Linux-audio-user May 2003

linux-audio-user@lists.linuxaudio.org

101 participants
106 discussions

[linux-audio-user] OT: Minidisc help needed

by Joe Hartley

Well, I did something amazingly stupid - I erased the MiniDisc that I had recorded my son's band's performace on. (3 songs: an original, Blitzkreig Bop, and Anarchy in the UK - I'm so proud!!) I'm looking for someone who has a MiniDisc recorder capable of performing the trick of rewriting the table of contents as listed here: http://www.minidisc.org/cloning_procedure.html Help me go from zero to hero with my son!! If you've got a deck listed on that site, please drop me a line - you'll have my extreme gratitude. -- ====================================================================== Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com Without deviation from the norm, "progress" is not possible. - FZappa

20 years, 11 months

[linux-audio-user] audio cdrom permissions

by derek holzer

i've been having a bit of trouble with playing and ripping CDs, maybe someone here can help? i'm running Debian on a laptop, and as root i don't have any serious problems doing either, but as a user it becomes a bit wierd... let me explain... as user, i am in groups cdrom and disk. i have set permissions as follows: in /dev: lr-xr-xr-x 1 root root 13 May 18 17:31 cdrom -> cdroms/cdrom0 drwxr-xr-x 1 root root 0 Jan 1 1970 cdroms in /dev/cdroms lr-xr-xr-x 1 root root 34 Jan 1 1970 cdrom0 -> ../scsi/host1/bus0/target0/lun0/cd in /dev/scsi/host1/bus0/target0/lun0/ brw-rw-rw- 1 root cdrom 11, 0 Jan 1 1970 cd i have none of these other cdrom devices listed in /dev: /dev/hdc /dev/sr0 /dec/scd0 but my drive appears to be ATAPI with SCSI emulation. i have added the following to my /etc/lilo.conf to reflect this: append="hdc=ide-scsi" although commenting this out doesn't seem to do much. i can rip CDs as a user with Grip, but RipperX tells me i need permission to access the CD drive [cannot open cdrom drive]. i can play CD audio with Alsaplayer, but not with XMMS. likewise, xfreecd doesn't find the drive, but workman does. very inconsistant! running cdparanoia -vQ as user gives the following: Checking /dev/cdrom for cdrom... Testing /dev/cdrom for cooked ioctl() interface /dev/scsi/host1/bus0/target0/lun0/cd is not a cooked ioctl CDROM. Testing /dev/cdrom for SCSI interface No generic SCSI device found to match CDROM device /dev/scsi/host1/bus0/target0/lun0/cd it seems that there are still some permissions to change somewhere, but i can't for the life of me figure out where! what have i missed? thanks, derek

20 years, 11 months

[linux-audio-user] [Fwd: [Ardour-users] pitch raise?]

by Patrick Shirkey

I see a similar problem while using the pitch scaler. I thought it might have been the harmonics of the tone I was using and the fact I had it echoing before scaling. But it only worked at the lowest settings moving any of the faders more than a small bit caused it to max out and kill all the audio in tX until I turned it down again. -- Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com Http://www.djcj.org - The Linux Audio Users guide ======================================== Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done. Goldie, 8 Nov, 2002 The Scotsman

20 years, 11 months

[linux-audio-user] Re: Frustrated, small review on sequencers :(

by Robert Jonsson

Hi Juan >Hi, I basically write this because i'm pretty frustrated >Today I wanted to learn how to use a typical sequencer >(I mantain my own midi sequencer, but it's not very typical) >I simply wanted a sequencer that supports a track editor >and a pianoroll. > >So I went and checked some. Tried to see if I could >get stuff done with any of them, so In order of what I tried, >I'll list them here in the order I used them: > ..snip.. > >MUSE: > >This one looked pretty good at the begining, but >some things I dont like. First of all, it didnt detect >the midi devices properly, as i had to go and reset >them in the midi ports menu. > I guess you are talking about external midi devices? >MIDI input worked >some times, and some others it didnt, and the >overall interface is pretty UNintuitive. Many >essential parts of the program lack proper shortcuts, >and the ability to customize them (like rosegarden). >I spent the most time with MUSE, trying to figure >out how to do things. In most cases it took me a while >but it wasnt bad, just strangely organized (like the track >menu, the way you add tracks, the master tempo). >The pianoroll looks good, but it lacks a lot of keyboard >support, and also Painting events doesnt seem to be >working, as i cant paint no matter how much I try. >Documentation is too basic to learn how to use the >program efficiently. It also crashes a lot, but >on more specific situations. > MusE has always been the platform I've favoured, and with the current status of things I don't think this will change anytime soon. Considering your critisism I realise that you are probably right about alot of usability issues, I've used it too long, I no longer think about the quirks it has ;). I understand though that it can be a major obstacles for new users (together with lacking documentation). I'd be very happy for any suggestions you might have about usability enhancement (or anything else for that matter). You mentioned for instance keyboard shortcuts and customizability which is duly noted (and master tempo which is a long standing usability problem). You mentioned trouble to do certain things, do you remember if there where other "things" than those mentioned? If you have more, please send it along. Of course that goes for others also! Regards, Robert

