Hi all,
I have got the second alpha release coming on Sunday.
Audio* is a project to create real-time music software as Open Source. I
announced the project a week ago. http://audiostar.sourceforge.net
There is plans to make a Reason-like program next for Linux. I have
moved to Linux for good. I don't even notice I am using it anymore,
there's no differece between using Linux or Windows to me anymore,
except one is free and get's better latency.
Tekno Composer is a copy of Rebirth without copying it. (A project named
Reborn tried and was pulled because of copyright problems). Tekno
Composer features a Silver Mojo synthesizer, a 16-voice polyphonic drum
and sample stack wavetable synthesizer, and a demented Loop machine I am
still having problems getting to sync properly but should be fixed by
release tommorow.
It is just as good as Rebirth almost (it needs features still not
implemented). I have plans to make a Rebirth file loader so you can
listen to Rebirth files on Linux since Propellerheads never supported
Linux in any way, although it will not be able to play them exactly the
same as Rebirth (remember it's not a clone of Rebirth, it is just an
alternative that sounds pretty close to it *snicker*, I think it's
better than a 303... more toys to play with).
Silver Mojo is a monophonic, 3 oscillator synthesizer with plenty of
features and toys to make cool sounds. It was more or less designed to
copy a SH-9, an M-100, Korg MS-20, and Mini Moog, but with a step
sequencer like a 303. That is why there are 3, and one is label SUB but
you can make it up to 2' pitch if you want. It has two LFOs which can be
synced to the tempo. One goes to the oscillators (PWM and Vibrato) and
one goes to the filter. It also has Tremolo and Ping/Pong panning which
will be syncable to the tempo soon; I am real busy on other stuff right
now. It has all the basic F/X pedals you could want, and one custom Quad
Chorus I created which is a multi-tap chorus box and sounds very fat. It
has a 64-step sequencer, like a 303, but a little different. It is not
an emulator, and does not intend to be one, because most projects that
copy Roland gear or Rebirth get into trouble with them.
The drum machine is a 16-voice 16-stack polyphonic wavetable
synthesizer. With some more work it will be a synthesizer in it's own,
much like the stacking synths of the 80's, except you can use any wave
form, not just a period of a wave in it. You do not really need to use
it as drum machine if you load other samples in it. It is very much like
an 808/909 programming wise, 16-step sequencer. Right now it uses a very
primitive text file to load the samples... but in the future it will be
an XML file format.
The Loop machine (will) allow you to sync samples/loops to the drum
machine beat. You can loop or do one-shot synced to a step on the drum
machine. It also has a barbaric text file to load the samples. That too
will be XML in the future. I can only do so much in a weekend.
It should run on a P2-450 but I have only tested it on a P4 2.0 and a P3
550 so far. The goal is for it to run on a Pentium Pro 200 Dual system
as the base line. It is not designed for speed but for the highest
quality sound possible that I can figure out. I do not have oversampling
enabled yet it is not fast enough for it.
You will need FLTK 1.1.X and Port Audio v18. I have an ALSA driver in
there, but I have not confirmed it works yet it is a rip from my other
project. There will be Jack drivers as soon as I can get Jack to startup
as a daemon on my system.
It is still Alpha and not all of the program has been implemented yet.
The project could use one dedicated programmer to help implement
features. I can only do so much at a time by myself.
Although Rebirth isn't any big deal now, I wouldn't feel complete if I
didn't build a program that could mimic it without infriniging on
copyrights in any way :)
I'd like to thank Julius Orion Smith from CCRMA for all of his papers,
and Tom Stilson for analyzing the Moog VCF transfer function, and Perry
Cook for STK. It took about 6 months of intense reading of them ( I read
the BLIT paper 100 times), but I learned alot and because of that I was
able to make a program like this. I thought it was fun, but frustrating
at times, getting to the point I could make something cool with all that
technical information. Even though I've been programming for 10 years I
didn't know alot about DSP and DSP is not something you learn in an
afternoon (unless you are a super-genius type). So many thanks to the
awesome people who took the time to explain the math and formulas, and
also thanks for Music DSP for the many code snippets. Also I'd like to
thank Alex (something) who made the DigiFX, where I learned how to code
many of the sound F/X. Big thanks and much gratitude to you all. I hope
I can return some cool stuff in exchange for that knowledge. That's the
reason I am making it Open Source and free to say thanks for teaching
me.
Thanks list!
--
Nick <nicktsocanos(a)charter.net>
Steve,
Just wondering how things are progressing on your app for mastering sounds?
I have lost the thread where you explained what you eventually intend to
provide. Could you give me a basic idea again please?
--
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.comHttp://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
Hi.
I released ZynAddSubFX 1.2.1, a powerfull synthezier
for Linux and Windoze.
