5 Feb
2006
5 Feb
'06
6:44 a.m.
And the USB will not work with input. Jack will not even
start on full-duplex. Forget it, there is no point on
waisting time with it.
Victor
On Sun, 2006-02-05 at 02:23 +0000, Q wrote:
Have you checked in the JACK settings that the
card is
set to duplex rather than just playback? This happened
with my (admittedly PCI) Audiophile 2496 when I got it
recently. It had me stumped for a bit whilst my brain
caught up :-)
The USB and PCI version have absolutely nothing in common.
Lee
5 Feb
5 Feb
1:12 p.m.
New subject: [linux-audio-user] audiophile usb
Jack does start in full duplex, but there is not any input... I've been
messing
with it way too long. I'm going to find another card.
Has anyone used the Tascam US-122, it seems to have everything I need?
Jason
Victor Lazzarini wrote:
And the USB will not work with input. Jack will not
even
start on full-duplex. Forget it, there is no point on
waisting time with it.
Victor
On Sun, 2006-02-05 at 02:23 +0000, Q wrote:
Have you checked in the JACK settings that the
card is
set to duplex rather than just playback? This happened
with my (admittedly PCI) Audiophile 2496 when I got it
recently. It had me stumped for a bit whilst my brain
caught up :-)
The USB and PCI version have absolutely nothing in common.
Lee
1:20 p.m.
New subject: [linux-audio-user] audiophile usb
Jason Burchfield wrote:
Jack does start in full duplex, but there is not any
input... I've
been messing
with it way too long. I'm going to find another card.
Has anyone used the Tascam US-122, it seems to have everything I need?
Jason
I'm not sure, but I believe that the fact that jack starts in full
duplex (at least using qjackctl) doesn't mean it has succesfully open
the capture port. Have you read all the output messages?
Try to start it just with capture enabled. If it doesn't start it could
be a problem of permissions. In this case you should check reading
permission on your device.
c.
--
www.cesaremarilungo.com
Victor Lazzarini wrote:
And the USB will not work with input. Jack will
not even
start on full-duplex. Forget it, there is no point on
waisting time with it.
Victor
On Sun, 2006-02-05 at 02:23 +0000, Q wrote:
Have you checked in the JACK settings that the
card is
set to duplex rather than just playback? This happened
with my (admittedly PCI) Audiophile 2496 when I got it
recently. It had me stumped for a bit whilst my brain
caught up :-)
The USB and PCI version have absolutely nothing in common.
Lee
7:51 p.m.
New subject: [linux-audio-user] audiophile usb
Has anyone used the Tascam US-122, it seems to have
everything I need?
It runs here.
On a 2.6.14.6-rt, alsa 1.0.10-r2, gentoo.
Min Latency I get on a Laptop with Intel 82801DB/DBL/DBM Usb Controller is
10.7msecs. ( /usr/bin/jackd -R -P60 -p64 -r48000 -p128 -n4 )
It works like it should. I like the mic preamps.
Nico
--
Nicolai Beuermann mailto:mail@nico-beuermann.de
--
mailto: n.beuermann(a)web.de
6895
days inactive
6895
days old
linux-audio-user@lists.linuxaudio.org
4 comments
5 participants
participants (5)
-
Cesare Marilungo -
Christoph Eckert -
Jason Burchfield -
Nicolai Beuermann -
Victor Lazzarini