20 years, 11 months

RE: [linux-audio-user] usb midi midiman 8x8

by Joachim Backhaus

> Something we've noticed is that aconnect is seeing > ports 0 -> 8. Of course that would appear to be nine > i/o ports. Is that correct? I think one port is for SMPTE, so it seems to be correct. Regards, J.Backhaus > > --- Clemens Ladisch <clemens(a)ladisch.de> wrote: > > R Parker wrote: > > > Do you see any advantage to using a pci card or > > usb; > > > is interupt overhead lower in one or the other, > > etc, > > > etc,? > > > > USB has a latency of 1ms due to the frame-based > > communications, the > > latency on the PCI bus is certainly lower. > > > > > > HTH > > Clemens > > > > > > > __________________________________ > Do you Yahoo!? > The New Yahoo! Search - Faster. Easier. Bingo. > http://search.yahoo.com >

20 years, 11 months

[linux-audio-user] newbie q: making a machine

by Jonathan Segel

hi, i'm a recent linux user, coming from mac universe. i started by putting YDL on one of my old macs last summer, but now i'm gonna get serious. so my question is: what parts would you recommend for making a Linux box to run audio on? i realize this is a big field, but any clues are helpful. also, i'm probably going to use redhat, given that my ydl exprerience is based on redhat. any precautionary measures? thanks all -- _________________________________________________________________ Jonathan Segel -- MAGNETIC -- PO Box 460816 S.F. CA. 94146-0816 4014 Brookdale Ave. Oakland, CA 94619 jsegel(a)magneticmotorworks.com <-----> magsatellite(a)yahoo.com http://www.MagneticMotorworks.com tel (510) 534 7825 cell (510) 484 7415 fax (425) 955 4495

20 years, 11 months

Re: [Jackit-devel] Re: [linux-audio-user] low latency

by Patrick Shirkey

Patrick Shirkey wrote: Sorry I missed the refernce to lockup in the previous note. It should be replaced with "xruns". > So this is the revised version. Antti - could you add this to the jack > FAQ and I will link to it in the low latency howto. > > > > To reduce the audio buffer overruns while using JACK under certain > conditions. It has been found that mounting /tmp/jack as tmpfs (in RAM) > solves the problems that many people have experienced with LOCKUPS << here > while using JACK.The solutions mentioned above (and below) help when > your /tmp directory is mounted on a journalled filesystem. > > Just put this in your /etc/fstab > > none /tmp/jack tmpfs defaults 0 0 > > There is also a compile option to enable JACK to place its FIFOs on a > ram-based filesystem follows: > --------------------------------------------------------------- > # mkdir /mnt/ramfs > > [edit /etc/fstab and add the following line] > none /mnt/ramfs tmpfs defaults 0 0 > > Then use --with-default-tmpdir=/mnt/ramfs to the JACK configure > line when you build it. No clients need to be recompiled. > ---------------------------------------------------------------- > > -- Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com Http://www.djcj.org - The Linux Audio Users guide ======================================== Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done. Goldie, 8 Nov, 2002 The Scotsman

20 years, 11 months

[linux-audio-user] iMic using ALSA

by Alexander Carôt

HI to all, I was just checking the Macintosh USB iMic using ALSA-USB-driver. The device gets recognized but I don't get sound from it. Does anyone have experience with it and knows where the trouble could be ? Gracias -- A l e x

