Hi all,
After the LAD Conference and using apps which used the lrdf taxoomy
(putting plugins into categories) code it became obvious the the current
taxonomy wasn't really useful.
the current taxnomy looks like:
Utilities
Generators
Oscillators
Simulators
Reverbs
Time
Delays
Phasers
Flangers
Chorus
Reverbs
Frequency
Measurement
Filters
Lowpass
Highpass
Bandpass
Combs
Allpass
EQs
Parametric
Multiband
Pitch shifters
Amplitude
Amplifiers
Waveshapers
Modulators
Distortions
Dynamics
Compressors
Expanders
Limiters
Gates
This makes a certian amount of sense from a theoretical point of view, but
isn't much use when you're trying to find a compressor.
So, we need to deine a taxonomy that is more useful to users.
I recon that something like this is a good start, but feedback would
really help:
Utilities
Generators
Oscillators
Delays
Phasers + Allpass
Flangers
Chorus
Reverbs
Filters
Lowpass
Highpass
Bandpass
Combs
EQs
Parametric
Multiband
Pitch shifters
Modulation
Distortion
Amp effects
Waveshapers
Dynamics
Compressors
Expanders
Limiters
Gates
Feel free to suggest changes to make it easier to use. I can drop in the
new taxonomy without changing any code. As soon as we decide on a new
structure I will distribute a new .rdfs file then you can just copy it
over the old one and try it out.
- Steve
Has anybody been able to fully utilize this sound card using ALSA? I've been
able to set up analog recording. But during playback apparently the ALSA
mixer does not have all of the volume controls necessary. The card, as you
may or may not know, has an external "break-out-box" with just about all of
the internal sound card's inputs and outputs (very convenient btw). I'm able
to control the left and right channels using the master volume control, but
the card also has rear, center, and subwoofer channels as separate outputs.
I believe I've found the volume controls for all of those except the
subwoofer channel. I've tried every volume knob but the subwoofer never
registers a signal. If anybody out there has this sound card and has been
able to use the subwoofer channel under Linux I would appreciate some help.
Thanks,
Rolando.
On Fri, 04 Apr 2003 15:59:00 -0500
Cris Lyon <chris.lyon(a)spritenote.co.uk> wrote:
> I have altered the make files and loaded up Motif et al. and the file
> now make and make install run with no errors.
> Upon restarting the machine I find in /var/log/syslog
>
> /lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
> unresolved symbol unregister_sound_dsp
> /lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
> unresolved symbol unregister_sound_midi
> /lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
> unresolved symbol register_sound_dsp
> /lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o:
> unresolved symbol register_sound_midi
> modprobe: insmod
> /lib/modules/2.4.19-16mdkenterprise/kernel/drivers/sound/usbua100.o failed
Hi Chris !
These symbols are exported from the sound-core-module, which you have to
load.
Do a "depmod -a" as root to update your modules-dependency files.
Then load your driver again with "modprobe usbua100". This should load all
required drivers. If not, you have to list all dependencies of usbua100
explicitly in /etc/modules.conf (man modules.conf).
> I'm a bit stumped here because I don't understand how the .o file can be
> prduced if there are un-resolved sysmbols.
An Object file is produced by the assembler, not the linker.
If you link a prog, the linker puts together the o-files if he can resolve
all symbols; in case of a kernel-module insmod/modprobe look if all symbols
are resolved.
> I also notice I have no audio facilites listed in the Mandrake Control
> Centre. Does this machine believe it has no audio, and could somebody
> please elaborate if at all possible?
No sound-core -> No usbua100 -> no audio facilites ...
Regards,
Norbert
Hi all,
I'm using an m-audio quattro usb soundcard with my laptop using alsa 0.9.2.
I'm experiencing the audio device periodically shutting down - I have to
unplug and plug in the usb cable a few times before it comes back up.
It is better than it was - I was getting system freezes with a previous
version of alsa, so it sounds like the driver might be the culprit.
I just wondered if anyone else has experienced this problem, and might have
found a solution. It only occurs every hour or so of use, it's quite intermittent.
cheers,
dave
Hello people,
I am thinking of getting a Sound Blaster Live. But I want to be sure
that there are Linux drivers supporting its Sound Font hardware synth
and its S/P DIF digital output.
So, are there such drivers and of so - which ones?
The alsa-project.org page on SB Live says "MIDI on SB live drive not
working properly". Does this mean that Sound Font sytnth will NOT work
on SB Live?
--
Best regards,
Mikhail mailto:mr@ramendik.ru
How come I get "cracks" in my sound when using spiralloop? When
recording the output, there are no cracks in the wav-file...
It seems to me the cracks are produced in some way by
HD-read/write-operations. Is this correct? Howto get rid of them?
Thx.
hi all,
I just got the newest freqtweak and it consistently crashes upon loading a preset. It does not matter whether the preset has been saved with some previous version or current.
here's gdb output:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 32771 (LWP 1381)]
FTspectralManip::processDelay (this=0x8151798, procpath=0x8151730,
data=0x8161870) at FTspectralManip.cpp:820
820 *rdest = data[i] + (*rcurr)*feedback;
IS anyone else experiencing this? I wouldn't be surprised if it was only me.
ciao
./MiS
Hi,
Does anyone use Gravis Ultrasound under Linux?
I inserted gus.o and it is working, by only in mono and without bass and treble control.
What can I do?
P.S. Sorry for my English
Peter
galan-0.3.0-test2 is released.
galan is a modular synthesizer featuring subpatches, event processing
logic and more.
LADSPA is supported.
you can build your own synthesizer interface, placing controls where you
want them.
I have ported the features added to the galan-0.2 branch up to the 0.3
branch.
- Lib directory is in place.
- liblrdf support.
- feedbacksafe delay added which enables you to have plugins in the
feedback path like in ams.
opengl does not work.
i have some troubles with the gtkglarea 1.99.0...
this caused me not to implement multiple jack output ports...
i have now given up on opengl and will add the multi outputs/inputs
next.
if you want opengl use galan-0.2... 0.2.15 will be released soon, when
the sheet library is updated and reorganized.
--
torben Hohn
http://galan.sourceforge.net -- The graphical Audio language
HI sounding bees,
I use my laptop(linux) to record speech with stereo microphones.
The problem is on playing sound back using "cat filename >/dev/dsp",
the output from left speaker is much louder than the right speaker.
The sample file is recorded using "cat /dev/dsp> filename".
I tried the gain settings in aumix, but the problem persisted.
The mp3 songs sounds good with xine.
Any suggestions?
New bee,
Rajdeep
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail