2 Jun
2016
2 Jun
'16
9:26 a.m.
Hello,
I'm still not a linux expert, sorry !
I'm experiencing problem in trying to compile LADSPA on the RaspberryPi B.
*My goal is to make convolution using Impulse Convolver with my own ir.*
I can install LADSPA and use it, including Impulse Convolver however, that
way it is not possible to use my own ir.
*So I'm trying to compile LADSPA.
But it doesn't work ???*
This what I did :
#1 Install FFTW3
wget http://www.fftw.org/fftw-3.3.4.tar.gz
tar -zxvf fftw-3.3.4.tar.gz
cd fftw-3.3.4
./configure --enable-single
make
make install
#2 Compile LADSPA
git clone https://github.com/swh/ladspa.git
cd ladspa
./configure
make
However it fails whatever the way I try it :
/root@SheBe:~/ladspa# make
make all-recursive
make[1]: Entering directory '/root/ladspa'
Making all in po
make[2]: Entering directory '/root/ladspa/po'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/ladspa/po'
Making all in util
make[2]: Entering directory '/root/ladspa/util'
gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -I@top_srcdir@/intl -I@top_srcdir@
-Wall -O3 -fomit-frame-pointer -fstrength-reduce -funroll-loops -ffast-math
-fPIC -DPIC -march=armv6l -MT rms.o -MD -MP -MF .deps/rms.Tpo -c -o rms.o
rms.c
gcc: error: unrecognized argument in option ‘-march=armv6l’
gcc: note: valid arguments to ‘-march=’ are: armv2 armv2a armv3 armv3m armv4
armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m
armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve
armv8-a armv8-a+crc iwmmxt iwmmxt2 native
Makefile:427: recipe for target 'rms.o' failed
make[2]: *** [rms.o] Error 1
make[2]: Leaving directory '/root/ladspa/util'
Makefile:1379: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/root/ladspa'
Makefile:859: recipe for target 'all' failed
make: *** [all] Error 2/
ANY IDEA ????
Thank you all !
Jean
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
2 Jun
2 Jun
9:55 a.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Salut Jean,
I'm still not a linux expert, sorry !
I'm experiencing problem in trying to compile LADSPA on the RaspberryPi B.
*My goal is to make convolution using Impulse Convolver with my own ir.*
I can install LADSPA and use it, including Impulse Convolver however, that
way it is not possible to use my own ir.
*So I'm trying to compile LADSPA.
But it doesn't work ???*
Which LADSPA plugin are you using? Because I think you only need to
recompile that specific plugin and not the complete LADSPA framework.
Jeremy
10:37 a.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Hello Jeremy,
I want to use https://github.com/swh/ladspa/blob/master/imp_1199.xml
But I want to use it with my own Impulse response.
I also see this message in Github which I have no clue what it means :
/Remove "inline" declarations for clang compilers/
https://github.com/swh/ladspa/commit/d07c1cbb2fd60a0a552982d58e0692994a1384…
Best regards,
Jean
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
11:56 a.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Hello I tried to compile plugins only, although I can't figure out how to
specify the desired plugin !
#1
wget http://plugin.org.uk/releases/0.4.9/swh-plugins-0.4.9.tar.gz
#2
tar -zxvf swh-plugins-0.4.9.tar.gz
#3
cd swh-plugins-0.4.9
#4
./configure --prefix=/usr
#5
make
Got same error :
/root@SheBe:~/swh-plugins-0.4.9# make
make all-recursive
make[1]: Entering directory '/root/swh-plugins-0.4.9'
Making all in m4
make[2]: Entering directory '/root/swh-plugins-0.4.9/m4'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/swh-plugins-0.4.9/m4'
Making all in po
make[2]: Entering directory '/root/swh-plugins-0.4.9/po'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/swh-plugins-0.4.9/po'
Making all in util
make[2]: Entering directory '/root/swh-plugins-0.4.9/util'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -O6
-fomit-frame-pointer -fstrength-reduce -funroll-loops -fmove-all-movables
-ffast-math -fPIC -DPIC -mcpu=armv6l -march=armv6l -MT rms.o -MD -MP -MF
".deps/rms.Tpo" -c -o rms.o rms.c; \
then mv -f ".deps/rms.Tpo" ".deps/rms.Po"; else rm -f
".deps/rms.Tpo"; exit
1; fi
gcc: error: unrecognized argument in option ‘-mcpu=armv6l’
gcc: note: valid arguments to ‘-mcpu=’ are: arm1020e arm1020t arm1022e
arm1026ej-s arm10e arm10tdmi arm1136j-s arm1136jf-s arm1156t2-s arm1156t2f-s
arm1176jz-s arm1176jzf-s arm2 arm250 arm3 arm6 arm60 arm600 arm610 arm620
arm7 arm70 arm700 arm700i arm710 arm7100 arm710c arm710t arm720 arm720t
arm740t arm7500 arm7500fe arm7d arm7di arm7dm arm7dmi arm7m arm7tdmi
arm7tdmi-s arm8 arm810 arm9 arm920 arm920t arm922t arm926ej-s arm940t
arm946e-s arm966e-s arm968e-s arm9e arm9tdmi cortex-a12 cortex-a15
cortex-a15.cortex-a7 cortex-a5 cortex-a53 cortex-a57 cortex-a57.cortex-a53
cortex-a7 cortex-a8 cortex-a9 cortex-m0 cortex-m0plus cortex-m1 cortex-m3
cortex-m4 cortex-r4 cortex-r4f cortex-r5 cortex-r7 ep9312 fa526 fa606te
fa626 fa626te fa726te fmp626 generic-armv7-a iwmmxt iwmmxt2 marvell-pj4
mpcore mpcorenovfp native strongarm strongarm110 strongarm1100 strongarm1110
xscale
gcc: error: unrecognized argument in option ‘-march=armv6l’
gcc: note: valid arguments to ‘-march=’ are: armv2 armv2a armv3 armv3m armv4
armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m
armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve
armv8-a armv8-a+crc iwmmxt iwmmxt2 native
gcc: error: unrecognized command line option ‘-fmove-all-movables’
Makefile:298: recipe for target 'rms.o' failed
make[2]: *** [rms.o] Error 1
make[2]: Leaving directory '/root/swh-plugins-0.4.9/util'
Makefile:1123: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/root/swh-plugins-0.4.9'
Makefile:730: recipe for target 'all' failed
make: *** [all] Error 2/
What I'am supposed to do, to make it working ?
