9 Mar
2009
9 Mar
'09
8:53 p.m.
A quick and somewhat ruefully embarrasing question.
I'm going through my old executable scripts, rebuilding an auto startup for
a sequence of apps and associated templates for my new debian 32bit build.
But i'm stuck on a really simple one i haven't used in a script before.
Jconv.
I'd like to do the following:
blah@blah $ cd ir
blah@blah/ir $ jconv concert3.conf
as an automated script, so i need to cd to the relavent directory, then
provoke jconv into all it's formidable glory.
I'm going through my bash commands manual, but can't find out how to cd to a
directory and enact a command, all in one go.
I know this is simple stuff, so apologies in advance for the really dumb
question.
Alex.
--
Parchment Studios (It started as a joke...)
9:10 p.m.
Gabriel M. Beddingfield wrote:
alex stone wrote:
you could always do /foo/bin/jconv /foo/bar/baz/your.conf as well.
I'd like to do the following:
blah@blah $ cd ir
blah@blah/ir $ jconv concert3.conf
as an automated script, so i need to cd to the relavent directory, then
provoke jconv into all it's formidable glory.
$ cd ir && jconv concert3.conf 
10 Mar
10 Mar
4:34 a.m.
On Tuesday 10 March 2009 00:53:25 alex stone wrote:
I'm going through my bash commands manual, but
can't find out how to cd to
a directory and enact a command, all in one go.
( cd <dir> && <command> )
All in the parentheses is executed in the same (sub-)shell.
Have fun,
Arnold
5:50 a.m.
On Tue, Mar 10, 2009 at 02:53:25AM +0300, alex stone wrote:
I'd like to do the following:
blah@blah $ cd ir
blah@blah/ir $ jconv concert3.conf
You can just do
jconv path_to_config_file
and use the /cd command in the config file to
point to the dir where you store the IRs.
It's documented in almost all examples.
Since yesterday a new version of jconv also
allows to give sensible names to its ports,
and to connect them. Will be tested today
in real life, and if all OK released tonight.
The normal way to use this is
- put all IR and config files in a system dir,
e.g. /usr/share/jconv
- copy the config file you need to your
session directory, and modify as
required.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
6:56 a.m.
On Tue, Mar 10, 2009 at 11:48 AM, Fons Adriaensen <fons(a)kokkinizita.net>wrote;wrote:
On Tue, Mar 10, 2009 at 02:53:25AM +0300, alex stone
wrote:
Thank you all. Problem solved, and working fine.
Fons, thanks for the heads up on the update.
Alex.
--
Parchment Studios (It started as a joke...)
I'd like to do the following:
blah@blah $ cd ir
blah@blah/ir $ jconv concert3.conf
You can just do
jconv path_to_config_file
and use the /cd command in the config file to
point to the dir where you store the IRs.
It's documented in almost all examples.
Since yesterday a new version of jconv also
allows to give sensible names to its ports,
and to connect them. Will be tested today
in real life, and if all OK released tonight.
The normal way to use this is
- put all IR and config files in a system dir,
e.g. /usr/share/jconv
- copy the config file you need to your
session directory, and modify as
required.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
7:59 a.m.
On Tue, Mar 10, 2009 at 12:56 PM, alex stone <compose59(a)gmail.com> wrote:
On Tue, Mar 10, 2009 at 11:48 AM, Fons Adriaensen <fons(a)kokkinizita.net>wrote;wrote:
Fons, just confiming, 0.2.0 is the update, yes?
Alex.
--
Parchment Studios (It started as a joke...)
On Tue, Mar 10, 2009 at 02:53:25AM +0300, alex
stone wrote:
Thank you all. Problem solved, and working fine.
Fons, thanks for the heads up on the update.
Alex.
--
Parchment Studios (It started as a joke...)
I'd like to do the following:
blah@blah $ cd ir
blah@blah/ir $ jconv concert3.conf
You can just do
jconv path_to_config_file
and use the /cd command in the config file to
point to the dir where you store the IRs.
It's documented in almost all examples.
Since yesterday a new version of jconv also
allows to give sensible names to its ports,
and to connect them. Will be tested today
in real life, and if all OK released tonight.
The normal way to use this is
- put all IR and config files in a system dir,
e.g. /usr/share/jconv
- copy the config file you need to your
session directory, and modify as
required.
Ciao,
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
5:31 p.m.
On Tue, Mar 10, 2009 at 01:59:43PM +0300, alex stone wrote:
Fons, just confiming, 0.2.0 is the update, yes?
No, it's not yet uploaded. Will be some time
tonight.
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
5:46 p.m.
On Tue, Mar 10, 2009 at 11:29 PM, Fons Adriaensen <fons(a)kokkinizita.net>wrote;wrote:
On Tue, Mar 10, 2009 at 01:59:43PM +0300, alex stone
wrote:
.
I'll get the pizza and cognac ready to celebrate.
Thanks
Alex.
--
Parchment Studios (It started as a joke...)
Fons, just confiming, 0.2.0 is the update, yes?
No, it's not yet uploaded. Will be some time
tonight.
--
FA
Laboratorio di Acustica ed Elettroacustica
Parma, Italia
Be quiet, Master Land; and you, Professor,
will you be so good as to listen to me ?
5535
days inactive
5536
days old
linux-audio-user@lists.linuxaudio.org
8 comments
5 participants
participants (5)
-
alex stone -
Arnold Krille -
Fons Adriaensen -
Gabriel M. Beddingfield -
Jörn Nettingsmeier