Hi
On the page http://www.alsa-project.org/~iwai/awedrv.html there's a
called AWE Control Panel app that is a "A Gnome based GUI program for
controlling AWE by John van der Kamp. SoundFont files can be loaded via
this program together with control of bass, treble and default
chorus/reverb depths."
But unfortunately the link to it is dead. Does somebody know where i can
found it?
Thanks
Lucio
Hi!
I got Planet CCRMA installed on FC 3 yesterday and just started
recording some tracks with Ardour. What LADSPA plugins would you
recommend for vocals and guitar? I'm doing mainly pop/rock tunes. What
plugins have you used for this kind of music? I would like to hear your
experiences.
I have M-Audio Delta 66 with Omni I/O vocal/guitar pre-amp and I would
like to experiment by pluggin my guitar into pre-amp only rather than
putting a mic in front of my Vox guitar amplifier and recording it that
way. This way I could record guitars without disturbing my neighbours.
The guitars I use are Gretsch hollow body models (6118 & 6136). The 6136
sounds pretty nice even acousticly.
Thank you very much for your suggestions!
On Fri, 07 Jan 2005 13:19 , Pasi Karppinen <pasi.karppinen(a)pp6.inet.fi> sent:
>Hi!
>
>I got Planet CCRMA installed on FC 3 yesterday and just started
>recording some tracks with Ardour. What LADSPA plugins would you
>recommend for vocals and guitar? I'm doing mainly pop/rock tunes. What
>plugins have you used for this kind of music? I would like to hear your
>experiences.
>
My favorites for vocals - Gverb for mono tracks, Freeverb for stereo, Tape
Delay Simulation, SC4, occasionally TAP Stereo Echo for Haas effect, occasionally
TAP Fractal Doubler.
My favorites for guitar - Gverb/Freeverb, TAP Stereo Echo (Haas effect), TAP
Chorus, SC4. Most of this for acoustic and rhythm guitars. I hardly ever do
anything to the lead guitar.
>I have M-Audio Delta 66 with Omni I/O vocal/guitar pre-amp and I would
>like to experiment by pluggin my guitar into pre-amp only rather than
>putting a mic in front of my Vox guitar amplifier and recording it that
>way. This way I could record guitars without disturbing my neighbours.
>
I find it usually sounds better using the mic. I do have a Behringer V-amp
pro that is really nice for recording guitar. Musician's Friend is selling these
now for $169US. Well worth it. I first ran into one of these in a recording
studio in Ft Lauderdale FL and was really impressed by how real it sounds.
Jan
On Fri, 7 Jan 2005 13:30 , Kjetil Svalastog Matheussen
<k.s.matheussen(a)notam02.no> sent:
>
>Jan Depner:
>>> I just had a bad experience with FC3 nfs-exporting an XFS partition.
>>> Very unstable. However, it only happens when exporting the filesystem
>>> as nfs. I searched the web, and it seems like the bug is not in the
>>> xfs filesystem, but somewhere else in the 2.6 kernel triggered by
>>> the combination of xfs and nfs. (My "solution" to the problem was to use
>>> reiserfs)
>>>
>>> So please, don't be scared by my experience unless you are going to
>>> nfs-export the partition. It should be a safe and stable filesystem.
>>>
>> Interesting. We're running five 3.5TB servers with FC3 and xfs with
>>no problems.
>
>Really? I could hardly boot with that combination. Its a 1.25TB server
>using an Intel srcs16 controller. Tried both kernel 2.6.9-1.667smp
>and 2.6.9-1.667. Which kernel and controller are you using?
>(The machine is still not set into production, and I would like to have
>it running xfs if possible.)
>
>
Linux alh-pogo5 2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST 2004 i686 i686 i386
GNU/Linux
Dual 3GHz Xeons, Dual PCI bus, 8GB memory, two 3ware 9500 controllers.
Jan
On Thu, 06 Jan 2005 23:31 , Eric Dantan Rzewnicki <eric(a)zhevny.com> sent:
>Jan Depner wrote:
>> On Thu, 2005-01-06 at 11:36, Kjetil Svalastog Matheussen wrote:
>>>Barton Bosch:
>> Interesting. We're running five 3.5TB servers with FC3 and xfs with
>> no problems.
>
>Just curious ... Jan, what kind of storage system are those using? are
>they somesort of SATA raid? inside the server or an external unit?
>
PogoLinux S316s. They use two 3ware serial ATA RAID controllers with sixteen
250GB disk dirves. It gives you two 1.75TB drives.
Jan
Em Sex 07 Jan 2005 03:38, Gilles Degottex escreveu:
> I changed something in the next version
> (http://download.gna.org/fmit/fmit-0.9.9.tar.bz2), maybe it will help
> (sorry if I cant be more precise, but keep me informed)
>
I Download the new version. Now the problem is other:
$ ./configure
<some output>
Now type 'make', followed by 'make install' as root.
