10 Sep
2007
10 Sep
'07
6:11 p.m.
David Baron wrote:
On Tuesday 11 September 2007, Dragan Noveski wrote:
for me in this case it was pretty easy, i only had to change the QTDIR
line in .bash_profile to show at qt4 and to logou/in again:
joe .bash_profile:
...
export QTDIR=/usr/share/qt4/
....
but sometimes it is some more work. in my distribution, in /usr/bin
there is symbol link caled 'uic' which is showing at /usr/bin/uic-qt4,
or /usr/bin/uic-qt3.
the same for:
- designer
- lrelease
- lupdate
- moc
- qmake
- uic
both of this are in qt4 and qt3.
for compiling b.e. 'clam' i have to change this links to show to the
right one version (qt3-qt4).
cheers,
doc
Arnold Krille wrote:
Two problems here!
1. pkg-config vs pkgconfig.
2. the version number in that file is ... 0.1 so I changed that to 0.1.1 and
voile.
Now BOTH scons compiles fail with the same error:
uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.7)
Having both around is the problem. How do I get the thing to recognize that I
am building fully a qt4 thing? There is no qmake in SConstruct
Hi all,
following a basic rule for open source project "publish early and often"
I release the very first (but quite feature-rich) version of TapStart to
the public.
TapStart is a basic tempo-measurement where you tap some beats and get
the (averaged) tempo displayed. But there is more to it:
- TapStart also updates the jack-tempo (if a running jack was found
during startup) and can even start the jack transport after a defined
number of taps. This is implemented for using this thing in jam-sessions
to get a click/drum-computer to play in a tempo not known before.
- TapStart can also send OSC-messages with the tempo/delay-value as
argument to any gives host and path.
You can find more information on its page at
http://www.arnoldarts.de/drupal/?q=TapStart
ofqf (http://www.arnoldarts.de/drupal/?q=node/573) is needed for the
osc-part and has to be installed beforehand.
The direct-link to the source package is:
http://www.arnoldarts.de/drupal/files/downloads/tapstart/tapstart-0.1.tar
.gz ofqf:
http://www.arnoldarts.de/drupal/files/downloads/ofqf/ofqf-0.1.1.tar.bz2
Have fun,
Arnold
hi arnold,
i am having different problems installing tapstart.
well, installing 'ofqf' was almost trivial, i only had to change the
QTDIR ntry in my .bash_profile to point to qt4 and to logout and login
again, than it got builded.
but now, running scons on tapstart, i get following error:
scons: Reading SConscript files ...
Checking for pkg-config (at least version 0.0.0)... yes
Checking for QtCore... yes
Checking for QtGui... yes
Checking for ofqf (0.1.1 or higher)... no
so what is the problem?
i already was runnung 'updatedb' as root and 'ldconfig' too, also i
tried restarting the machine.
the fact is:
/usr/local/include/ofqf
/usr/local/include/ofqf/qoscclient.h
/usr/local/include/ofqf/qoscserver.h
/usr/local/include/ofqf/qosctypes.h
/usr/local/lib/libofqf.so
/usr/local/lib/libofqf.so.0
/usr/local/lib/libofqf.so.0.1
/usr/local/lib/pkg-config/ofqf.pc
the pkg_config_path in my .bash_profile looks now like:
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/lib/pkgconfig:/usr/local/lib/pkgconfi
g:/usr/share/pkgconfig:/usr/local/lib/pkg-config
so, ofqf installed her .pc file in /usr/local/lib/pkg-config, and
usually on my system the dir is called 'pkgconfig' and not 'pkg-config'.
but still i do not understand, i extended the PKG_CONFIG_PATH with
/usr/local/lib/pkg-config and still it does not work.
i also tried to cp ofqf.pc into /usr/local/lib/pkgconfig, but this is
not helping either.