Best Regards,
Jean
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
12:09 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Ok, I found how to compile one plugin only :
/gcc -o imp_1199.o -c imp_1199.c
ld -o imp_1199.so imp_1199.o -shared/
However I get an error :
*root@SheBe:~/swh-plugins-0.4.9# gcc -o imp_1199.o -c imp_1199.c
In file included from imp_1199.xml:48:0:
impulses/all.h:5:30: fatal error: impulses/01-unit.h: No such file or
directory
#include "impulses/01-unit.h"
^
compilation terminated.*
So this is where I'm stucked for now !
Best regards,
Jean
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
12:16 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Although I do have impulses dir and its content :
root@SheBe:~/swh-plugins-0.4.9# cd impulses
root@SheBe:~/swh-plugins-0.4.9/impulses# ls
01-unit.h 12-fender-superchamp-sm57.h
02-steves-flat.h 13-fender-superchamp-sm57-off.h
03-stk-m1.h 14-fender-superchamp-at4050.h
04-fender-68-vibrolux-sm57.h 15-fender-superchamp-ui87.h
05-fender-68-vibrolux-sm57-off.h 16-marshall-jcm2000-sm57.h
06-fender-68-vibrolux-at4050.h 17-marshall-jcm2000-sm57-off.h
07-fender-68-vibrolux-ui87.h 18-marshall-plexi-sm57.h
08-fender-bassman-sm57.h 19-marshall-plexi-sm57-off.h
09-fender-bassman-sm57-off.h 20-matchless-chieftain-sm57.h
10-fender-bassman-at4050.h 21-matchless-chieftain-sm57-off.h
11-fender-bassman-ui87.h all.h
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
1:55 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Hi Jean,
* bricolodu <jean.beauve(a)gmail.com> [2016-06-02 11:26]:
Hello,
I'm still not a linux expert, sorry !
I'm experiencing problem in trying to compile LADSPA on the RaspberryPi B.
*My goal is to make convolution using Impulse Convolver with my own ir.*
I am using jconvolver (by the great Fons Adriaensen) for this task,
provided you want to run it in realtime. You could try if there is such
a software package available for Raspbian.
best, Peter
1:59 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Thank you Peter,
I also use jconvolver + jack on Raspberry 3
But couldn't make it to work on Raspberry B
This is one of the reason why I tried with LADSPA that with the built in
filter works on Pi 1 (B)
Best regards,
Jean
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
2:40 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
* bricolodu <jean.beauve(a)gmail.com> [2016-06-02 15:59]:
Thank you Peter,
I also use jconvolver + jack on Raspberry 3
But couldn't make it to work on Raspberry B
This is one of the reason why I tried with LADSPA that with the built in
filter works on Pi 1 (B)
Alright, I can't offer to solve these problems, but
perhaps you want to
post the error descriptions for the RPI B and jconvolver here as well.
Have you looked at brutefir as well?
best, P
3:59 p.m.
New subject: Convolution with LADSPA Impulse Convolver on the Raspberry Pi B
Hello Peter,
Well, when I did the implémentation of jconvolver, I also tried BruteFir,
although, I could make it to work, it was more cpu hungry than jconvolver.
I have posted my other problem on an other threats.
Best regards,
Jean.
Le 2 juin 2016 16:40, "Peter P.-2 [via Linux Audio]" <
ml-node+s4202n100221h76(a)n7.nabble.com> a écrit :
* bricolodu <[hidden email]
<http:///user/SendEmail.jtp?type=node&node=100221&i=0>> [2016-06-02
15:59]:
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
Sent from the linux-audio-user mailing list archive at Nabble.com.
Thank you Peter,
I also use jconvolver + jack on Raspberry 3
But couldn't make it to work on Raspberry B
This is one of the reason why I tried with LADSPA that with the built in
filter works on Pi 1 (B)
Alright, I can't offer to solve these problems, but
perhaps you want to
post the error descriptions for the RPI B and jconvolver here as well.
Have you looked at brutefir as well?
best, P
_______________________________________________
Linux-audio-user mailing list
[hidden email] <http:///user/SendEmail.jtp?type=node&node=100221&i=1>
http://lists.linuxaudio.org/listinfo/linux-audio-user
------------------------------
If you reply to this email, your message will be added to the discussion
below:
http://linux-audio.4202.n7.nabble.com/Convolution-with-LADSPA-Impulse-Convo…
To unsubscribe from Convolution with LADSPA Impulse Convolver on the
Raspberry Pi B, click here
<http://linux-audio.4202.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=100213&code=amVhbi5iZWF1dmVAZ21haWwuY29tfDEwMDIxM3wyMDkzMzA4Nzk=>
.
NAML
<http://linux-audio.4202.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
2916
days inactive
2916
days old
linux-audio-user@lists.linuxaudio.org
9 comments
3 participants
participants (3)
-
bricolodu -
Jeremy Jongepier -
Peter P.