20 years, 11 months

[linux-audio-user] Frustrated, small review on sequencers :(

by Juan Linietsky

Hi, I basically write this because i'm pretty frustrated :) Today I wanted to learn how to use a typical sequencer (I mantain my own midi sequencer, but it's not very typical) I simply wanted a sequencer that supports a track editor and a pianoroll. So I went and checked some. Tried to see if I could get stuff done with any of them, so In order of what I tried, I'll list them here in the order I used them: Rosegardern (KDE version): This program looks very, very nice and professional, It makes a lot of sense to me when I use it, and the keyboard support is fantastic and intuitive. It detected my midi devices and got them ready to work automatically, but unfortunatedly, but some things I dont understand very well, and the documentation isnt very detailed Also, the pianoroll doesnt seem to be nearly as worked on as the staff sheet editor. What turned me out of this program is mainly that it's very, VERY unstable. A lot of things I try to do get it to crash almost instantly. I suppose i'll wait a while until it becomes more usable. MUSE: This one looked pretty good at the begining, but some things I dont like. First of all, it didnt detect the midi devices properly, as i had to go and reset them in the midi ports menu. MIDI input worked some times, and some others it didnt, and the overall interface is pretty UNintuitive. Many essential parts of the program lack proper shortcuts, and the ability to customize them (like rosegarden). I spent the most time with MUSE, trying to figure out how to do things. In most cases it took me a while but it wasnt bad, just strangely organized (like the track menu, the way you add tracks, the master tempo). The pianoroll looks good, but it lacks a lot of keyboard support, and also Painting events doesnt seem to be working, as i cant paint no matter how much I try. Documentation is too basic to learn how to use the program efficiently. It also crashes a lot, but on more specific situations. Brahms: Totally wicked interface, and I _hate_ the fact that relies on ARTS, It seems pretty basic, so I didnt give this much of a chance, didnt detect a simple thing (midi/audio). JAZZ++ Saw some screenshots, looked-like-motiff. Didnt even want to try it. In short, I didnt find anything I could use and be efficient with. Since the last time I evaluated this software, probably a year ago, I saw several improvements on each, and the addition of a lot of new features. Feature-wise, I can easily say that rosegarden and muse are way ahead of programs such as cubase or cakewalk from not more than 2 or 3 years ago, but I think their main problem is consistency and lack of documentation on "how to use this" and "how to use this efficiently". So I propose something, i dont know if anyone writes professional music with these. Does anyone use such programs at all Could you post project files for these, and would you like to explain in brief how do you use them efficiently? Thanks and my apoligies if i said something being misinformed. Cheers! Juan Linietsky

20 years, 11 months

[linux-audio-user] [OT] ? DVD questions

by Dave Phillips

Greetings: I have to write some documentation on DVD/VCD players for Linux. I own a nice new DVD player (dmesg says it's a LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive) that works well on my machine, though I did have to discover a few secrets for glitch-free viewing (e.g. my nVidia card should have its double-buffering turned off). I'm writing not only about viewing video discs but also recording and ripping them. Thus, a few questions for anyone in the LAU community using a DVD player and/or recorder. 1. What software do you use for viewing DVDs ? 2. Do you use that software for watching AVI, MPEG, or other video formats ? 3. What software do you use for ripping/encoding DVDs ? 4. If you have a DVD recorder, please let me know how well it works for you under Linux, what outstanding problems exist, what software you use, etc. 5. Overall, how would you rate Linux DVD support, particularly compared to Windows or the Mac ? I don't own a DVD recorder and I'm curious about Linux users' experiences with them. I've been trying to rip DVDs using the dvd::rip software (based on transcode) but keep receiving read errors. If anyone has any special tips for DVD ripping I'm interested in them too. My system includes an 800 MHz AMD CPU, two 15GB hard drives (tuned), 512 MB RAM, an SBLive soundcard, and an nVidia GForce2 (64 MB video RAM). Kernel is 2.4.18 patched for low-latency. I've been using MPlayer 0.90 for viewing AVI and other video file formats. I was using MPlayer for watching DVDs too but have recently switched to Ogle (a better DVD player, IMO). Frame rate is normally between 24 and 29 fps (that's what MPlayer reports, I don't really know if it's any different under Ogle). I don't really know how to massage MPlayer's parameters, so any advice for improving video file playback performance is most welcome. Ogle is pretty straightforward, and the Ogle FAQ yielded some very useful tips (particularly the pointer to the xvattr utility). So, how's *your* DVD player performing under Linux ? :) Best regards, == Dave Phillips The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm The Linux Soundapps Site at http://linux-sound.org

20 years, 11 months

← Newer
1
2
3
4
5
6
7
8
9
10
11
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user May 2003