Linux-audio-user

linux-audio-user@lists.linuxaudio.org

3 participants
20662 discussions

by Hendrik

Hi, I have a few questions about Session Management in an Arch Linux system. I want to use seq24 to control hydrogen and yoshimi, which works fine. However, when I save the session (I tried qjackctl and Non Session Manager) and reload it the order of the ALSA MIDI ports gets mixed up. This leads to drum patters played via yoshimi instead of hydrogen, for example. A while ago I tried to install claudia from AUR but it depends on ladish, and that is not available (ladish.org is down). Is ladish dead? If someone could point me into the right direction I would highly appreciate it. cheers, Hendrik -- hendrik@yoda:~$ gpg --fingerprint 40712948 pub 1024D/40712948 2007-12-29 Key fingerprint = CFA8 6C10 9F31 A6F5 AE9B A8C1 2919 4D76 4071 2948

10 years, 3 months

Interfacing an electric guitar

by jonetsu＠teksavvy.com

Hello all, Just got an electric guitar. First time. Now putting on a new set of strings. Got a 1/4" wire and a passive direct box that's already used for a Wavedrum. Got also a small guitar amp with an headphone out jack, as an option. The audio card is a M-Audio 1010LT. Can I simply take the 1/4" wire from the passive direct box and connect it to the guitar ? I believe there's a guitar processing app out there called something like rackarrack or such. Does this work through jackd as in doing the audio routing using qjackctl ? Alternatively if I want the amp's sound and processing, I can simply use the amp's headphone out, although I'd like to try the computer based only interface and processing. Cheers.

10 years, 3 months

Running a JACK application with cron et al.

by F. Silvain

Hey hey everyone, is there a way to do it? I tried, but didnt get any sound. I suspect, that cron doesn't use the user, who defined the task to be run? My system is Debian Squeeze, my JACK is 0.121.3 . My scheduler is anacron version 2.3. JACK applications normally run just fine under my user. any hints and suggestions are welcome and appreciated! Thank you! Ta-ta ---- Ffanci * Homepage: https://freeshell.de/~silvain * Twitter: http://twitter.com/ffanci_silvain * GitHub: https://github.com/fsilvain

10 years, 3 months

The Soft Center - music from Studio D

by Dave Phillips

Greetings, Another contemplative piece. https://soundcloud.com/davephillips69/the-soft-center Downloads enabled. Best, dp

10 years, 3 months

[ANN] Summer'15 release frenzy pt.2 - Qsampler 0.3.1 is out!

by Rui Nuno Capela

The Summer'15 release frenzy continues... ;) On the wake of LinuxSampler 2.0.0 release [1], Qsampler 0.3.1 is out! [2] And it lands at the precise moment sourceforge.net outage disaster [5] is still going through hopefully out of recovery hell. Also worth noting is that Qsampler [2] is now raked as a genuine Qt5 [3] application, leaving Qt4 behind but still an option. Qsampler [2] is a LinuxSampler [1] GUI front-end application written in C++ around the Qt [3] framework using Qt Designer. Website: http://qsampler.sourceforge.net (still unavailable [5] at this time :() Downloads: - source tarballs: http://download.linuxsampler.org/packages/ http://download.linuxsampler.org/packages/qsampler-0.3.1.tar.bz2 - binary packages: http://download.linuxsampler.org/packages/rpms/ http://download.linuxsampler.org/packages/rpms/qsampler-0.3.1-16.rncbc.suse… http://download.linuxsampler.org/packages/rpms/qsampler-0.3.1-16.rncbc.suse… Change-log: - Fixed configure script's Qt include directory lookup for some 64bit Linux flavours. - Prefer Qt5 over Qt4 by default with configure script. - A new top-level widget window geometry state save and restore sub-routine is now in effect. (EXPERIMENTAL) - Fixed for some strict tests for Qt4 vs. Qt5 configure builds. License: Qsampler [2] is free, open-source software, distributed under the terms of the GNU General Public License (GPL [4]) version 2 or later. See also: http://www.rncbc.org/drupal/node/914 References: [1] http://www.linuxsampler.org [2] http://qsampler.sourceforge.net [3] http://qt.io [4] http://www.gnu.org/copyleft/gpl.html [5] http://sourceforge.net/blog/sourceforge-infrastructure-and-service-restorat… Enjoy && have fun! -- rncbc aka. Rui Nuno Capela

10 years, 3 months

How to disable Ardour's phone home option?

