Linux-audio-user

linux-audio-user@lists.linuxaudio.org

3 participants
20662 discussions

RE: [linux-audio-user] Starts with a pop

by Reuben Martin

>This is something that has bugged me ever since I built my Linux DAW. > When I boot up, when I start jack, when I open a web page with >Flash, when I get a licq message -- anything that uses my audio >driver, I hear a fairly loud low-end pop. > >Is this common? Is it a known issue I can fix? I figure it's a >problem somewhere in the following (backwards) chain: I get this as well (DA converter -> RME DIGI9632-PAD SPDIF out -> ALSA -> JACK) But it only happens the first time I start Jack, after that it doesn't do it anymore _unless_ I change which device on the card is being used by JACK. My guess is that devices on sound cards have a default sample rate, bit rate or some other type of setting and when something accesses the device and changes one of those settings, it results in that pop sound. -Reuben

21 years, 1 month

[linux-audio-user] [ANN] Specimen v0.4.4

by Pete Bessman

Normally, I don't announce minor releases, but this is an exception. The latest Specimen has a completely redone GUI, which I hope will make using it suck a whole lot less. Downloads: www.gazuga.net/downloads.php Screenshots: www.gazuga.net/screenshots.php This version of Specimen also relies on PHAT, so be sure you have the latest version (0.2.2). PHAT: www.gazuga.net/phat.php This is a relatively ambitious endeavor, so please inundate me with bug reports. And yes, MIDI control is coming really, really soon. Seriously. --Pete

21 years, 1 month

[linux-audio-user] Is everyone sick of interrupts yet?

by brad stafford

I just tonight switched from the Planet CCRMA RH9 to FC1. The install was purely from the CDROMs dated 4/25/2004. I've seen all the latest posts about interrupts and did the required reading on the internet. I really managed to get RH9 cleaned up but in FC1 I'm seeing something a little different. I have a Delta 1010 and I'm running an AMD Barton 2.6 with 5 PCI slots. The question is what the heck are IRQ 16 and 22? I moved the sound and ethernet cards around to get them to 16 and 22 as they used to be eth0 on 21 and ICE1712 on 22. I have ACPI turned off as a service but don't have a "disable" option in the BIOS. I did turn off USB support in the BIOS. Is 16 like the equivalent of IRQ 3 since it's following 15? [brad@mars brad]$ cat /proc/interrupts CPU0 0: 81690 IO-APIC-edge timer 1: 75 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 1 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 836 IO-APIC-edge PS/2 Mouse 14: 10789 IO-APIC-edge ide0 15: 735 IO-APIC-edge ide1 16: 0 IO-APIC-level ICE1712 22: 21 IO-APIC-level eth0 NMI: 0 LOC: 81633 ERR: 0 MIS: 0 I'm getting 5.8 msec latency in JACK with 128 frames/period at 44100 and 2 periods/buffer. A huge improvement over the 46.1 msec using RH9 with capabilities. Thanks, Brad.

21 years, 1 month

[linux-audio-user] USB center channel

by bryce

Hi all, I tried a couple of months ago to get USB sound working( headset + mic). And during the system bootup, the headset would work as headphones( unitl i unplugged the device). But not the mic. Does usb sound even including handling mic info? And if so, does alsa need any extra configuration to get this working? thanks in advance, bryce

21 years, 1 month

[linux-audio-user] Re: Snd (was DAW dilemma)

by Bill Schottstaedt

It seems to me you could use the "save state" options, always working from the "edit history" (i.e. the program that describes the changes you made at various points). You'd still have various in-between takes, but they'd be handled automatically by Snd; your originals would never be touched, and you could backup to any point in the sequence. I didn't realize this was a stumbling block -- will look at it more closely -- perhaps all it needs is better documentation.

