26 May
2011
26 May
'11
10:26 a.m.
Hi,
first of all, I know that it looks like an Ardour-specific question, but
it's not. Not fully, at least :-)
I'd like to publish the music I make not only in MP3, but also in a way
that anyone can download and modify it at will. Ideally, there would be some
kind of "bundle export" in Ardour that I could use to create an archive that
included all the audio files and the metadata of the project. But I've
searched and didn't find anything similar. Does it exist?
And if it doesn't, what could I use as a substitute? I figured I could
export all the audio in FLAC, and I could share the Hydrogen file for the
drums, but what about the effects, and the automation? I don't think the
"Right Way" is to export audio with effects applied, because (IMHO) part of
the fun is applying effects that weren't in the original mix. But I'm a
complete newbie in this field, and I don't know if it's how people usually
do it.
Thanks in advance.
--
Roberto Suárez Soto
26 May
26 May
10:35 a.m.
On Thu, 26 May 2011 10:26:47 +0200
Roberto Suárez Soto <talkingxouba(a)gmail.com> wrote:
Hi,
first of all, I know that it looks like an Ardour-specific question, but
it's not. Not fully, at least :-)
I'd like to publish the music I make not only in MP3, but also in a way
that anyone can download and modify it at will. Ideally, there would be some
kind of "bundle export" in Ardour that I could use to create an archive that
included all the audio files and the metadata of the project. But I've
searched and didn't find anything similar. Does it exist?
And if it doesn't, what could I use as a substitute? I figured I could
export all the audio in FLAC, and I could share the Hydrogen file for the
drums, but what about the effects, and the automation? I don't think the
"Right Way" is to export audio with effects applied, because (IMHO) part of
the fun is applying effects that weren't in the original mix. But I'm a
complete newbie in this field, and I don't know if it's how people usually
do it.
Thanks in advance.
Couldn't you just tar the ardour project directory and export hydrogen bank?
--
FreeB(eer)S(ex)D(rugs) are the real daemons
12:06 p.m.
2011/5/26 Goran Mekić <meka(a)lugons.org>
Couldn't you just tar the ardour project directory and export
hydrogen bank?
That's a good question. I don't know, because last time I looked into
it, the project directory had a lot of things. I could try, anyway. Thanks
for the hint.
--
Roberto Suárez Soto
1:51 p.m.
On Thu, May 26, 2011 at 6:06 AM, Roberto Suárez Soto
<talkingxouba(a)gmail.com> wrote:
2011/5/26 Goran Mekić <meka(a)lugons.org>
it has everything needed to fully recreate the session in another
instance of ardour. the "interchange" subtree has all the actual data
files, but does not contain the session file that actually describes
how to arrange the data to recreate the session or the peak data used
to draw waveforms.
what you're actually looking for is "stem export" which is not
easily/simply available in ardour2, but is available (though not very
tested) in a3. it will automatically produce a set of audio files, all
the same length, 1 per track, of either the entire session or some
specified range within it.
Couldn't you just tar the ardour project directory and export
hydrogen bank?
That's a good question. I don't know, because last time I looked into
it, the project directory had a lot of things. 
4:46 p.m.
2011/5/26 Paul Davis <paul(a)linuxaudiosystems.com>om>:
what you're actually looking for is "stem
export" which is not
easily/simply available in ardour2, but is available (though not very
tested) in a3. it will automatically produce a set of audio files, all
the same length, 1 per track, of either the entire session or some
specified range within it.
Hell yes, time to start looking at a3, a project I have planned for
this fall will greatly benefit from this functionality.
27 May
27 May
12:08 a.m.
On 05/26/2011 01:51 PM, Paul Davis wrote:
what you're actually looking for is "stem
export" which is not
easily/simply available in ardour2, but is available (though not very
tested) in a3. it will automatically produce a set of audio files, all
the same length, 1 per track, of either the entire session or some
specified range within it.
a while ago, i created ardour demo sessions for the openDAW project, and
i was looking for a way to let people play with pretty much everything
except the edits. so i created a full copy of my ardour session
directory, used ardour2's "consolidate" feature to bounce all the messy
edits into one single region per track, then got rid of all older
snapshots. now i could clean up unused sources, and hey presto: a nice
and concise session that gives a user maximum leeway in fiddling around.
if you want to play:
http://stackingdwarves.net/TIH.tar (guitar and saxophone duo)
http://stackingdwarves.net/MFV.tar (cheesy jazz sextet standard)
both are mixing to third-order ambisonics and use an UHJ encoder for
stereo downmixing.
i abused ardour's session directory a bit, in that i added some session
photos and copied all external config files in there as well (mainly for
jconvolver), so that it contains pretty much everything you need to hear
what i was hearing. there's also a shell script that probably won't work
on most people's systems, but gives you an idea what programs i was
using in addition to ardour2.
