to the source package is:
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.tar
.gz ofqf:
http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.1.tar.bz2
Have fun,
Arnold
hi arnold,
i am having different problems installing tapstart.
well, installing 'ofqf' was almost trivial, i only had to change the
QTDIR ntry in my .bash_profile to point to qt4 and to logout and login
again, than it got builded.
but now, running scons on tapstart, i get following error:
scons: Reading SConscript files ...
Checking for pkg-config (at least version 0.0.0)... yes
Checking for QtCore... yes
Checking for QtGui... yes
Checking for ofqf (0.1.1 or higher)... no
so what is the problem?
i already was runnung 'updatedb' as root and 'ldconfig' too, also i
tried restarting the machine.
the fact is:
/usr/local/include/ofqf
/usr/local/include/ofqf/qoscclient.h
/usr/local/include/ofqf/qoscserver.h
/usr/local/include/ofqf/qosctypes.h
/usr/local/lib/libofqf.so
/usr/local/lib/libofqf.so.0
/usr/local/lib/libofqf.so.0.1
/usr/local/lib/pkg-config/ofqf.pc
the pkg_config_path in my .bash_profile looks now like:
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig:/usr/local/lib/pkgconfi
g:/usr/share/pkgconfig:/usr/local/lib/pkg-config
so, ofqf installed her .pc file in /usr/local/lib/pkg-config, and
usually on my system the dir is called 'pkgconfig' and not 'pkg-config'.
but still i do not understand, i extended the PKG_CONFIG_PATH with
/usr/local/lib/pkg-config and still it does not work.
i also tried to cp ofqf.pc into /usr/local/lib/pkgconfig, but this is
not helping either.
6:11 p.m.
Am Montag, 10. September 2007 schrieb Dragan Noveski:
but now, running scons on tapstart, i get following
error:
scons: Reading SConscript files ...
Checking for pkg-config (at least version 0.0.0)... yes
Checking for QtCore... yes
Checking for QtGui... yes
Checking for ofqf (0.1.1 or higher)... no
so what is the problem?
the pkg_config_path in my .bash_profile looks now
like:
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig:/usr/local/lib/pkgconfi
g:/usr/share/pkgconfig:/usr/local/lib/pkg-config
Yeah, I really should do the ofqf-0.1.2-release that fixes this...
but still i do not understand, i extended the
PKG_CONFIG_PATH with
/usr/local/lib/pkg-config and still it does not work.
i also tried to cp ofqf.pc into /usr/local/lib/pkgconfig, but this is
not helping either.
Yeah, I just realized that ofqf-0.1.1 installs it pc-file with a version of
0.1. So either adopt the requirement in TapStart's SConstruct or change the
version-line in the pkg-config-file to say 0.1.1...
I think I will do some more releases tomorrow. ;-)
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a rm / -rf. Or ask your
administrator to do so...
11 Sep
11 Sep
11:28 a.m.
New subject: [ANN] TapStart 0.1.1 and ofqf 0.1.2 released
Hi all,
Am Montag, 10. September 2007 schrieb Arnold Krille:
following a basic rule for open source project
"publish early and often" I
release the very first (but quite feature-rich) version of TapStart to the
public.
Still releasing often...
Incorporating some changes from the buildsystem in ofqf and a bug I found in
tapstart itself I hereby announce the public release of ofqf-0.1.2 and
tapstart-0.1.1.
Grab the packages from
http://www.arnoldarts.de/drupal/?q=ofqf
http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.2.tar.bz2
and
http://www.arnoldarts.de/drupal/?q=TapStart
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.1.tar…
These two are still rather basic alpha-releases, the buildsystem is not nearly
complete (next version will do better) and you have to make sure the qt4 moc
and uic are in the path before the qt3 ones... (qt-libs are detected by
pkg-config and should simply work)
Have a nice day everyone,
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a rm / -rf. Or ask your
administrator to do so...
12:07 p.m.
New subject: [ANN] TapStart 0.1.1 and ofqf 0.1.2 released
Arnold Krille wrote:
Hi all,
Am Montag, 10. September 2007 schrieb Arnold Krille:
hi arnold, this time the ofqf and tapStart are building without any
problems here,
congratulation for the second release!!
cheers,
doc
following a basic rule for open source project
"publish early and often" I
release the very first (but quite feature-rich) version of TapStart to the
public.
Still releasing often...
Incorporating some changes from the buildsystem in ofqf and a bug I found in
tapstart itself I hereby announce the public release of ofqf-0.1.2 and
tapstart-0.1.1.
Grab the packages from
http://www.arnoldarts.de/drupal/?q=ofqf
http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.2.tar.bz2
and
http://www.arnoldarts.de/drupal/?q=TapStart
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.1.tar…
These two are still rather basic alpha-releases, the buildsystem is not nearly
complete (next version will do better) and you have to make sure the qt4 moc
and uic are in the path before the qt3 ones... (qt-libs are detected by
pkg-config and should simply work)
Have a nice day everyone,
Arnold
4 Sep
4 Sep
12:39 p.m.
New subject: [ANN] TapStart 0.1.1 and ofqf 0.1.2 released
Hi Arnols and others,
hi arnold, this time the ofqf and tapStart are building without any problems
here,
congratulation for the second release!!
the same here!
... when running tapStart I get an error message:
error while loading shared libraries: libofqf.so: cannot open shared
object file: No such file or directory
though ofqf is installed the libs seem to be in place:
minos@digital:~$ ls /usr/local/lib/ | grep ofq
libofqf.so
libofqf.so.0
libofqf.so.0.1
minos@digital:~$
any suggestion?
best,
d
5714
days inactive
6074
days old
linux-audio-user@lists.linuxaudio.org
7 comments
4 participants
participants (4)
-
Arnold Krille -
David Adler -
David Baron -
Dragan Noveski