23 May
2005
23 May
'05
10:47 a.m.
Quoting Edward Barrow <edward(a)copyweb.co.uk>uk>:
I've got a Terratec DMX 6-fire card
(ice1712/envy24 chipset) running in
a headless box with no X; I control it from the commandline over ssh.
Does the box you command it from have X? You could then open the envy24mixer
from the remote machine to the X server running on the "client".
To enable X11 forwarding from the ssh client do:
ssh -X user@host
You might need to enable X11 in the server sshd config, in debian: add or
uncomment the line:
X11Forwarding yes
in /etc/ssh/sshd_config
Sampo
23 May
23 May
12:05 p.m.
New subject: [linux-audio-user] CLI mixer for envy24 cards?
Sampo Savolainen wrote:
Quoting Edward Barrow <edward(a)copyweb.co.uk>uk>:
I was rather hoping I wouldn't have to do this... I have a sinking
feeling that it won't be anything like as easy as your email suggests.
(which a quick test confirms: needless to say it didn't work first time!)
--
Edward Barrow
I've got a Terratec DMX 6-fire card
(ice1712/envy24 chipset) running in
a headless box with no X; I control it from the commandline over ssh.
Does the box you command it from have X? You could then open the envy24mixer
from the remote machine to the X server running on the "client".
To enable X11 forwarding from the ssh client do:
ssh -X user@host
You might need to enable X11 in the server sshd config, in debian: add or
uncomment the line:
X11Forwarding yes
in /etc/ssh/sshd_config
Sampo
4:16 p.m.
New subject: [linux-audio-user] CLI mixer for envy24 cards?
Edward Barrow schrieb:
Sampo Savolainen wrote:
well.... on my debian unstable home-machine, it was that easy.
two things:
a)i did not have to add or uncomment the line, but i had to change a
"no" to "yes" in that line.
if u just add the line w/ yes on beginning of the config file, this
probably won't work, if there is a line w/ "no" later.
b) has your System a base X system installed? you need @ least xlib and
base utilities.
perhaps u can install xterm, and then the dependencies will
automatically install the required packages.
c) if your network is secure (blah...), try the following:
1) on yr X machine, type "xhost +" in some terminal
2) on yr headless machine, type "export DISPLAY=192.168.1.2:0",
where 192.168.1.2 is yr X machines ip address
3) "xterm" or something.
yes, i know, this won't answer yr question, but anyway, i hpe it'll help
you.
-Tommy
Quoting Edward Barrow
<edward(a)copyweb.co.uk>uk>:
I was rather hoping I wouldn't have to do this... I have a sinking
feeling that it won't be anything like as easy as your email suggests.
(which a quick test confirms: needless to say it didn't work first time!)
I've got a Terratec DMX 6-fire card
(ice1712/envy24 chipset) running
in a headless box with no X; I control it from the commandline over
ssh.
Does the box you command it from have X? You could then open the
envy24mixer
from the remote machine to the X server running on the "client".
To enable X11 forwarding from the ssh client do:
ssh -X user@host
You might need to enable X11 in the server sshd config, in debian:
add or
uncomment the line:
X11Forwarding yes
in /etc/ssh/sshd_config
Sampo
7184
days inactive
7184
days old
linux-audio-user@lists.linuxaudio.org
2 comments
3 participants
participants (3)
-
Edward Barrow -
Sampo Savolainen -
tommy