12:56 a.m.
On 05/27/2011 12:08 AM, Jörn Nettingsmeier wrote:
On 05/26/2011 01:51 PM, Paul Davis wrote:
Why wouldn't the start-session.sh work?
One just need jconvolver, tetraproc, zita-rev1, jkmeter (all of which
are in debian these days) and of course ardour2 with jackd already
running (jack_lsp, jack_connect come with jackd).
Note: The default number of JACK-ports (256) is not enough to load these
sessions. Increase the max number of JACK ports to at least 1024
(qjackctl setup "Port Maximum" ; or jackd's '-p' option).
They are amazing sessions! Outstanding work on all accounts. Cheesy
music, hell yeah, but very well done.
BTW, This was the first ardour-session that I've seen with nicely
written comments on _every_ track/bus. Don't miss those - bottom of
ardour's mixer-strip.
@JACK-devs: please load these sessions and experience first hand that
port-creation/connection is waaaay too slow. For example loading the MFV
session ~ 500 JACK ports with jackdmp/dbus 1.9.8 takes >30 seconds here!
--
Robin Gareus
84bis Rue de Grenelle
75007 Paris, France
mobile: +33 612 738 346
mailto: robin(a)gareus.org
jabber: xmpp:rgareus@ik.nu
phone & fax: +33 95 222 567 2
Public Key at http://pgp.mit.edu/
Fingerprint : 7107 840B 4DC9 C948 076D 6359 7955 24F1 4F95 2B42
what you're actually looking for is
"stem export" which is not
easily/simply available in ardour2, but is available (though not very
tested) in a3. it will automatically produce a set of audio files, all
the same length, 1 per track, of either the entire session or some
specified range within it.
a while ago, i created ardour demo sessions for the openDAW project, and
i was looking for a way to let people play with pretty much everything
except the edits. so i created a full copy of my ardour session
directory, used ardour2's "consolidate" feature to bounce all the messy
edits into one single region per track, then got rid of all older
snapshots. now i could clean up unused sources, and hey presto: a nice
and concise session that gives a user maximum leeway in fiddling around.
if you want to play:
http://stackingdwarves.net/TIH.tar (guitar and saxophone duo)
http://stackingdwarves.net/MFV.tar (cheesy jazz sextet standard)
both are mixing to third-order ambisonics and use an UHJ encoder for
stereo downmixing.
i abused ardour's session directory a bit, in that i added some session
photos and copied all external config files in there as well (mainly for
jconvolver), so that it contains pretty much everything you need to hear
what i was hearing. there's also a shell script that probably won't work
on most people's systems, but gives you an idea what programs i was
using in addition to ardour2.
12:56 a.m.
On 05/27/2011 12:08 AM, Jörn Nettingsmeier wrote:
On 05/26/2011 01:51 PM, Paul Davis wrote:
Why wouldn't the start-session.sh work?
One just need jconvolver, tetraproc, zita-rev1, jkmeter (all of which
are in debian these days) and of course ardour2 with jackd already
running (jack_lsp, jack_connect come with jackd).
Note: The default number of JACK-ports (256) is not enough to load these
sessions. Increase the max number of JACK ports to at least 1024
(qjackctl setup "Port Maximum" ; or jackd's '-p' option).
They are amazing sessions! Outstanding work on all accounts. Cheesy
music, hell yeah, but very well done.
BTW, This was the first ardour-session that I've seen with nicely
written comments on _every_ track/bus. Don't miss those - bottom of
ardour's mixer-strip.
@JACK-devs: please load these sessions and experience first hand that
port-creation/connection is waaaay too slow. For example loading the MFV
session ~ 500 JACK ports with jackdmp/dbus 1.9.8 takes >30 seconds here!
