Download from:
http://old.notam02.no/arkiv/src/?M=D
jack_capture
============
jack_capture is a program for recording soundfiles with jack. Its default
operation is to capture whatever sound is going out to your speakers into
a file. (But it can do a number of other operations as well...)
Changes 0.9.17 -> 0.9.19:
*Do not accept filename starting with "-" when filename is last argument.
*Added the "--filename"/"-fn" option to set filename not
as the last argument. Can also contain "-" as first character.
*Fixed colors a bit and removed a superfluous linebreak.
*Fixed segfault for missing values in commandline.
*Manually clear allocated memory instead of using calloc.
*Removed buffer-info line when recording to stdout.
*Removed printing of "continue recording" when writing the last overruns.
*Niceify the disk writing thread to -20 when more than half the buffer is used.
*Continously show buffer usage, total number of overruns and whether
the disk thread has high priority, in the console. Turn off by using
the -hdu option.
*Added option -dc to disable console update. (same as "-dm -hdu")
*Fancier colors.
*Removed "hepp".
*Made dB meter the default and replaced the -dB option with the -lm option.
*Made the console meter wider to fit the info line at the bottom.
Snd-ls
======
Snd-ls is a distribution of Bill Schottstaedt's sound editor SND.
(http://ccrma.stanford.edu/software/snd/)
Its target is people that don't know scheme very well, and don't want
to spend too much time configuring Snd. It can also serve
as a quick introduction to Snd and how it can be set up.
Snd-ls also serves as base code for the San-Dysth softsynth
(http://www.notam02.no/~kjetism/sandysth/) and the Snd-rt music
programming language (http://www.notam02.no/arkiv/doc/snd-rt)
Changes 0.9.8.16 -> 0.9.8.17:
*(read-enable 'positions) has been wrongfully
turned off for some time. Bactrace should work
again now. (This only affects people using
snd-ls for programming.)
Rollendurchmesserzeitsammler
============================
The Audio Rollendurchmesserzeitsammler is a conservative garbage collector
providing general ways to efficiently allocate and use memory
inside a realtime audio thread without having to manually free
it later.
Changes 0.0.1 -> 0.0.4
* Added support for iterior pointers. (Pointers which points inside
middle of allocated memory). Turned out Stalin depended on this,
plus that c compiler are free to store pointers in registers
and stack however they want, so it's better to be safe.
* Fixed header.
* Made it packagable. Write make and make install to install library file
and header files.
* Added the function tar_get_dynamic_roots_for(char *pointer,char **start,char **end).
This function requires the source for HBGC:
http://www.hpl.hp.com/personal/Hans_Boehm/gc/
* Note that there are ways to increase the execution speed
significantly, I just haven't had the time yet, so this update doesn't
contain all the changes I wished for.
Hi
rakarrack 0.2.0 is released
Changes:
New Effects:
Intelligent Harmonizer ( see http://rakarrack.wiki.sourceforge.net/Harmonizer
for details )
Musical Delay (see http://rakarrack.wiki.sourceforge.net/Musical+Delay for
details)
Cabinet Emulation using the ZynAddSubFx EQ engine.
WahWah adapted from ZynaddSubFx Dynamic Filter
Alienwah adapted from ZynaddSubFx AlienWah
AutoPan
NoiseGate based on the Steve Harris ladspa gate plugin.
- New widgets
- RGB Selection Color
- More MIDI controllable parameters
- Jack autoconnection selectable
- New Presets
- minor bugs fixed
http://rakarrack.sourceforge.net
Thanks
Josep
On behalf of the entire Rivendell development team, I'm pleased to announce
the release of Rivendell v1.0.0rc2. Rivendell is a full-featured radio
automation system targeted for use in professional broadcast environments. It
is available under the GNU General Public License. Changes in this release
include (from the NEWS file):
*** snip snip ***
Changes:
AMB-OS AMR-100 Receiver Support. Support has been added for importing
the 'Native MP2' format files generated by the Westport Communications
AMR-100 satellite receiver used by the AMB-OS system.
RDDbCheck Enhancements. Added a check for orphaned database tables to
RDDbCheck.
Timescaling Fixes. A bug has been fixed that affected the precision of
timescaling parameters when applied to long-form programs.