21 years, 1 month

[linux-audio-user] Multiple instances of Jamin

by Reuben Martin

I'm looking for a way to run multiple instances of Jamin. The purpose behind this is that I want to use Jamin as an insert with different settings for two separate busses in ardour, but Jamin segfaults when there is already an instance running. I already tried to make a copy of Jamin under a different name but with the same results. Any suggestions would be helpful. Thanks, Reuben

21 years, 1 month

RE: [linux-audio-user] Multiple instances of Jamin

by Reuben Martin

>Well, you're *supposed* to use the -n option to set a different client >name for the second instance. But, it looks like the new OSC control >logic is crashing trying to open the same control port. > >When I try it I get... > > $ jamin -n metoo > jamin 0.9.03 > (c) 2003 J. Depner, S. Harris, J. O'Quin, R. Parker and P. Shirkey > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details. > liblo server error 9904 in path (null): cannot find free port > Segmentation fault > >Is that what you're seeing? Yes. I've tried with and without the -n option to set a different client name and that is exactly what I am seeing. (and I am also using 0.9.03 as well) >Building jamin with `./configure --disable-osc' might work. I can't >say for sure. My system can't comfortably run multiple instances, so >I haven't tried it in ages. > >Meanwhile we need to debug that segfault. I will try that and see if it helps. Thanks. -Reuben

21 years, 1 month

[linux-audio-user] Sample Rate Conversions (was: Converting sample rate: failed...)

by davidrclark＠earthlink.net

Was: Converting sample rate: failed... Erik, Regarding your recent post on this subject: > Funnily enough the issue you see as a "serious misconception" I see > as a "significant advantage of libsamplerate over your converter". [0] > [0] You claim that the highly localized behavior of the truncated > windowed sinc is a bad thing. I claim that this localization is > a good thing for converting a general digital audio signal because > these signals are already highly localized (ie snare drum hit at > 10.03 seconds from the start). From your description, your > converter spreads these highly localized events over the whole > of the output signal which I think is a bad thing. ----------------------------------------- This is absolute nonsense. Your misconception is even more deeply rooted than I had thought. You are obviously missing some theoretical background I had assumed you had. If you had had this background, you probably wouldn't have written the rest of your post, in addition to not having posted this nonsense. You mentioned an interest in certain characteristics of the resampling method I'm using. Either do the analysis or do the literature research. I've already told you everything you need to know: FFT with and without overlap; overlap accomplished with raised cosine windows. Only someone who is utterly clueless would insist on obtaining my code for measurements. (And only someone who is very immature would characterize this standard advice as "hot air" before they even saw it.) Good luck, Dave.

21 years, 1 month

[linux-audio-user] Dodgey issues with my Delta 1010LT

by Glenn McCord

I'm stumped. I have two problems 1. I can never get two sound processes to work at once. If I have xmms running, jack will refuse to start with this error ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Device or resource busy the playback device "hw:0" is already in use. Please stop the application using it and run JACK again cannot load driver module alsa This shouldn't happen because the sounblaster can do it fine 2. And the weirdest thing of all. All the playback of music is too fast! I'm sure of it. All my mp3s are seemingly playing ever so slightly to0 fast so that the pitch is raised and it sounds crazy. It seemed so odd that I timed an mp3 with my stop watch and on the player it says that it runs for 4min 05s when in reality it runs for 3min 48s . That kind of difference is not a good thing. The playback is also stuttery at times which is totally unusual for my system. Seriously, Avril Lavigne doesn't sound that great at increase speed. I could really do with some help. Glenn

21 years, 1 month

[linux-audio-user] xf86config no_accel = yes but sucks bad

by R Parker

Hey, In the ongoing attempt to eliminate xruns, I've set Option "no_accel" "yes" in the XF86Config. Watching the screen redraw is like a valume overdose. I've done this without really knowing why it will help or whether it has. Assuming that it has helped, I probably have to live with it. I am using Planet CCRMA with KDE and have a runlevel for Desktop work and another for audio work. I boot into runlevel 5 and then use telinit to switch to 3. Is it possible to specify xf86config files for each of these runlevels? Or is there another method for a user to turn acceleration on and off? Is anyone else turning off acceleration and how do you deal with the performance? ron __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

21 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user