Cheers!
robin
what you're actually looking for is
"stem export" which is not
easily/simply available in ardour2, but is available (though not very
tested) in a3. it will automatically produce a set of audio files, all
the same length, 1 per track, of either the entire session or some
specified range within it.
a while ago, i created ardour demo sessions for the openDAW project, and
i was looking for a way to let people play with pretty much everything
except the edits. so i created a full copy of my ardour session
directory, used ardour2's "consolidate" feature to bounce all the messy
edits into one single region per track, then got rid of all older
snapshots. now i could clean up unused sources, and hey presto: a nice
and concise session that gives a user maximum leeway in fiddling around.
if you want to play:
http://stackingdwarves.net/TIH.tar (guitar and saxophone duo)
http://stackingdwarves.net/MFV.tar (cheesy jazz sextet standard)
both are mixing to third-order ambisonics and use an UHJ encoder for
stereo downmixing.
i abused ardour's session directory a bit, in that i added some session
photos and copied all external config files in there as well (mainly for
jconvolver), so that it contains pretty much everything you need to hear
what i was hearing. there's also a shell script that probably won't work
on most people's systems, but gives you an idea what programs i was
using in addition to ardour2. 
10:08 p.m.
On Fri, May 27, 2011 at 12:08:34AM +0200, Jörn Nettingsmeier wrote:
http://stackingdwarves.net/TIH.tar (guitar and
saxophone duo)
http://stackingdwarves.net/MFV.tar (cheesy jazz sextet standard)
Thanks for making these available ! They provide excellent use
cases for the AMB mixer that's slowly taking shape.
I've got a strange problem with MFV. *Something* is poisoning
the signal graph with Nans or Infs. One visible result is that
e.g. the W channel of one of the jkmeters shows only peaks and
no RMS values (this is to be expected if the filter state gets
a Nan - once a Nan always a Nan). The other indication is that
adding an Ambdec produces a never ending xrun storm even if the
effective CPU load remains below 10%.
Have you seen anything similar ?
Ciao,
--
FA
28 May
28 May
1:37 a.m.
On 05/27/2011 10:08 PM, Fons Adriaensen wrote:
On Fri, May 27, 2011 at 12:08:34AM +0200, Jörn
Nettingsmeier wrote:
not in this session. sc4 can be funny at times, but i haven't had any
issues with it for quite a while. i don't have access to the session
atm, will ake a look when i return home on sunday. meanwhile, if you
want to pinpoint the problem, try muting all channels and then unmute
one by one.
do the nans crop up immediately, or only after playing some audio?
http://stackingdwarves.net/TIH.tar (guitar and
saxophone duo)
http://stackingdwarves.net/MFV.tar (cheesy jazz sextet standard)
Thanks for making these available ! They provide excellent use
cases for the AMB mixer that's slowly taking shape.
I've got a strange problem with MFV. *Something* is poisoning
the signal graph with Nans or Infs. One visible result is that
e.g. the W channel of one of the jkmeters shows only peaks and
no RMS values (this is to be expected if the filter state gets
a Nan - once a Nan always a Nan). The other indication is that
adding an Ambdec produces a never ending xrun storm even if the
effective CPU load remains below 10%.
Have you seen anything similar ?
30 May
30 May
10:21 a.m.
On 05/28/2011 01:37 AM, Jörn Nettingsmeier wrote:
i just tested the session again, and i don't see any NaNs or INFs. what
i did notice, though, is that i'm burning a ridiculous amount of cpu for
this tiny little arrangement - i had tried with 64 frames initially, and
it maxes out immediately (on an 2.6 ghz i5 quad-core). safe way to run
it is at -p 1024 -n2.
regards,
jörn
On 05/27/2011 10:08 PM, Fons Adriaensen wrote:
I've got a
strange problem with MFV. *Something* is poisoning
the signal graph with Nans or Infs. One visible result is that
e.g. the W channel of one of the jkmeters shows only peaks and
no RMS values (this is to be expected if the filter state gets
a Nan - once a Nan always a Nan). The other indication is that
adding an Ambdec produces a never ending xrun storm even if the
effective CPU load remains below 10%.
