Wednesday 26 November 2003 11.36 skrev Daniel James:
> > I think the live 512 has the same drivers as the audigy,
>
> No, it uses the emu10k1 driver, which I think is pretty well tried and
> tested:
>
> http://www.alsa-project.org/alsa-doc/
Ahh, there is a new one... last time I tried it was the same (I own one of
each)... The Audigy driver is probably forked of the emu10k then...
But... it looks like the entries all point to 'emu10k1'.
I do still stand by my claim though, even if there is a new driver... what
applies to the Audigy most certainly applies to the Live. (I even think I
have experienced this with the Live)
Live has a chip called emu10k
Audigy has a chip called emu10k2 (or something similar)
They are in many respects the same, and that goes for the drivers also.
/Robert
> I think I saw this error myself, but wine worked fine afterwards.
> Can you install the vstserver?
Yes, but wher vstserver tries to open a plugin, i have same error loops as wine
installation.
See ya
k.s.matheussen at notam02.no :
> I didnt understand that. What is happening at which configuration
step?
to avoid mistakes, i've uninstalled wine with make uninstall. then I've
installed wine version suggested following this steps:
1)
tar xvfj vstserver-0.2.7-wine.tar.bz2
cd wine
./tools/wineinstall
2)
Configure finished. Do 'make depend && make' to compile Wine.
We need to install wine as root user, do you want us to build wine,
'su root' and install Wine? Enter 'no' to continue without installing
(yes/no)yes
3)
Wine build complete.
Performing 'make install' as root to install binaries, enter root
password
Password:
4)
Found existing /home/axiom/.wine/config, do you want to overwrite this
existing Wine configuration file?
(yes/no) yes
Would you like to make a backup of this old config file?
(yes/no)no
Searching for an existing Windows installation... not found. (no
matching /etc/fstab mount entry found)
Windows was not found on your system, so I assume you want
a Wine-only installation. Am I correct?
(yes/no)yes
Configuring Wine without Windows.
5)
Some fake Windows directories must be created, to hold any .ini files,
DLLs,
start menu entries, and other things your applications may need to
install.
Where would you like your fake C drive to be placed?
(default is /home/axiom/c)
Configuring Wine for a no-windows install in /home/axiom/c...
Created /home/axiom/.wine/config using default Wine configuration.
You probably want to review the file, though.
Compiling regedit...
make: Nothing to be done for `all'.
Preparing to install default Wine registry entries...
Installing default Wine registry entries...
wine: Unhandled exception (thread 0009), starting debugger...
wine: Unhandled exception (thread 000b), starting debugger...
wine: Unhandled exception (thread 000d), starting debugger...
[loop here]
when I press ctrl+c to stop it, I get:
err:seh:EXC_DefaultHandling Unhandled exception code c000013a flags 0
addr 0x402c76c6
err:seh:EXC_DefaultHandling Unhandled exception code c000013a flags 0
addr 0x402c76c6
err:seh:EXC_DefaultHandling Unhandled exception code c000013a flags 0
addr 0x402c76c6
err:seh:EXC_DefaultHandling Unhandled exception code c000013a flags 0
addr 0x402c76c6
Registry install failed.
Luca
axiom(a)sphereserver.sm:
>
> Hi all. I'm trying to get VST plugins run under linux (a RH9 with Planet
> CCRMA, kernel 2.4.22-6.ll.rh90).
>
> I've followed those steps:
>
> - downloaded wine 20031118
> - downloaded vstserver-0.2.8 (ladspavst too)
>
> - i've installed wine simply untar it, then ./wineinstall
> - i've compiled vstserver and ladspavst following their instructions
>
> - i've correctly set VST_PATH (if i do "cd $VST_PATH" it brings me to
> correct folder)
>
> Now, when I run vstserver, then open a sound application (Audacity, in
> example), i'll get this error:
>
> VSTSERVER/main: Vstserver 0.2.8 started. Waiting for requests.
> VSTSERVER/main: Going to try to start vst plugin "DFX Transverb.dll".
> wine: Unhandled exception (thread 0009), starting debugger...
> WineDbg starting on pid 8
> Loaded debug information from ELF 'wine' ((nil))
> No debug information in 32bit DLL 'F:\vstserver-0.2.8\vstservant'
> (0x40730000)
> No debug information in 32bit DLL 'NTDLL.DLL' (0x401c0000)
> No debug information in 32bit DLL 'KERNEL32.DLL' (0x40440000)
> Unhandled exception: page fault on read access to 0x409ffd80 in 32-bit
> code (0x4000c239).
> In 32-bit mode.
> 0x4000c239 (_end+0x400a40d): movl 0x0(%eax),%eax
> Wine-dbg>WineDbg terminated on pid 8
>
I'm surprised you got the latest wine version to work with the vstserver,
I didn't think it should work. Have to check it out.
> i've even tried with a wine version suggested by INSTALL of vstserver,
Yes, thats what you should do. :)
> but when it try to do last configuration step (next make, when it tries
> to write the first registry entries), wine going in a debug loop and no
> programs starts, even regedit.
>
I didnt understand that. What is happening at which configuration step?
--
I am currently working on a 'no-compilation, no-installation,
no-programming' user manual for Alsa-Jack-Ladspa.
I wanted to bring some friends of mine to Linux. They use Windows based
music software, so i intended to do some introduction (in spanish) to the
capababilities of Alsa-Jack-Ladspa(-Ladcca?) arquitecture for final users.
Due to the initial intent I did it in Spanish. Now it seems language was a
wrong choice. Most related documentation is full of programming and
installation details and I think that it is a globally needed
documentation. So i plan to do it more general and translate it but only
after the structure would get some degree of stability.
The current (Spanish) draft is located at:
http://www.salleurl.edu/~is04069/Modders/Docs/alsadoc.html
Most mature sections are 'General arquitecture', 'Sequencer' and 'Config
files syntax'. Maybe, some alsa hacker who undestand Spanish (Jordi?
Nando?) could review them. I have lot's of questions, since i had to
figure out a lot of things from code or from proposals (which i don't know
if they finally get implemented as explained). But I will ask those
questions only to the developers lists. That's the correct audience by
now, isn't it?
--
David GarcÃa Garzón
(Work) dgarcia at iua dot upf anotherdot es
(Home) vokimon at telefonica adot net
http://www.salleurl.edu/~is04069
Hi all. I'm trying to get VST plugins run under linux (a RH9 with Planet
CCRMA, kernel 2.4.22-6.ll.rh90).
I've followed those steps:
- downloaded wine 20031118
- downloaded vstserver-0.2.8 (ladspavst too)
- i've installed wine simply untar it, then ./wineinstall
- i've compiled vstserver and ladspavst following their instructions
- i've correctly set VST_PATH (if i do "cd $VST_PATH" it brings me to
correct folder)
Now, when I run vstserver, then open a sound application (Audacity, in
example), i'll get this error:
VSTSERVER/main: Vstserver 0.2.8 started. Waiting for requests.
VSTSERVER/main: Going to try to start vst plugin "DFX Transverb.dll".
wine: Unhandled exception (thread 0009), starting debugger...
WineDbg starting on pid 8
Loaded debug information from ELF 'wine' ((nil))
No debug information in 32bit DLL 'F:\vstserver-0.2.8\vstservant'
(0x40730000)
No debug information in 32bit DLL 'NTDLL.DLL' (0x401c0000)
No debug information in 32bit DLL 'KERNEL32.DLL' (0x40440000)
Unhandled exception: page fault on read access to 0x409ffd80 in 32-bit
code (0x4000c239).
In 32-bit mode.
0x4000c239 (_end+0x400a40d): movl 0x0(%eax),%eax
Wine-dbg>WineDbg terminated on pid 8
i've even tried with a wine version suggested by INSTALL of vstserver,
but when it try to do last configuration step (next make, when it tries
to write the first registry entries), wine going in a debug loop and no
programs starts, even regedit.
Now, i'm totally stuck. Sacrifing my dog in a full moon night and sell
my soul to Stallman never gave me better results. Perhaps you? :)
Thx in advance,
Luca
Hi all. I'm trying to get VST plugins run under linux (a RH9 with Planet
CCRMA, kernel 2.4.22-6.ll.rh90).
I've followed those steps:
- downloaded wine 20031118
- downloaded vstserver-0.2.8 (ladspavst too)
- i've installed wine simply untar it, then ./wineinstall
- i've compiled vstserver and ladspavst following their instructions
- i've correctly set VST_PATH (if i do "cd $VST_PATH" it brings me to
correct folder)
Now, when I run vstserver, then open a sound application (Audacity, in
example), i'll get this error:
VSTSERVER/main: Vstserver 0.2.8 started. Waiting for requests.
