12 Dec
2014
12 Dec
'14
11:22 a.m.
On Fri, 12 Dec 2014 10:47:38 +0100, francois juigner wrote:
What I don't understand with my hdspmixer is that
it soesn't respond
to the clicks on thelabel lists... with you preset file, AN 1+2 and
phones checkboxes are selected when I click on the 2 left playback
panel channels but I can't change these settings ! the label changes,
but the checkboxes remain unchanged. I had this problem already
yesterday without preset loaded. So I wonder how I am going to do
without being able to write a preset file outside hdspmixer...
Correct, it's impossible to change this. In my demo file the submix
view is disabled. Check the submix view and after that you can select
the "label" and then use the faders for the submix. It should work for
analog, phones and ADAT 1+2, IIRC for S/PDIF too. I never tested
AES/EBU. It doesn't work for ADAT 3 to 8 on my machine.
Please, a few mails off-list are ok, but when sending a request to a
mailing list, it's better to provide the way to solve the issue to the
list too.
--
"Pull a Homer -- to succeed despite idiocy." - The Simpsons
12 Dec
12 Dec
12:14 p.m.
New subject: How to use hdspmixer - Was: RME HDSPe AIO, hdsploader compulsory ?
On Fri, 12 Dec 2014 11:21:53 +0100, Ralf Mardorf wrote:
On Fri, 12 Dec 2014 10:47:38 +0100, francois juigner
wrote:
PS: Once you used the submix faders, then you'll see that the checked
"labels" have changed. IOW every fader for a submix that isn't -∞ is
checked by the "labels". If submix faders are -∞, the "label"
isn't
checked. JFTR this also happens for ADAT 3 -8, there just isn't sound
by jackd available.
--
"Pull a Homer -- to succeed despite idiocy." - The Simpsons
What I don't understand with my hdspmixer is
that it soesn't respond
to the clicks on thelabel lists... with you preset file, AN 1+2 and
phones checkboxes are selected when I click on the 2 left playback
panel channels but I can't change these settings ! the label
changes, but the checkboxes remain unchanged. I had this problem
already yesterday without preset loaded. So I wonder how I am going
to do without being able to write a preset file outside hdspmixer...
Correct, it's impossible to change this. In my demo file the submix
view is disabled. Check the submix view and after that you can select
the "label" and then use the faders for the submix. It should work for
analog, phones and ADAT 1+2, IIRC for S/PDIF too. I never tested
AES/EBU. It doesn't work for ADAT 3 to 8 on my machine.
Please, a few mails off-list are ok, but when sending a request to a
mailing list, it's better to provide the way to solve the issue to the
list too.
3765
days inactive
3765
days old
linux-audio-user@lists.linuxaudio.org
1 comments
1 participants
participants (1)
-
Ralf Mardorf