Have you seen anything similar ?
not in this session. sc4 can be funny at times, but i haven't had any
issues with it for quite a while. i don't have access to the session
atm, will ake a look when i return home on sunday. meanwhile, if you
want to pinpoint the problem, try muting all channels and then unmute
one by one.
do the nans crop up immediately, or only after playing some audio?
1 Jun
1 Jun
4:29 p.m.
On Mon, May 30, 2011 at 10:28:14AM +0200, Jörn Nettingsmeier wrote:
On 05/28/2011 01:37 AM, Jörn Nettingsmeier wrote:
i just tested the session again, and i don't see any NaNs or INFs. what
i did notice, though, is that i'm burning a ridiculous amount of cpu for
this tiny little arrangement - i had tried with 64 frames initially, and
it maxes out immediately (on an 2.6 ghz i5 quad-core). safe way to run
it is at -p 1024 -n2.
Turned out to be jconvolver. Added some Nan testing code to zita-convolver
and the problem disappeared, also without the extra code. Could be I
accidentally installed a version compiled on another machine. But then
it's a miracle non of this showed up earlier...
I'm running it on dual qaud-core, period size 256, and CPU load remains
below 10%.
Nice recording BTW. The flugelhorn solo triggered happy memories of
recording the BRTN jazz orchestra - we had an marvellous trumpet /
flugerhorn player then, Bert Joris <http://www.bertjoris.be/>.
Ciao,
--
FA
On 05/27/2011 10:08 PM, Fons Adriaensen wrote:
I've
got a strange problem with MFV. *Something* is poisoning
the signal graph with Nans or Infs. One visible result is that
e.g. the W channel of one of the jkmeters shows only peaks and
no RMS values (this is to be expected if the filter state gets
a Nan - once a Nan always a Nan). The other indication is that
adding an Ambdec produces a never ending xrun storm even if the
effective CPU load remains below 10%.
Have you seen anything similar ?
not in this session. sc4 can be funny at times, but i haven't had any
issues with it for quite a while. i don't have access to the session
atm, will ake a look when i return home on sunday. meanwhile, if you
want to pinpoint the problem, try muting all channels and then unmute
one by one.
do the nans crop up immediately, or only after playing some audio?
2 Jun
2 Jun
6:26 p.m.
On 06/01/2011 04:29 PM, Fons Adriaensen wrote:
On Mon, May 30, 2011 at 10:28:14AM +0200, Jörn
Nettingsmeier wrote:
funny. never seen that.
On 05/28/2011 01:37 AM, Jörn Nettingsmeier
wrote:
i just tested the session again, and i don't see any NaNs or INFs. what
i did notice, though, is that i'm burning a ridiculous amount of cpu for
this tiny little arrangement - i had tried with 64 frames initially, and
it maxes out immediately (on an 2.6 ghz i5 quad-core). safe way to run
it is at -p 1024 -n2.
Turned out to be jconvolver. Added some Nan testing code to zita-convolver
and the problem disappeared, also without the extra code. Could be I
accidentally installed a version compiled on another machine. But then
it's a miracle non of this showed up earlier... On 05/27/2011 10:08 PM, Fons Adriaensen wrote:
I've
got a strange problem with MFV. *Something* is poisoning
the signal graph with Nans or Infs. One visible result is that
e.g. the W channel of one of the jkmeters shows only peaks and
no RMS values (this is to be expected if the filter state gets
a Nan - once a Nan always a Nan). The other indication is that
adding an Ambdec produces a never ending xrun storm even if the
effective CPU load remains below 10%.
Have you seen anything similar ?
not in this session. sc4 can be funny at times, but i haven't had any
issues with it for quite a while. i don't have access to the session
atm, will ake a look when i return home on sunday. meanwhile, if you
want to pinpoint the problem, try muting all channels and then unmute
one by one.
do the nans crop up immediately, or only after playing some audio? Nice recording BTW. The flugelhorn solo triggered
happy memories of
recording the BRTN jazz orchestra - we had an marvellous trumpet /
flugerhorn player then, Bert Joris<http://www.bertjoris.be/>.
thanks. yeah, flügelhorn is really like a hello kitty pillowcase for the
soul ;-P
it's to the trumpet what the double-bass is to the electric bass guitar
- the restrained, subtle version. you can't noodle around easily, you
have to mean it (says an electric bass player).
cheers,
jörn
26 May
26 May
11:03 a.m.