Temp File Cleanup. A bug has been fixed that was causing temporary files
to be left behind after manually posting audio to a podcast feed.
Database Update:
This version of Rivendell uses database schema version 159, and will
automatically upgrade any earlier versions. To see the current schema
version prior to upgrade, see RDAdmin->SystemInfo.
As always, be sure to run RDAdmin immediately after upgrading to allow
any necessary changes to the database schema to be applied.
*** snip snip ***
Further information, screenshots and download links are available at:
http://www.rivendellaudio.org/
Cheers!
|-------------------------------------------------------------------------|
| Frederick F. Gleason, Jr. | Chief Developer |
| | Paravel Systems |
|-------------------------------------------------------------------------|
| Be bold, and don't fear failure. Treat failure as a blessing, |
| because mediocre goals are poison. |
| -- Dan Goldin |
|-------------------------------------------------------------------------|
SLV2 is a library to make the use of LV2 plugins as simple as possible
for applications.
Changes this release:
- Reworked API to be more future-proof and support plugin ports of
various types (e.g. not just float ala LADSPA).
- Various performance improvements (extreme improvements with a recent
enough version of redland/librdf)
- Support for 'scale points' (e.g. combo box ports)
- Support plugins with binaries in locations other than the top level of
the plugin bundle
- Support for new generic LV2 events (replaces old MIDI) in bundled
hosts
- Several bug fixes
- Other things I forget
Upgrading (and, for developers, updating code to the new API) strongly
recommended.
Source available at http://drobilla.net/software/slv2
Packages for amd64 Debian unstable are available, for details see:
http://wiki.drobilla.net/Debian
Enjoy,
-Dave Robillard
Patchage is a graphical modular patch bay for audio/MIDI systems
based on JACK, LASH, and ALSA.
This release fixes several bugs, and adds support for the new Jack D-Bus
control interface. Two libraries which Patchage depends on are also
released in parallel: raul 0.5.0 and flowcanvas 0.5.0.
Upgrading is recommended.
More information, screenshot, downloads, etc. available at:
http://drobilla.net/software/patchagehttp://drobilla.net/software/raulhttp://drobilla.net/software/flowcanvas
Packages for all 3 projects are available for amd64 Debian unstable, for
details see:
http://wiki.drobilla.net/Debian
Enjoy,
-Dave Robillard
jack_capture
============
jack_capture is a program for recording soundfiles with jack. It's default
operation is to capture whatever sound is going out to your speakers into
a file, but it can do a number of other operations as well.
Normal URL:
http://www.notam02.no/arkiv/src/?M=D
Note that the above link doesn't seem to currently work
because of something which seems to be www upgrade
at Notam. But this link does seem to work for now:
http://old.notam02.no/arkiv/src/?M=D
0.9.10 -> 0.9.17:
-----------------
*Made sure the process thread won't continue sending
data when jack_capture is told to quit. This
led to a race conditions when recording too many channels
at once (which was 256 channels on my machine).
*Added the jack_capture_gui script, based on code
by Svend-Erik Kjær Madsen's.
*Replaced sh by bash to make it work in ubuntu.
*Fixed exact port name match and gen_setformat. Thanks to
Gabriel J.L. Beckers for reporting the bugs.
*Increased the time the console meter is displayed in red from
50ms to 2000ms. (when the recorded jack value is equal to or
higher than 1.0.)
*Added the -dBr argument to specify reference level when using
the console dB meter.
*Added the -mr argument to specify reference level when using
the meterbridge meter.
*Added peak indicators to the console meter. Code to do so taken
from meterbridge by Steve Harris.
*Updated --help and README with the new options.
*Added option "-mt" to change meterbridge type. Current valid
options are vu (default), ppm, dpm, jf or sco. It's not necesarry
to specify "-mb" if using "-mt".
*Added option "-dB" to get a dB meter for the console meter.
*Added examples how to record ogg and mp3 files using the -ws option.
*Decreased default buffersize from 60 to 20 seconds.
(I even had trouble provocing underruns using a minimal
0.05 seconds long buffer, so 60 seconds was obviously overkill)
*Fixed message and error printing to stderr when
vu meter is running.