by Ralf Mardorf

Hi, Ardour 4.1-1 for Arch Linux is build with "Phone home: True", see Help -> About -> Config. https://www.archlinux.org/packages/extra/x86_64/ardour/ I don't no were and how to configure "Phone home: False". To the PKGBUILD from ABS I added --phone-home=false to "python2 waf configure". [rocketmouse@archlinux ardour]$ diff PKGBUILD.old PKGBUILD 8c8 < pkgrel=1 --- > pkgrel=2 33a34 > --phone-home=false \ This results in "waf: error: --phone-home option does not take a value". How can phone home be disabled? Is recompiling needed? Perhaps there's also an option by the preferences I missed. [rocketmouse@archlinux ardour]$ cat PKGBUILD.old #[snip] python2 waf configure --prefix=/usr \ --configdir=/etc \ --with-backends="jack,alsa" \ --libjack=weak \ --optimize \ --docs #[snip] Regards, Ralf

10 years, 4 months

Coral - music from Studio D

by Dave Phillips

Greetings, http://soundcloud.com/davephillips69/coral A harmless tonal exercise. Description on the SC page. Downloads enabled. Best, dp

10 years, 4 months

Re: [LAU] Music Made with Linux: Election (Atte)

by tom haddington

> > Hi > > I just finished a new track for my a773 project, called Election. Hope > you enjoy! > > https://soundcloud.com/a773/election > > Cheers > -- > Atte > > http://atte.dk http://a773.dk > > > Thank you for sharing, Atte! i thoroughly enjoyed that. It's probably a silly question, but did you make it with Renoise and Redux? It's quite a powerful argument! Thank you, again! bill

10 years, 4 months

Music Made with Linux: Election

by Atte

Hi I just finished a new track for my a773 project, called Election. Hope you enjoy! https://soundcloud.com/a773/election Cheers -- Atte http://atte.dk http://a773.dk

10 years, 4 months

[ANN] QjackCtl 0.4.0 is out!

by Rui Nuno Capela

Hi all, as in through the hottest of summers--as southerners can't even wait--here comes part one: QjackCtl 0.4.0 (summer'15) is out! though aside that everybody knows this already, QjackCtl is a (maybe not so any more but) simple Qt [3] application to control the JACK [2] sound server, for the Linux Audio infrastructure. website: http://qjackctl.sourceforge.net downloads: http://sourceforge.net/projects/qjackctl/files - source tarball: http://download.sourceforge.net/qjackctl/qjackctl-0.4.0.tar.gz - source package: http://download.sourceforge.net/qjackctl/qjackctl-0.4.0-23.rncbc.suse132.sr… - binary packages: http://download.sourceforge.net/qjackctl/qjackctl-0.4.0-23.rncbc.suse132.i5… http://download.sourceforge.net/qjackctl/qjackctl-0.4.0-23.rncbc.suse132.x8… Change-log: - Some windows fixes added (patch by Kjetil Matheussen, thanks). - Most advanced Setup/Settings are moved into new Setup/Advanced settings tab; limit range for the real-time priority setting, now having 6 as absolute minimum valid value (after patches by Robin Gareus, thanks). - A new top-level widget window geometry state save and restore sub-routine is now in effect (EXPERIMENTAL) - Delayed geometry setup for widget windows upon startup has been deprecated and scrapped altogether. - Setup/settings dialog tab is going into some layout changes; also got rid of old patchbay auto-refresh timer cruft, which was previously hidden/disabled. - New socket names are now automatically inferred from selected client names while on the Patchbay widget, Socket dialog. - Fixed for some strict tests for Qt4 vs. Qt5 configure builds. - German (de) translation update (by Guido Scholz, thanks). License: QjackCtl stands free, still open-source software, distributed under the terms of the GNU General Public License (GPL [4]) version 2 or later. Weblog (upstream support): http://www.rncbc.org See also: http://www.rncbc.org/drupal/node/912 References: [1] QjackCtl - A JACK Audio Connection Kit Qt GUI Interface http://qjackctl.sourceforge.net [2] JACK Audio Connection Kit http://jackaudio.org [3] Qt framework, C++ class library and tools for cross-platform application and UI development http://qt.io/ [4] GPL - GNU General Public License http://www.gnu.org/copyleft/gpl.html Enjoy && have a whole hot'ta Summer'15 fun! -- rncbc aka. Rui Nuno Capela

10 years, 4 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user