Get it from:
http://zynaddsubfx.sourceforge.net/
News:
- improved filter interpolation
- bugfix: wav header is written correctly
- bugfix: NRPN works correctly (eg:the
controller was 0x98 instead of 98), now you can
controll all effects parametrer realtime via MIDI
- bugfix: pitch bend works OK in windows
- added master fine detune (-64..63 cents)
- it is possible to swap effects or copy them
- started to port ZynAddSubFX to VST (not
functional, yet)
- the resonace can protect the fundamental freq.
against damping
Paul.
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
Hi Group,
I am thinking of buying a notebok or subnotebook. However I don't know
which one to get?
Here are some requirements the notebook should meet:
1. Runnable with Linux (of course!)
2. Reasonable sound support (recording and playback at least)
3. jack and adour should be able to run
4. WLAN (either build in or via PC-Card)
What notebooks do you use? What are your experiences?
Any help or advice is appreciated.
r(a)l.f
Dear all,
Just a quick introduction before I get to the problem.
I have a lot of Windows experience of one sort and another, upon which I
develop in Python. I'm new to Linux. I veiw make , kernels ,device
drivers with a fair degree of trepedation.
I have a Roland UA-100 which worked correctly on this machine using
Win2K. I have cleaned windows off the machine and loaded Mandrake 9.0
and have been attempting to work through
http://www.michaelminn.com/linux/usbua100/README.html
I have altered the make files and loaded up Motif et al. and the file
now make and make install run with no errors.
Upon restarting the machine I find in /var/log/syslog
/lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
unresolved symbol unregister_sound_dsp
/lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
unresolved symbol unregister_sound_midi
/lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
unresolved symbol register_sound_dsp
/lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
unresolved symbol register_sound_midi
modprobe: insmod
/lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o failed
I'm a bit stumped here because I don't understand how the .o file can be
prduced if there are un-resolved sysmbols.
I also notice I have no audio facilites listed in the Mandrake Control
Centre. Does this machine believe it has no audio, and could somebody
please elaborate if at all possible?
chris lyon
hi all
just wondering if anyone here is using a dell latitude cpx and if there
are any issues installing linux on it?... or any known sound config issues?
i am lamenting the sad demise of my thinkpad which blew a gasket last
night :-(((. actually its going to be fine, its just the power socket
has worked itself loose or blown a fuse (i.e. it boots fine from the
battery which is by now very flat).
so i had to get a new machine today... gasp! wasnt planning on that
right away but as im writing a book, i've gotta keep working! the plan
is to wait until my friend who knows how to repair the power socket is
back from the USA.
other issue i'm wondering about is installing linux alongside windows
(barf!) xp... ughh... i swore i'd never use XP but its come pre
installed. borg edition, yuck.... but i need it for work.
so i'm thinking maybe with xp being so difficult, running lnx4win might
be an idea, but would this be more demanding on system resources?
i'd like to partition the drive but im not sure how to go about this on
XP... yuk yuk yuk... win2k was easy enough though.... *sigh*....
any ideas muchly appreciated :)
bw & thanx
m~
--
|\ _,,,---,,_
ZZZzz /,`.-'`' -. ;-;;,_ HTTP 503: Too Busy
|,4- ) )-,_. ,\ ( `'-'
'---''(_/--' `-'\_) fL
.::. www.iriXx.org .::. www.copyleftmedia.org.uk .::.
gnupg key ID: AEB7A31E
Hi,
I want to make audio CDs which are playable in hifi CD players. I wish
to burn in steps, yet have the CD playable before final fixation. So
far I have made a lot of coasters. How would the command line read in
order to achieve my goal?
cdrecord -multi speed=4 dev=0,0,0 *.wav
cdrecord -nofix speed=4 dev=0,0,0 *.wav
these will burn a CD which isn't recognised by my hifi CD player until
cdrecord -fix dev=0,0,0
Fixes the disk and allows playing of tracks, allows further burns but
these are not accessible by the CD player as the toc doesn't identify them.
Sadly I am able to create such disks on windoze with Easy CD Creator.
If cdrecord cannot allow this, what is the difference? I'm using
version 1.1.
TIA, Tim
Hi all list people,
I just got myself a nice Digi96/8, and compiled alsa drivers.
Works fine, but it's just doing spdif, I don't know how to make a asound.conf to put it on ADAT, which is what I want, because I want 8 in stead of 2 channels.
I cannot find any adat related asoundrc options on the alsa support pages, but I did saw someone named 'Olaf Titel' in the archives of this list who was using ADAT with alsa, linux and ecasound, which is exactly what I want.
Does anyone here have adat with RME Digi96/8 working with alsa?
Cheers,
Jeroen.
Hi all, I'm searching a replacement for a program like EMagic SoundDiver.
What I need is a simple app for storing and editing the presets of the POD.
Any suggestion?
Thanks!
--
Alessandro <Comix> Cominu
http://hydrogen.sf.net
e-mail: comix(a)despammed.com
Icq: 116354077
Linux User # 203765
[...Codito Ergo Sum...]