VSTSERVER/main: Going to try to start vst plugin "DFX Transverb.dll".
wine: Unhandled exception (thread 0009), starting debugger...
WineDbg starting on pid 8
Loaded debug information from ELF 'wine' ((nil))
No debug information in 32bit DLL 'F:\vstserver-0.2.8\vstservant'
(0x40730000)
No debug information in 32bit DLL 'NTDLL.DLL' (0x401c0000)
No debug information in 32bit DLL 'KERNEL32.DLL' (0x40440000)
Unhandled exception: page fault on read access to 0x409ffd80 in 32-bit
code (0x4000c239).
In 32-bit mode.
0x4000c239 (_end+0x400a40d): movl 0x0(%eax),%eax
Wine-dbg>WineDbg terminated on pid 8
i've even tried with a wine version suggested by INSTALL of vstserver,
but when it try to do last configuration step (next make, when it tries
to write the first registry entries), wine going in a debug loop and no
programs starts, even regedit.
Now, i'm totally stuck. Sacrifing my dog in a full moon night and sell
my soul to Stallman never gave me better results. Perhaps you? :)
Thx in advance,
Luca
Hi All,
I'm trying to get my M-Audio Quattro to work as a second device in
addition to my SoundBlaster Live! I'm using ALSA 0.9.6 and have managed
to get them both to work. I am using Patrick Shirkey's asound.conf,
however i can only seem to use the quattro as devices quattro1 and
quattro2. Jack fails with any other settings that are defined in
asound.conf. I've compiled Patrick's qinit program but it segfaults.
My asound.conf is:
# quattro1 is pcm0 which has a maximum sample rate of 44100 and 16 bit
stereo
pcm.quattro1 {
type hw
card 0
device 0
}
ctl.quattro1 {
type hw
card 0
}
# quattro2 is pcm1 which has a maximum sample rate of 96000 and 24 bit
stereo
pcm.quattro2 {
type hw
card 0
device 1
}
ctl.quattro2 {
type hw
card 0
}
# quattro2 is pcm2 which has a maximum sample rate of 96000 and 24 bit
stereo
pcm.quattro3 {
type hw
card 0
device 2
}
ctl.quattro3 {
type hw
card 0
}
#----
#
# compose 4 channels from two channel x two devices, hw:2,1 and hw:2,2
# assuming that hw:2,1 and hw:2,2 give the same condition, 24_3LE/96k
#
pcm.quattro {
type multi;
slaves.a.pcm "hw:0,1";
slaves.a.channels 2;
slaves.b.pcm "hw:0,2";
slaves.b.channels 2;
bindings.0.slave a;
bindings.0.channel 0;
bindings.1.slave a;
bindings.1.channel 1;
bindings.2.slave b;
bindings.2.channel 0;
bindings.3.slave b;
bindings.3.channel 1;
}
ctl.quattro {
type hw;
card 0;
}
#
# remap 4 channels as interleaved.
# use plug instead of route here, since 24_3LE is unlikely supported by
# applications.
#
# arecord -r 44100 -c 4 -f s16_le -D q4 -d 5 /home/xxx/q4.wav
pcm.q4 {
type plug;
slave.pcm "quattro";
ttable.0.0 1;
ttable.1.1 1;
ttable.2.2 1;
ttable.3.3 1;
}
ctl.q4 {
type hw;
card 0;
}
#
# Use route plugin for applications that do support 24_3LE
# This lowers latency which the plug plugin introduces due to
resampling.
#
# arecord -r 44100 -c 4 -f s16_le -D q41 -d 5 /home/xxx/q41.wav
pcm.q41 {
type route;
slave.pcm "quattro";
ttable.0.0 1;
ttable.1.1 1;
ttable.2.2 1;
ttable.3.3 1;
}
ctl.q41 {
type hw;
card 0;
}
#----
pcm.emu10k1 {
type hw
card 1
}
ctl.emu10k1 {
type hw
card 1
}
and my modules.conf is:
# START
alias char-major-116 snd
alias char-major-14 soundcore
# Quattro
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# SBLive
alias sound-slot-1 snd-card-1
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
alias snd-card-0 snd-usb-audio
options enable=1
alias snd-card-1 snd-emu10k1
options snd-emu10k1 extin=0x3fc3 extout=0x1fff enable_ir=1
Is there anything I am obviously doing wrong. Any help would be
appreciated.
Cheers,
Adam