On 05/26/2011 10:26 AM, Roberto Suárez Soto wrote:
And if it doesn't, what could I use as a
substitute? I figured I
could export all the audio in FLAC, and I could share the Hydrogen file
for the drums, but what about the effects, and the automation? I don't
think the "Right Way" is to export audio with effects applied, because
(IMHO) part of the fun is applying effects that weren't in the original
mix. But I'm a complete newbie in this field, and I don't know if it's
how people usually do it.
Well, what I did was to make sure there was no or little unused audio
left in the session, bounced parts with not-so-common effects, wavpacked
the audio files and put them along with the session folder in a tarball.
FLAC doesn't work with float-format, but wavpack does, so you have an
entirely losless option.
Here wavpacking turned 184.5 MB into 75.8:
http://www.archive.org/details/we_dont_want_you
From the feedback I got I know at least some people have been able to
restore the session without problems.
Did the same again:
http://www.archive.org/details/woxitron
http://www.archive.org/details/countint
--
Thorsten Wilms
thorwil's design for free software:
http://thorwil.wordpress.com/
29 May
29 May
7:49 p.m.
New subject: AudioGIT and Ardour sources to DL [Re: Sharing of Ardour projects]
On Thu, May 26, 2011 at 11:03:30AM +0200, Thorsten Wilms wrote :
On 05/26/2011 10:26 AM, Roberto Suárez Soto wrote:
Hi!
First of all, just a reminder, every productions of the AMMD Freak Free
Arts Coo[r]p is available on archive.org in Ardour multitrack session
format. You also will find LSM (libre software meeting) 2010's shows
multitrack sessions as well[1].
[1] http://www.archive.org/search.php?query=ammd
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/SRC-tgz_Sebkha-Chott-Niglah_Tapisseries_Fine…
http://www.archive.org/details/RMLL2010_20100706_Lessazo_Sources
http://www.archive.org/details/Sebkha-chott-Niglah-Inch
http://www.archive.org/details/Sebkha-chott-Niglah-Inch_910
http://www.archive.org/details/RMLL2010_20100709_TroisPtitsPoints_Sources
http://www.archive.org/details/SebkhaChott_20100710_Live_RMLL2010_Bordeaux_…
http://www.archive.org/details/RMLL2010_20100706_EnfantsTerribles_Sources
(There might be some others, but archive.org search engine is a bit not
exhasutive)
Second, the AMMD is thinking about a new (as far as we know) of
net-album concept, which would include such things like sharing ardour
files (and making re-appropriation easy). We called that audioGIT, it's
really a debut project, by now, we're making proofs of concept, and are
trying to think the better way to achieve this. You can read more (in
French) about this here[2]. Any help appreciated, any contribution is
welcome, and so on, just write us (orl(a)ammd.net).
[2] https://github.com/orlammd/AudioGIT/wiki
--
Aurélien
And if it doesn't, what could I use as a
substitute? I figured I
could export all the audio in FLAC, and I could share the Hydrogen file
for the drums, but what about the effects, and the automation? I don't
think the "Right Way" is to export audio with effects applied, because
(IMHO) part of the fun is applying effects that weren't in the original
mix. But I'm a complete newbie in this field, and I don't know if it's
how people usually do it.
Well, what I did was to make sure there was no or little unused
audio left in the session, bounced parts with not-so-common effects,
wavpacked the audio files and put them along with the session folder
in a tarball.
FLAC doesn't work with float-format, but wavpack does, so you have
an entirely losless option.
Here wavpacking turned 184.5 MB into 75.8:
http://www.archive.org/details/we_dont_want_you
From the feedback I got I know at least some people have been able
to restore the session without problems.
Did the same again:
http://www.archive.org/details/woxitron
http://www.archive.org/details/countint
--
Thorsten Wilms
thorwil's design for free software:
http://thorwil.wordpress.com/
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
4722
days inactive
4729
days old
linux-audio-user@lists.linuxaudio.org
14 comments
9 participants
participants (9)
-
Arve Barsnes -
Aurelien -
Fons Adriaensen -
Goran Mekić -
Jörn Nettingsmeier -
Paul Davis -
Roberto Suárez Soto -
Robin Gareus -
Thorsten Wilms