$ make
<some output>
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -Wall -I../libs -I../ui
-I/usr/lib/qt/include -DQT_THREAD_SUPPORT -I/usr/X11R6/include -O3
-ffast-math -DCAPTURE_ALSA -DCAPTURE_JACK -MT GLFormants.o -MD -MP -MF
".deps/GLFormants.Tpo" -c -o GLFormants.o GLFormants.cpp; \
then mv -f ".deps/GLFormants.Tpo" ".deps/GLFormants.Po"; else rm -f
".deps/GLFormants.Tpo"; exit 1; fi
In file included from GLFormants.cpp:174:
/usr/X11R6/include/GL/glut.h:63:1: warning: "APIENTRY" redefined
In file included from /usr/lib/qt/include/qgl.h:79,
from GLFormants.h:25,
from GLFormants.cpp:19:
/usr/X11R6/include/GL/gl.h:99:1: warning: this is the location of the
previous
definition
GLFormants.cpp: In member function `virtual void GLFormants::paintGL()':
GLFormants.cpp:238: error: conversion from `QString' to non-scalar type `
std::basic_string<char, std::char_traits<char>, std::allocator<char> >'
requested
GLFormants.cpp:275: error: conversion from `QString' to non-scalar type `
std::basic_string<char, std::char_traits<char>, std::allocator<char> >'
requested
make[2]: ** [GLFormants.o] Erro 1
make[2]: Leaving directory `/home/seguro/audio/tuner/fmit-0.9.9/src'
make[1]: ** [all-recursive] Erro 1
make[1]: Leaving directory `/home/seguro/audio/tuner/fmit-0.9.9'
make: ** [all] Erro 2
$
Not working yet...
André Alves Pereira
Guys, guys! Don't waste money on "oxygen-free" cables or other scams.
http://www.roger-russell.com/wire/wire.htm
And: if you use balanced cables (most of the soundcards mentioned, e.g. RME and Delta 1010 have balanced "tip-ring-sleeve" connections) you can have very long runs with no audible difference. I regularly use microphone cables in excess of 1000 meters, in my job as an audio mixer for broadcast sports, and the sound is hum-free and good enough for broadcast. Line-level audio signals will go even further- and if you can hear or measure a difference you have golden Bat ears.
-Steiny
(510)907-0897
----- Original Message -----
From: "Andreas Kuckartz" <A.Kuckartz(a)ping.de>
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Feasibility of Crestron like Linux BasedWholeHouse Audio System - Multisource / Multizone Capable????
Date: 5 Jan 2005 22:43:03 +0100
>
> Florin Andrei wrote:
>
> > But it might be ok, though, to run high-
> > amplitude analog signal over lengthy cables. I.e., speaker signal.
> > At those amplitudes and impedances, there's only a very low risk of
> > picking up noise.
>
> You do not pick up noise but the longer the speaker cables the higher their
> capacitance and their resistance. There also are other strange distortions
> happening due to cables. All of this can influence the sound:
>
> "Speaker cable needs to have a very low electrical resistance, so
> it needs to be
> fairly hefty and made from a pure material, such as oxygen-free copper (OFC).
> Impure material can introduce nonlinearities (the oxidised copper actually
> behaves as a semiconductor) that manifest themselves as increased
> distortion at
> low signal levels. There are many cables that qualify, including 30A 'cooker'
> mains cable, but a sensibly priced, heavy-duty speaker cable is easier to use
> and looks nicer. If the cable resistance is more than a tiny
> fraction of an Ohm,
> the amplifier's damping factor is compromised and also the loudspeaker's
> frequency response can be affected. The reason for this is that a
> loudspeaker's
> impedance varies with frequency, but if this impedance is placed in
> series with
> a significant fixed cable resistance it acts as a potential divider, and the
> power delivered to the loudspeaker at different frequencies will be altered
> slightly."
> (http://www.soundonsound.com/sos/jan02/articles/faq0102.asp#Anchor-32729)
>
> (It might be difficult to convince people who intend to buy expensive golden
> speaker cables to use Linux and a little bit of digital hardware
> instead but one
> could try :-)
>
> Cheers,
> Andreas
--
___________________________________________________________
Sign-up for Ads Free at Mail.comhttp://promo.mail.com/adsfreejump.htm
When that framework is "opensourced", well, I too would be interested in
participating and I am good at it :-).
Problem is that to get into this, a company needs a business plan far
different than conventional. Sun has a two-tiered approach: Sell Star Office
to those who want support, give out OpenOffice to the rest of us. Sun,
however, is in the computer business.
Mackie is basically a hardware house. I wish I could afford a nice mixer panel
from them. Will it be profitable for them, after the giveaway ends, to sell
Tracktion and add-ons for it, remains to be seen (as this is not really their
focus and maintaining software can be a pain (and resource drain) in the
butt). Opensourcing the whole kitandkaboodle and selling related/dedicated
hardware for it might be an alternative (and the giveaway might just be
testing these waters).
Antoine,
> > I think I am heading in this direction. Please let me know if there are
> > specific types of control you'd like to see.
> OSC?
I'm dimly aware of OSC, but have yet to wrap my head around the potential
advantages of it. I know that Jesse Chappell uses it in SooperLooper. Can you
give me an example application?
Thanks,
-Mercury
Jan Depner:
>> I just had a bad experience with FC3 nfs-exporting an XFS partition.
>> Very unstable. However, it only happens when exporting the filesystem
>> as nfs. I searched the web, and it seems like the bug is not in the
>> xfs filesystem, but somewhere else in the 2.6 kernel triggered by
>> the combination of xfs and nfs. (My "solution" to the problem was to use
>> reiserfs)
>>
>> So please, don't be scared by my experience unless you are going to
>> nfs-export the partition. It should be a safe and stable filesystem.
>>
> Interesting. We're running five 3.5TB servers with FC3 and xfs with
>no problems.
Really? I could hardly boot with that combination. Its a 1.25TB server
using an Intel srcs16 controller. Tried both kernel 2.6.9-1.667smp
and 2.6.9-1.667. Which kernel and controller are you using?
(The machine is still not set into production, and I would like to have
it running xfs if possible.)
--